Concept design for floating offshore wind turbine installation with the Pioneering Spirit

Concept design for floating offshore wind turbine installation with the Pioneering Spirit: A systems engineering approach

van Heusden, Joep (TU Delft Mechanical, Maritime and Materials Engineering)

Kana, A.A. (graduation committee)
Polinder, H. (mentor)
Zwaginga, J.J. (mentor)
Terlouw, V.C. (mentor)
Steenhuis, A.L.J. (mentor)

Delft University of Technology

Offshore and Dredging Engineering | Marine Technology | Ship Design, Production and Operations

2023-07-14

Due to the growing demand for offshore wind energy and the increasing wind turbine sizes, a shortage of capable installation vessels is anticipated by 2024. Consequently, the utilisation of heavy-lift vessels, previously not employed for bottom-founded or floating offshore wind turbine installations, may become imperative to realise the offshore wind project pipeline. Therefore, this study analyses the technical and economic feasibility of installing floating wind turbines with the largest construction vessel in the world named the Pioneering Spirit. For this, the concept development stage of the systems engineering method was applied, consisting of three successive phases. Firstly, in the Needs Analysis phase, valuable insights regarding the operational environment were obtained, resulting in operational requirements for the concept design. Secondly, in the Concept Exploration phase, these requirements were used for generating multiple alternative concept options after which the most promising concepts were selected for further analysis through a trade-off analysis. Lastly, in the Concept Definition phase, the technical feasibility, workability and economic feasibility were evaluated for the selected concepts. The technical feasibility was assessed by creating storyboards for the different installation procedures, determining the stability of the barge named the Iron Lady for different load cases and providing technical descriptions of performed operations and required equipment. Furthermore, the workability was estimated by comparing statistical wave and wind data with the environmental limits for various operations obtained through literature, previous projects and a motion analysis model. Subsequently, with the storyboards and workability results, the economic feasibility was determined with a model that included estimations of the vessel and fuel costs for constructing a reference wind farm located at a variable distance to shore. Ultimately, it was found that Spar- and TLP-type floating wind turbines are of most interest for the concept design and that the Pioneering Spirit is in principle capable of installing the corresponding pre-assembled foundations and wind turbines relating to a capacity of 15 megawatt with a single-lift operation. Furthermore, this research gives valuable insights that extend beyond the initial scope of this paper. Since the performance implications of the selected concepts related to the workability assessment and economic feasibility study can directly be linked to specific design choices and limitations. This, in combination with the exploration of floating wind turbine installation with alternative lifting equipment, can be used to provide recommendations for future designs of purpose-built vessels in this sector. Finally, the methodology used in this study could be applied to evaluate the feasibility of other potential concepts for deployment in this area.

Ship Design
Systems Engineering
Concept Development
Floating Offshore Wind Turbine Installation
Technical Feasibility
Economic feasibility
Trade-off Analysis
Storyboards
Stability
Workability

http://resolver.tudelft.nl/uuid:c1ddd00f-8f4c-4a63-a959-b766f99d4380

2025-07-14

Student theses

master thesis

© 2023 Joep van Heusden