Pages
- 1
- 2
- document
-
Remmerswaal, G. (author), Hicks, M.A. (author), Vardon, P.J. (author)The material point method (MPM) is used to model both rotational and horizontal sliding failure mechanisms of dykes under external (water) loading. To model the different failure mechanisms, an external hydrostatic water pressure has been applied on the canal side of the dyke by applying a newly developed boundary condition. The boundary...conference paper 2019
- document
-
Gard, W.F. (author), Van de Kuilen, J.W.G. (author), Cabrera de Diego, M. (author)Hydraulic timber structures such as mooring poles, fenders, lock gates and jetties are widely-used in inner and sea harbours all over the world. In general these structures give satisfactory performance with regard to the technical requirements. Because of the harsh exposure conditions such as brackish and contaminated water, drying-out,...conference paper 2014
- document
- Gard, W.F. (author), Montaruli, N.E. (author), Van de Kuilen, J.W.G. (author) conference paper 2012
- document
-
Kassapoglou, C. (author)The increased use of advanced composite materials on primary aircraft structure has brought back to the forefront the question of how such structures perform under repeated loading. In particular, when damage or other stress risers are present, tests have shown that the load to cause failure after a given number of cycles is a decreasing...doctoral thesis 2012
- document
-
De Rijck, J.J.M. (author)The two historical fuselage failures, Comet in 1954 and Aloha in 1988, illustrate that similar accidents must be avoided which requires a profound understanding of the fatigue mechanisms involved, including analytical models to predict the fatigue behavior of riveted joints of a fuselage structure. The scope of the research project covers a...doctoral thesis 2005
- document
-
De Vries, T.J. (author)Glare laminates are materials that consist of alternating aluminium and glass prepreg layers especially designed for aeroplane structures. The result is a material that combines the properties of its constituents and the properties of a bonded structure. Some of the favourable characteristics of Glare are its fatigue, impact and fire resistance...doctoral thesis 2001
- document
-
Van de Kuilen, J.W.G. (author)Timber joints that have been preloaded for 2 to 8 years have been short term tested in accordance with EN 26891. The applied load levels varied between 30% and 50% of the average short term strength. The study comprised nailed, toothed-plate and split-ring joints. All joints were made of spruce and loaded in tension. The test results indicated...journal article 1999
- document
-
Hashagen, F. (author), De Borst, R. (author)In this contribution numerical models are discussed for describing failure mechanisms in fibre metal laminates. Fibre metal laminates form a new class of materials which are considered for a possible application to the fuselage of future aircraft generations. The intensive experimental analyses of these materials are focused on the assessment of...journal article 1998
- document
- Weide, J. van der (author), Smith, G.M. (author) report 1995
- document
- Vlot, A. (author) report 1995
- document
- Klein Breteler, M. (author) report 1994
- document
- Smith, G.M (author) report 1994
- document
- Wouters, J (author) report 1993
- document
-
Labonté, S. (author), Wiggenraad, J.F.M. (author)A preliminary investigation is reported of the development of a Structure Relevant (SR-) specimen, which maintains the essential features of a stiffened panel configuration, in order to study damage growth behavior at limited cost. Several SR-specimens were fabricated, damage was applied, either through impacts or by the insertion of artificial...report 1993
- document
-
van der Hoeven, W. (author)Residual strength tests were performed on ARALL panels consisting of ARALL3 (3/2) laminates with bonded-on doublers. In particular, the effect of the doubler geometry (shape and thickness) on the residual strength was investigated. Prior to residual strength testing all panels were fatigue loaded to create a realistic type of damage, i.e. cracks...report 1992
- document
- Vroeg, J.H. de (author) report 1992
- document
- Klein Breteler, M. (author) report 1991
- document
- Chen, D. (author) doctoral thesis 1991
- document
- Chen, D. (author) report 1990
- document
-
't Hart, W.G.J. (author), Frijns, R.H.W.M. (author)Constant amplitude tension-compression fatigue tests were performed on notched (± 45, 02, 90, 02)s coupon specimens of the composite systems T300/F593, T400H/6376, T800H//5245C and IM6/APC-2. Delamination damage growth as a function of the number of fatigue cycles was determined using the ultrasonic C-scan technique. Considering the resistance...report 1989
Pages
- 1
- 2