Optimisation of Floating Offshore Wind Substructures: A Higher-Fidelity Approach

Optimisation of Floating Offshore Wind Substructures: A Higher-Fidelity Approach

Klootwijk, Bart (TU Delft Aerospace Engineering)

Viré, A.C. (mentor)
Savenije, F.J. (mentor)
von Terzi, D.A. (graduation committee)
la Rocca, G. (graduation committee)

Delft University of Technology

Aerospace Engineering

2023-12-06

Floating offshore wind turbines (FOWTs) unlock the potential to harness energy from wind in deeper waters. Despite their potential, the major obstacle to large-scale commercial deployment remains the floating substructure's high cost. Multidisciplinary design, analysis and optimisation techniques are commonly employed to improve their cost-competitiveness, but existing models often use simplified engineering models. This approach risks neglecting design considerations typical of structures subjected to complex aero-hydro-servo-elastic loads.

To address the need for incorporating higher-fidelity analysis methods, an optimisation framework is developed, integrating OpenFAST to simulate the response of the FOWT system under various environmental and operational conditions. Leveraging the flexibility of the Python framework and the wealth of output data contained within the OpenFAST simulation results, this holistic approach offers opportunities to explore novel and cost-effective platform designs with high reliability.

To demonstrate its effectiveness, the optimisation framework is utilised to achieve a significant reduction of the DeepCWind platform's structural mass. Among the considered constraints, the platform pitch motion was critical, reaching maxima for design load cases characterised by the most extreme wind and waves. Although the inclusion of a structural model for the platform comes at considerable computational expense, it enhances the framework's value, as structural integrity can be verified.

The recommended use of the optimisation framework is for in-depth studies, following preliminary design explorations conducted with cheaper models. Future efforts should focus on extending the structural and hydrodynamic model to improve the framework's versatility, and make it applicable to a wider range of platform concepts and turbine sizes.

Optimisation
Floating offshore wind turbine (FOWT)
OpenFAST
NEMOH
Hydrodynamics
Structural Modelling

http://resolver.tudelft.nl/uuid:a707f4de-77f5-4553-b9bc-71d15f847581

Student theses

master thesis

© 2023 Bart Klootwijk