Nanoimprinting for high-throughput replication of geometrically precise pillars in fused silica to regulate cell behavior

Nanoimprinting for high-throughput replication of geometrically precise pillars in fused silica to regulate cell behavior

Ganjian, M. (TU Delft Biomaterials & Tissue Biomechanics)
Modaresifar, K. (TU Delft Biomaterials & Tissue Biomechanics)
Rompolas, Dionysios (Student TU Delft)
Fratila-Apachitei, E.L. (TU Delft Biomaterials & Tissue Biomechanics)
Zadpoor, A.A. (TU Delft Biomaterials & Tissue Biomechanics)

2022

Developing high-throughput nanopatterning techniques that also allow for precise control over the dimensions of the fabricated features is essential for the study of cell-nanopattern interactions. Here, we developed a process that fulfills both of these criteria. Firstly, we used electron-beam lithography (EBL) to fabricate precisely controlled arrays of submicron pillars with varying values of interspacing on a large area of fused silica. Two types of etching procedures with two different systems were developed to etch the fused silica and create the final desired height. We then studied the interactions of preosteoblasts (MC3T3-E1) with these pillars. Varying interspacing was observed to significantly affect the morphological characteristics of the cell, the organization of actin fibers, and the formation of focal adhesions. The expression of osteopontin (OPN) significantly increased on the patterns, indicating the potential of the pillars for inducing osteogenic differentiation. The EBL pillars were thereafter used as master molds in two subsequent processing steps, namely soft lithography and thermal nanoimprint lithography for high-fidelity replication of the pillars on the substrates of interest. The molding parameters were optimized to maximize the fidelity of the generated patterns and minimize the wear and tear of the master mold. Comparing the replicated feature with those present on the original mold confirmed that the geometry and dimensions of the replicated pillars closely resemble those of the original ones. The method proposed in this study, therefore, enables the precise fabrication of submicron- and nanopatterns on a wide variety of materials that are relevant for systematic cell studies. Statement of significance: Submicron pillars with specific dimensions on the bone implants have been proven to be effective in controlling cell behaviors. Nowadays, numerous methods have been proposed to produce bio-instructive submicron-topographies. However, most of these techniques are suffering from being low-throughput, low-precision, and expensive. Here, we developed a high-throughput nanopatterning technique that allows for control over the dimensions of the features for the study of cell-nanotopography interactions. Assessing the adaptation of preosteoblast cells showed the potential of the pillars for inducing osteogenic differentiation. Afterward, the pillars were used for high-fidelity replication of the bio-instructive features on the substrates of interest. The results show the advantages of nanoimprint lithography as a unique technique for the patterning of large areas of bio-instructive surfaces.

Electron beam lithography
Osteogenic patterns
Soft lithography
Thermal nanoimprint lithography

http://resolver.tudelft.nl/uuid:41ac8ee7-440c-4027-b0ca-42f1899059ea

https://doi.org/10.1016/j.actbio.2021.12.001

1742-7061

Acta Biomaterialia, 140, 717-729

Institutional Repository

journal article

© 2022 M. Ganjian, K. Modaresifar, Dionysios Rompolas, E.L. Fratila-Apachitei, A.A. Zadpoor