- document
-
Mol, J.A. (author)This thesis describes a series of experiments on the electronic properties of individual shallow dopant atoms in silicon. Shallow dopants are impurity atoms that bind either a single electron or hole and can therefore be con- sidered as the solid state analogue to the hydrogen atom. As the transistor density increases, critical device dimensions...doctoral thesis 2012
- document
-
Koleva, D.A. (author), Taheri, P. (author), Tsvetkova, N. (author), Boshkov, N. (author), Van Breugel, K. (author), De Wit, J.H.W. (author), Mol, J.M.C. (author)This paper reports on the corrosion performance of composite zinc layers (~ 8µm) on a steel substrate, considering the influence of nano-aggregates and Cr(III) conversion layers, compared to control (only Zn layers) conditions. The main factors, influencing the corrosion performance of Zn in this study are: a) the effect of two concentrations of...journal article 2011
- document
-
Mol, J.A. (author), Van der Heijden, J. (author), Verduijn, J. (author), Klein, M. (author), Remacle, F. (author), Rogge, S. (author)Ternary logic has the lowest cost of complexity, here, we demonstrate a CMOS hardware implementation of a ternary adder using a silicon metal-on-insulator single electron transistor. Gate dependent rectifying behavior of a single electron transistor (SET) results in a robust three-valued output as a function of the potential of the single...journal article 2011
- document
- Javierre, E. (author), Garcia Espallargas, S.J. (author), Mol, J.M.C. (author), Vermolen, F.J. (author), Vuik, C. (author), Van der Zwaag, S. (author) conference paper 2011
- document
- Garcia Espallargas, S.J. (author), Fischer, H.R. (author), Gonzalez-Garcia, Y. (author), Mol, A.J.M.C. (author), Hughes, T. (author) conference paper 2011
- document
- De Graeve, I. (author), Muselle, T. (author), Scheltjens, G. (author), Brancart, J. (author), Gonzalez Garcia, Y. (author), Mol, J.M.C. (author), Van Assche, G. (author), Van Mele, B. (author), Terryn, H. (author) conference paper 2011
- document
-
Rocha, L.A. (author), Dias, R.A. (author), Cretu, E. (author), Mol, L. (author), Wolffenbuttel, R.F. (author)This paper describes an electro-mechanical auto-calibration technique for use in capacitive MEMS accelerometers. Auto-calibration is achieved using the combined information derived from an initial measurement of the resonance frequency and the measurement of the pull-in voltages during device operation, with an estimation of process-induced...journal article 2011
- document
-
Koleva, D.A. (author), Van Breugel, K. (author), Boshkov, N. (author), Mol, J.M.C. (author), De Wit, J.H.W. (author)This work reports on monitoring chloride-induced corrosion in reinforced mortar specimens, with and without addition of polymeric nano-aggregates in the mortar mixture. The investigation is a novel approach to control steel corrosion in reinforced concrete, hereby reporting the preliminary results, related to one of the main objectives: studying...journal article 2010
- document
-
Johnson, B.C. (author), Tettamanzi, G.C. (author), Yang, C. (author), Alves, A.D.C. (author), Van Donkelaar, J. (author), Thompson, S. (author), Verduijn, J. (author), Mol, J.A. (author), Wacquez, R. (author), Vinet, M. (author), Dzurak, A.S. (author), Sanquer, M. (author), Rogge, S. (author), Jamieson, D.N. (author)Deterministic doping is crucial for overcoming dopant number variability in present nano-scale devices and for exploiting single atom degrees of freedom. The development of determinisitic doping schemes is required. Here, two approaches to the detection of single ion impact events in Si-based devices are reviewed. The first is via specialized...journal article 2010
- document
-
Koleva, D.A. (author), Van Breugel, K. (author), Mol, J.M.C. (author), De Wit, J.H.W. (author)This work presents the preliminary tests on the performance of cathodic prevention (CPre) in reinforced mortar, subjected to aggressive (10% NaCl environment). Cathodic prevention is an electrochemical technique for minimizing, actually "preventing" any eventual corrosion of the steel bars in reinforced concrete. Therefore, the main objective of...journal article 2010
- document
- Koleva, D.A. (author), Van Breugel, K. (author), De Wit, J.H.W. (author), Mol, A. (author) journal article 2010
- document
- Johnson, B.C. (author), Alves, A. (author), Van Donkelaar, J. (author), Thompson, S. (author), Yang, C. (author), Jamieson, D. (author), Verduijn, A. (author), Mol, J. (author), Tettamanzi, G. (author), Rogge, S. (author), Wacquez, R. (author), Vinet, M. (author), Dzurak, A. (author) journal article 2010
- document
-
Johnson, B.C. (author), Tettamanzi, G.C. (author), Alves, A.D.C. (author), Thompson, S. (author), Yang, C. (author), Verduijn, J. (author), Mol, J.A. (author), Wacquez, R. (author), Vinet, M. (author), Sanquer, M. (author), Rogge, S. (author), Jamieson, D.N. (author)We demonstrate single dopant implantation into the channel of a silicon nanoscale metal-oxide-semiconductor field-effect-transistor. This is achieved by monitoring the drain current modulation during ion irradiation. Deterministic doping is crucial for overcoming dopant number variability in present nanoscale devices and for exploiting single...journal article 2010
- document
- Mol, J.J.D. (author) doctoral thesis 2010
- document
-
Klein, M. (author), Mol, J.A. (author), Verduijn, J. (author), Lansbergen, G.P. (author), Rogge, S. (author), Levine, R.D. (author), Remacle, F. (author)We provide an experimental proof of principle for a ternary multiplier realized in terms of the charge state of a single dopant atom embedded in a fin field effect transistor (Fin-FET). Robust reading of the logic output is made possible by using two channels to measure the current flowing through the device and the transconductance. A read out...journal article 2010
- document
-
Mol, L. (author), Rocha, L.A. (author), Cretu, E. (author), Wolffenbuttel, R.F. (author)This paper provides experimental validation of the predictions by two recent models for squeezed film damping in the free molecule regime. Measurements were carried out using a parallel-plate microstructure with a 2.29 ?m gap operated at pressures from 105 to 101 Pa (corresponding to Knudsen numbers from 0.03 to 300). Experiments are in good...journal article 2009
- document
-
Mol, L. (author), Rocha, L.A. (author), Cretu, E. (author), Wolffenbuttel, R.F. (author)Squeeze-film damping is highly inadequate in low-pressure systems or in systems where air pressure and/or gap dimensions are poorly defined. Input shaping has been used to circumvent the oscillations typically associated with under-damped mass-spring-damper systems and drastically decrease the settling time. The proposed method does not rely on...journal article 2009
- document
- Koleva, D.A. (author), Van Breugel, K. (author), Mol, J.M.C. (author), De Wit, J.H.W. (author) journal article 2009
- document
- Koleva, D.A. (author), Van Breugel, K. (author), Mol, J.M.C. (author), De Wit, J.H.W. (author) journal article 2009
- document
- Koleva, D.A. (author), Van Breugel, K. (author), Mol, J.M.C. (author), De Wit, J.H.W. (author) journal article 2009