- document
-
Wu, Meimei (author), Ge, W. (author), Li, Zongkun (author), Wu, Zening (author), Zhang, Hexiang (author), Li, Juanjuan (author), Pan, Yipeng (author)Despite the rapid development of risk analysis in dam engineering, there is a relative absence of research on the environmental impact of dam break. As a systematic theory, set pair analysis has a good effect in dealing with uncertainties, although the result is relatively rough and easy to distort. A connection degree of five grades and a...journal article 2019
- document
-
Ma, Yunjian (author), Li, Peilin (author), Li, Yongru (author), Willot, S.J. (author), Zhang, W. (author), Ribitsch, Doris (author), Choi, Young Hae (author), Verpoorte, Robert (author), Hollmann, F. (author)The use of natural deep eutectic solvents (NADES) as multifunctional solvents for limonene bioprocessing was reported. NADES were used for the extraction of limonene from orange peel wastes, as solvent for the chemoenzymatic epoxidation of limonene, and as sacrificial electron donor for the in situ generation of H <sub>2</sub> O <sub>2</sub>...journal article 2019
- document
-
Li, Z. (author), Zhang, Shizhe (author), Zuo, Y. (author), Chen, Wei (author), Ye, G. (author)Chemical deformation (chemical shrinkage/expansion), the absolute volume change during reactions, is a key parameter influencing the volume stability, especially the autogenous deformation of a binder material. This work, for the first time, reports an in-depth investigation on the chemical deformation of metakaolin based geopolymer (MKG)....journal article 2019
- document
-
Li, Y. (author), Zhang, Z. R. (author), Zhao, Z. Y. (author), Li, H. X. (author), Katgerman, L. (author), Zhang, J. S. (author), Zhuang, L. Z. (author)New 7xxx aluminum alloys with high alloying contents are being designed, which could induce serious hot tearing defects during direct-chill (DC) casting. Among all factors affecting hot tearing of 7xxx alloys, undoubtedly alloying elements play a significant role. In this study, the effect of main alloying elements (Zn, Mg, and Cu) on hot...journal article 2019
- document
-
Li, Bo (author), Zhang, Shizhe (author), Li, Qiu (author), Li, Neng (author), Yuan, Bo (author), Chen, Wei (author), Brouwers, H.J.H. (author), Yu, Qingliang (author)The uptake mechanism of heavy metal ions in layered double hydroxides (LDHs) is investigated in this paper via solid-solution exchange experiments and first principle study. The uptake capacities of C-LDHs for heavy metal ions from solutions are experimentally investigated and the structures of LDHs doped with various heavy metal ions are...journal article 2019
- document
-
Shan, Xinmeng (author), Wen, Jiahong (author), Zhang, Min (author), Wang, Luyang (author), Ke, Q. (author), Li, Weijiang (author), Du, Shiqiang (author), Shi, Yong (author), Chen, Kun (author)Extreme flooding usually causes huge losses of residential buildings and household properties, which is critical to flood risk analysis and flood resilience building in Shanghai. We developed a scenario-based multidisciplinary approach to analyze the exposure, losses and risks of residential buildings and household properties, and their...journal article 2019
- document
-
Li, Y. (author), Han, Qinglin (author), Horvath, I. (author), Zhang, Guangjun (author)An approach to repairing surface defects of metal parts is proposed, which includes a combined application of (i) groove machining, (ii) wire and arc additive manufacturing (WAAM), and (iii) finishing machining. The completed analysis revealed that (i) the inclination angle of the groove to be machined is strongly influenced by the...journal article 2019
- document
-
Zhao, Zhenqiang (author), Dang, Haoyuan (author), Xing, Jun (author), Li, X. (author), Zhang, Chao (author), Binienda, Wieslaw K. (author), Li, Yulong (author)The mechanical characterization of textile composites is a challenging task, due to their nonuniform deformation and complicated failure phenomena. This article introduces a three-dimensional mesoscale finite element model to investigate the progressive damage behavior of a notched single-layer triaxially-braided composite subjected to axial...journal article 2019
- document
-
Zhang, Jian (author), Sokolovskij, R. (author), Chen, Ganhui (author), Zhu, Yumeng (author), Qi, Yongle (author), Lin, Xinpeng (author), Li, Wenmao (author), Zhang, G. (author), Jiang, Yu-Long (author), Yu, Hongyu (author)In this paper, a method to extend the detection range of hydrogen sulfide (H<sub>2</sub>S) gas sensor is demonstrated. The sensor is based on AlGaN/GaN high electron mobility transistors (HEMTs) with Pt gate. It is observed that the as-fabricated devices exhibited sensing signal saturation at 30 ppm H<sub>2</sub>S exposure in dry air. A pre...journal article 2019
- document
-
Zhang, Shizhe (author), Zuo, Y. (author), Li, Z. (author), Ye, G. (author)Alkali-activated slag/fly ash (AASF) as an environmental-friendly binder system for construction materials has recently attracted great attention from both academic and industrial communities. Towards its wider engineering application, it is crucial to have a better understanding of the temperature induced effects by different curing regimes and...conference paper 2019
- document
-
Li, Y. (author), Lietaert, K. (author), Li, W. (author), Zhang, X.Y. (author), Leeflang, M.A. (author), Zhou, J. (author), Zadpoor, A.A. (author)The corrosion fatigue behavior of additively manufactured topologically ordered porous iron based on diamond unit cells was studied for the first time to understand its response to cyclic loading in a simulated physiological environment. The material exhibited high fatigue resistance with fatigue strengths being 70% and 65% of yield stress in...journal article 2019
- document
-
Ge, W. (author), Jiao, Yutie (author), Sun, Heqiang (author), Li, Zongkun (author), Zhang, Hexiang (author), Zheng, Yan (author), Guo, Xinyan (author), Zhang, Zhaosheng (author), van Gelder, P.H.A.J.M. (author)Dam breach has catastrophic consequences for human lives and economy. In previous studies, empirical models are often, to a limited extent, due to the inadequacy of historical dam breach events. Physical models, which focus on simulating human behavior during floods, are not suitable for fast analysis of a large number of dams due to the...journal article 2019
- document
-
Yuan, Ye (author), Tang, Xiuchuan (author), Zhou, Wei (author), Pan, W. (author), Li, Xiuting (author), Zhang, Hai Tao (author), Ding, Han (author), Goncalves, Jorge (author)Cyber-physical systems embed software into the physical world. They appear in a wide range of applications such as smart grids, robotics, and intelligent manufacturing. Cyber-physical systems have proved resistant to modeling due to their intrinsic complexity arising from the combination of physical and cyber components and the interaction...journal article 2019
- document
-
Ma, Yunjian (author), Li, Yongru (author), Ali, Shahid (author), Li, Peilin (author), Zhang, W. (author), Rauch, M.C.R. (author), Willot, S.J. (author), Ribitsch, Doris (author), Hollmann, F. (author)Natural deep eutectic solvents (NADES) are proposed as alternative solvents for peroxygenase-catalysed oxyfunctionalization reactions. Choline chloride-based NADES are of particular interest as they can serve as solvent, enzyme-stabiliser and sacrificial electron donor for the in situ H<sub>2</sub>O<sub>2</sub> generation. This report...journal article 2019
- document
-
Li, M. (author), Albayrak, A. (author), Zhang, Yu (author), van Eijk, D.J. (author), Yang, Zengyao (author)The usability now serves as a fundamental quality of a computational device, e.g. smartphone. Moreover, the smartphone has firmly embedded into our daily life as an indispensable part, so the context and style that user may interact with them are largely different from a decade ago. Nowadays, testing usability with end user has become a...conference paper 2019
- document
-
Zhang, Jiyi (author), Li, Gang (author), Liu, Youzhi (author), Yin, Pengcheng (author), Yu, Jinyu (author), Shi, Zhifeng (author)Since the introduction of the concept of 3D cadastre, a great many of significant research results have been done. To promote the development of 3D cadatre, 3D cadastre working group sponsored by International Federation Surveyors (FIG) commissions 3 and 7 was organized by Delft University of Technology in 2001. This working group provides a...conference paper 2018
- document
-
Yang, Yang (author), Li, Diquan (author), Tong, Tiegang (author), Zhang, D. (author), Zhou, Yatong (author), Chen, Yangkang (author)Strong noise is one of the toughest problems in the controlled-source electromagnetic (CSEM) method, which highly affects the quality of recorded data. The three main types of noise existing in CSEM data are periodic noise, Gaussian white noise, and nonperiodic noise, among which the nonperiodic noise is thought to be the most difficult to...journal article 2018
- document
-
Zhang, Baocheng (author), Teunissen, P.J.G. (author), Yuan, Yunbin (author), Zhang, Xiao (author), Li, Min (author)Sensing the ionosphere with the global positioning system involves two sequential tasks, namely the ionospheric observable retrieval and the ionospheric parameter estimation. A prominent source of error has long been identified as short-term variability in receiver differential code bias (rDCB). We modify the carrier-to-code leveling (CCL), a...journal article 2018
- document
-
Zhang, Baocheng (author), Teunissen, P.J.G. (author), Yuan, Yunbin (author), Zhang, Hongxing (author), Li, Min (author)Vertical total electron content (VTEC) parameters estimated using global navigation satellite system (GNSS) data are of great interest for ionosphere sensing. Satellite differential code biases (SDCBs) account for one source of error which, if left uncorrected, can deteriorate performance of positioning, timing and other applications. The...journal article 2018
- document
-
Huang, Yao (author), Deng, Leping (author), Ju, Pengfei (author), Huang, Luyao (author), Qian, H. (author), Zhang, Dawei (author), Li, Xiaogang (author), Terryn, H.A. (author), Mol, J.M.C. (author)In this study, a new self-healing shape memory polymer (SMP) coating was prepared to protect the aluminum alloy 2024-T3 from corrosion by the incorporation of dual-function microspheres containing polycaprolactone and the corrosion inhibitor 8-hydroxyquinoline (8HQ). The self-healing properties of the coatings were investigated via scanning...journal article 2018