Searched for: +
(81 - 100 of 150)

Pages

document
Apostolidis, P. (author), Liu, X. (author), Marocho, Paul (author), van de Ven, Martin (author), Erkens, S. (author), Scarpas, Athanasios (author)
In-depth understanding of the synergetic effect between the various incorporating constituents in asphalt binders (e.g., polymers, fillers) is needed to design durable paving materials with desired properties. In this research, the focus was first on the effect of the reactivity of fillers on the evolution of adhesive strength between stone...
journal article 2020
document
Sun, Z. (author), Kasbergen, C. (author), van Dalen, K.N. (author), Anupam, K. (author), Scarpas, Athanasios (author), Erkens, S. (author)
Pavements generally demand necessary maintenance and rehabilitation to maintain their service performance in the whole lifespan. The maintenance and rehabilitation strategies are usually formulated based on the results of non-destructive testing, in which the traffic speed deflectometer (TSD) test is an efficient tool for pavement structural...
conference paper 2020
document
Stouthamer, Esther (author), Erkens, Gilles (author), Cohen, Kim (author), Hegger, Dries (author), Driessen, Peter (author), Weikard, Hans Peter (author), Hefting, Mariet (author), Hanssen, R.F. (author), Fokker, Peter A. (author), Akker, Jan van den (author), van Rijswick, Marleen (author)
In the Netherlands land subsidence is a continuously ongoing process. Consequently, an increasing number of people and economic assets are exposed to subsidence, damage costs are soaring, and flood risk and greenhouse gas emissions are increasing. In some areas tipping points have already been reached, where current land-use can no longer be...
conference paper 2020
document
Jing, R. (author), Varveri, Aikaterini (author), van Lent, D.Q. (author), Erkens, S. (author)
Ageing of bituminous materials contributes to various forms of pavement failures, thus leading to the degradation of pavement performance. To understand the evolution of pavement performance, the development of a proper laboratory protocol to simulate long-term ageing process of asphalt mixtures is of uppermost importance. In this study, the...
conference paper 2020
document
Zhang, H. (author), Anupam, K. (author), Scarpas, Athanasios (author), Kasbergen, C. (author), Erkens, S. (author)
In the Netherlands, more than 80% of the highways are surfaced by porous asphalt (PA) mixes. The benefits of using PA mixes include, among others, the reduction of noise and the improvement of skid resistance. However, pavements with PA mixes are known to have a shorter lifetime and higher maintenance costs as compared with traditional dense...
journal article 2020
document
Apostolidis, P. (author), Liu, X. (author), Erkens, S. (author), Scarpas, Athanasios (author)
In epoxy-bitumen systems, temperature contributes to the development of physiochemical and mechanical characteristics during curing (chemical hardening) and at the long-term service (oxidative aging) of pavement structures. Hardening (i.e., chemical or oxidative controlled) is a complex phenomenon in epoxy-modified binders and the in-depth...
journal article 2019
document
Erkens, S. (author), Varveri, Aikaterini (author), Verwaal, W. (author), van de Ven, Martin (author)
report 2019
document
Apostolidis, P. (author), Nahar, Sayeda (author), Liu, X. (author), Lommerts, Bert-Jan (author), Erkens, S. (author), Scarpas, Athanasios (author)
The utilization of epoxy-based polymers as bituminous modifiers in developing durable and long-lasting pavement structures have gained increasing interest over the last years showing evidence of high performing materials (1-8). It has been noticed that the addition of epoxy-based modifier into bitumen lead to materials with superior...
conference paper 2019
document
Zegard, A. (author), Smal, L. (author), Naus, R. (author), Apostolidis, P. (author), Liu, X. (author), van de Ven, Martin (author), Erkens, S. (author), Scarpas, Athanasios (author)
The addition of epoxy modifier in bitumen is a relatively new modification technology (1-4) and the most critical epoxy polymerization-induced changes of the epoxy-bituminous materials are not fully understood. Different phenomena take place when epoxy modifiers are incorporated into bitumen and they are dependent on the material hardening...
conference paper 2019
document
Apostolidis, P. (author), Liu, X. (author), Zhang, M (author), van de Ven, Martin (author), Erkens, S. (author), Scarpas, Athanasios (author)
The addition of epoxy modifier in bitumen is a relatively new modification technology (1-4) and the most critical epoxy polymerization-induced changes of the epoxy-bituminous materials are not fully understood. Different phenomena take place when epoxy modifiers are incorporated into bitumen and they are dependent on the material hardening...
conference paper 2019
document
Apostolidis, P. (author), Daniel, Gerald C. (author), Liu, X. (author), Erkens, S. (author), Scarpas, Athanasios (author)
The utilization of synthetic fibers has been reported in the past (1-8) showing enhancement of fatigue and thermal cracking resistance in asphaltic materials. However, the limited evidences about the benefits of these fibres in asphaltic materials at low material scales have been noticed. Also, the exact reinforcing mechanism of binding system...
conference paper 2019
document
Zhang, Yi (author), Liu, X. (author), Apostolidis, P. (author), Gard, W.F. (author), van de Ven, Martin (author), Erkens, S. (author), Jing, R. (author)
As bitumen oxidizes, material stiffening and embrittlement occur, and bitumen eventually cracks. The use of anti-oxidants, such as lignin, could be used to delay oxidative aging and to extend the lifetime of asphalt pavements. In this study, the chemical and rheological effect of lignin on bitumen was evaluated by using a single dosage organsolv...
journal article 2019
document
Daniel, C.G. (author), Liu, X. (author), Apostolidis, P. (author), Erkens, S. (author), Scarpas, Athanasios (author)
The use of synthetic fibres has been reported to enhance the performance of asphalt pavement materials in terms of permanent deformation, fatigue and thermal cracking. However, limited results about the benefits of synthetic fibres in the reinforced warm-mix asphaltic materials, and the exact mechanism of reinforcing the binding part in pavement...
conference paper 2019
document
Wang, H. (author), Liu, X. (author), Apostolidis, P. (author), Erkens, S. (author), Scarpas, Athanasios (author)
Crumb rubber modified bitumen (CRMB) has been utilized in the asphalt paving industry for decades due to its various benefits. The main mechanisms of bitumen-crumb rubber interaction include rubber particle swelling and chemical degradation. Crumb rubber modifier (CRM) swelling plays a dominant role in controlling the property development of...
journal article 2019
document
Apostolidis, P. (author), Liu, X. (author), van de Ven, Martin (author), Erkens, S. (author), Scarpas, Athanasios (author)
Epoxy modification of asphalt binders has been recognized as a very effective technology to alter the chemistry of asphaltic materials in such a way that long-lasting pavement structures can be designed. However, the phenomena that are involved to build up the physico-mechanical properties of epoxy asphalt systems are still unknown. The focus of...
journal article 2019
document
Jing, R. (author), Varveri, Aikaterini (author), Liu, X. (author), Scarpas, Athanasios (author), Erkens, S. (author)
Oxidative aging takes place in bituminous materials during the construction and service life of asphalt pavements and has a significant effect on their performance. In this study, porous asphalt cores were obtained from field test sections each year from 2014 to 2017. The evolution of the properties of the field cores and the recovered bitumen...
journal article 2019
document
Sun, Z. (author), Kasbergen, C. (author), Scarpas, Athanasios (author), Anupam, K. (author), van Dalen, K.N. (author), Erkens, S. (author)
In order to design high-performance roadways, a robust tool which can compute the structural response caused by moving vehicles is necessary. Therefore, this paper proposes a spectral element method-based model to accurately and effectively predict the 3D dynamic response of layered systems under a moving load. A layer spectral element and a...
journal article 2019
document
Apostolidis, P. (author), Liu, X. (author), van de Ven, Martin (author), Erkens, S. (author), Scarpas, Athanasios (author)
Induction heating driven polymerisation is an in-situ curing technique for epoxy-asphalt systems that maintains most of the advantages of temperature-driven polymerisation and it solves the need for longer curing time periods at lower temperatures before traffic can be allowed. In particular, induction heating can be utilised to accelerate the...
journal article 2019
document
Zhang, H. (author), Anupam, K. (author), Scarpas, Athanasios (author), Kasbergen, C. (author), Erkens, S. (author)
Within the pavement engineering community, porous asphalt (PA) mixes are regarded as mixes capable of reducing noise and improving wet skid resistance. However, these mixes are likely to have the distress of ravelling. In order to analyse the propensity of a given PA mix for ravelling, the homogenisation technique can be considered as an...
journal article 2019
document
Jing, R. (author), Varveri, Aikaterini (author), Liu, X. (author), Scarpas, Athanasios (author), Erkens, S. (author)
Ageing has a significant impact on the chemical and mechanical properties of bituminous materials. In this study, Fourier Transform Infrared (FTIR) spectrometer and Dynamic Shear Rheometer (DSR) tests were utilised to investigate the effect of ageing on the chemical and rheological properties of bitumen. Bitumen films with thickness of 2 mm...
journal article 2019
Searched for: +
(81 - 100 of 150)

Pages