A ±4-A High-Side Current Sensor With 0.9% Gain Error From −40 °C to 85 °C Using an Analog Temperature Compensation Technique

Journal article (2018)

Authors

L. Xu Electronic Instrumentation - EEMCS
J.H. Huijsing Electronic Instrumentation - EEMCS
K.A.A. Makinwa Microelectronics
Kofi A.A. Makinwa Microelectronics
Research Group
Electronic Instrumentation (EEMCS) (TU Delft)
Copyright: © 2018 L. Xu, J.H. Huijsing, K.A.A. Makinwa
DOI: https://doi.org/10.1109/JSSC.2018.2875106
More Info
expand_more

Published Date

2018

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Faculty

Electrical Engineering, Mathematics and Computer Science

Department

Microelectronics

Research Group

Electronic Instrumentation

Abstract

This paper presents a fully integrated shunt-based current sensor that supports a 25-V input common-mode range while operating from a single 1.5-V supply. It uses a highvoltage beyond-the-rails ADC to directly digitize the voltage across an on-chip shunt resistor. To compensate for the shunt’s large temperature coefficient of resistance (∼0.335%/°C), the
ADC employs a proportional-to-absolute-temperature voltage reference. This analog compensation scheme obviates the need for the explicit temperature sensor and calibration logic required by digital compensation schemes. The sensor achieves 1.5-μVrms noise over a 2-ms conversion time while drawing only 10.9 μA from a 1.5-V supply. Over a ±4-A range, and after a one-point trim, the sensor exhibits a 0.9% (maximum) gain error from −40 °C to 85 °C and a 0.05% gain error at room temperature.

Files

47098920_08502850.pdf
(pdf | 2.48 Mb)
Unknown license

Download not available

A_4_A_High_Side_Current_Sensor... (pdf)
(pdf | 2.45 Mb)
- Embargo expired in 30-03-2022
Unknown license