A degradable mode I cohesive zone model developed for damage and fracture analysis of dissimilar composite/metal adhesive joints subjected to cyclic ageing conditions

Moazzami, M.; Akhavan-Safar, A.; Ayatollahi, M. R.; Poulis, J.A.; da Silva, L. F.M.; Teixeira De Freitas, S.

doi:10.1016/j.tafmec.2023.104076

A degradable mode I cohesive zone model developed for damage and fracture analysis of dissimilar composite/metal adhesive joints subjected to cyclic ageing conditions

Title

A degradable mode I cohesive zone model developed for damage and fracture analysis of dissimilar composite/metal adhesive joints subjected to cyclic ageing conditions

Author

Moazzami, M. (TU Delft Structural Integrity & Composites; Iran University of Science and Technology)
Akhavan-Safar, A. (Universidade do Porto)
Ayatollahi, M. R. (Iran University of Science and Technology)
Poulis, J.A. (TU Delft Structural Integrity & Composites)
da Silva, L. F.M. (Universidade do Porto)
Teixeira De Freitas, S. (TU Delft Structural Integrity & Composites)

Date

2023

Abstract

Adhesive joints are frequently exposed to cyclic ageing conditions during their service life, which can have a substantial impact on the mechanical properties of both the adhesive and the substrates. The safe life philosophy, commonly employed in the design of bonded joints, underscores the importance of obtaining an accurate estimate of the adhesive's durability. Therefore, it is essential to enhance the predictive capabilities of the adhesive's mechanical behavior under cyclic ageing conditions. This research aims to expand the use of quasi-static cohesive zone modelling (CZM) for damage and fracture analysis of dissimilar adhesive joints subjected to cyclic ageing environments. The first step involved measuring the mechanical properties of the adhesive through tensile tests on unaged and cyclically aged dogbone specimens, considering their moisture content and ageing cycles. Based on the results, a degradable CZM was developed. To validate the numerical model, dissimilar double cantilever beam specimens (DCBs) of glass fibre reinforced polymer (GFRP) and aluminium were manufactured and tested before and after ageing. The load-displacement curves of the bi-materials bonded joints were successfully predicted using the developed model where the properties of the material are defined as a function of the moisture uptake and ageing cycles at each material element. The obtained results showed that after 4 ageing cycles, the maximum load of DCB specimens decrease considerably.

Subject

Cohesive zone modelling
Cyclic ageing
Dissimilar adhesive joints
Mode I
Moisture diffusion

To reference this document use:

http://resolver.tudelft.nl/uuid:dffbcfe6-2839-4120-9dd9-26a69323d43d

DOI

https://doi.org/10.1016/j.tafmec.2023.104076

ISSN

0167-8442

Source

Theoretical and Applied Fracture Mechanics, 127

Part of collection

Institutional Repository