Print Email Facebook Twitter An Automated Design Approach for High-Lift Systems incorporating Eccentric Beam Actuators Title An Automated Design Approach for High-Lift Systems incorporating Eccentric Beam Actuators Author Steenhuizen, D. Van Tooren, M.J.L. Faculty Aerospace Engineering Department Aerodynamics, Wind Energy & Propulsion Date 2010-09-13 Abstract In order to asess the merit of novel high-lift structural concepts to the design of contemporary and future transport aircraft, a highly automated design routine is elaborated. The structure, purpose and evolution of this design routine is set-out with the use of Knowledge-Based Engineering techniques. As a case-study, the automated design of the Eccentric Beam Actuator is treated here, but the developed routine is meant to be applicable in a generic fashion, allowing for other concepts in the future. To reference this document use: http://resolver.tudelft.nl/uuid:8d114164-ed06-477e-9c1d-1284f668c00f DOI https://doi.org/10.2514/6.2010-9179 Publisher American Institute of Aeronautics and Astronautics (AIAA) ISBN 978-1-60086-954-9 Source 13th AIAA/ISSMO Multidisciplinary Analysis Optimization Conference, Fort Worth, Texas, 13-15 September 2010; AIAA 2010-9179 Part of collection Institutional Repository Document type conference paper Rights © 2010 American Institute of Aeronautics and Astronautics Files PDF Steenhuizen_2010.pdf 875.92 KB Close viewer /islandora/object/uuid:8d114164-ed06-477e-9c1d-1284f668c00f/datastream/OBJ/view