Searched for: +
(1 - 20 of 137)

Pages

document
Zhu, Xuezhen (author), Zhang, Minghu (author), Shi, Jinyan (author), Weng, Yiwei (author), Yalçınkaya, Çağlar (author), Šavija, B. (author)
High-strength engineered cementitious composites (ECC) typically require higher cement content, which is negative from the sustainability point of view. To alleviate this problem, herein a low-cost and eco-friendly high-strength ECC (with a compressive strength of over 100 MPa) was developed, and diatomite was used to replace a small amount...
journal article 2024
document
Luan, Liping (author), Shi, Puxin (author), Wang, Zhi (author), Kapteijn, F. (author), Liu, Xinlei (author)
Novel membrane materials for H<sub>2</sub> separation are wanted. How to overcome the “trade-off” between membrane permeability and selectivity is a tough challenge. Here we report new random organic framework membranes with benzimidazole and imine linkages to form hierarchical channels. Both high H<sub>2</sub>-selective and fast H<sub>2</sub...
journal article 2024
document
Xu, Fuqiang (author), Song, Xianzhi (author), Li, Shuang (author), Shi, Yu (author), Song, G. (author), Lv, Zehao (author), Yi, Junlin (author)
In the long-term mining of geothermal resources in hot dry rock (HDR), the change of thermal stress and pore pressure will increase fracture conductivity evolution, further improving production performance. The optimization and decision-making of the development scheme based on the impact of damage from fractures have yet to be reported. The...
journal article 2024
document
He, K. (author), Shi, S. (author), van den Boom, A.J.J. (author), De Schutter, B.H.K. (author)
Approximate dynamic programming (ADP) faces challenges in dealing with constraints in control problems. Model predictive control (MPC) is, in comparison, well-known for its accommodation of constraints and stability guarantees, although its computation is sometimes prohibitive. This paper introduces an approach combining the two methodologies...
journal article 2024
document
Xu, Fuqiang (author), Shi, Yu (author), Song, Xianzhi (author), Wu, Wei (author), Song, G. (author), Li, Shuang (author)
The development of hot dry rocks (HDRs) is of great significance to adjusting energy structure, alleviating energy shortage, reducing pollution, etc. Low-permeability granite is the predominant rock type in deep HDRs, making fractures the primary pathways for fluid circulation and heat extraction. The production of HDRs is significantly...
journal article 2024
document
Zhang, Kaixuan (author), Shi, Zhaochen (author), Zujovic, Jana (author), de Ridder, H. (author), van Egmond, R. (author), Neuhoff, David L. (author), Pappas, T. (author)
We present a systematic approach for training and testing structural texture similarity metrics (STSIMs) so that they can be used to exploit texture redundancy for structurally lossless image compression. The training and testing is based on a set of image distortions that reflect the characteristics of the perturbations present in natural...
journal article 2024
document
Liu, Baoju (author), Ye, Huiwen (author), Jiang, Junyi (author), Shi, Jinyan (author), Yalçınkaya, Çağlar (author), Šavija, B. (author)
Crystalline admixture (CA) is an effective self-healing agent for mortar. However, the effects of crack parameters (i.e. crack width and cracking age) and the service environment on the self-healing behavior of CA-containing mortar are not well understood. Herein, the self-healing behavior of mortar containing a self-developed CA was assessed...
journal article 2024
document
Quispe Haro, Juan José (author), Chen, Fei (author), Los, R. (author), Shi, Shuqi (author), Sun, Wenjun (author), Chen, Yong (author), Idema, T. (author), Wegner, Seraphine V. (author)
The transition of bacteria from an individualistic to a biofilm lifestyle profoundly alters their biology. During biofilm development, the bacterial cell-cell adhesions are a major determinant of initial microcolonies, which serve as kernels for the subsequent microscopic and mesoscopic structure of the biofilm, and determine the resulting...
journal article 2024
document
Luo, Runding (author), Sun, Botao (author), Hou, Xinlan (author), Shi, Wenhua (author), Zhang, Kouchi (author), Fan, Jiajie (author)
This work employed the particle swarm optimization (PSO) algorithm to assess the trade-off between breakdown voltage (BV) and on-state resistance (R <i style="box-sizing: border-box;">DS,on</i> ) in 4H–SiC metal oxide semiconductor field effect transistors (MOSFET) for power devices. In this work, the numerical model obtained after analyzing...
journal article 2024
document
Shi, Xuyang (author), Chen, Shuzhao (author), Wang, Qiang (author), Lu, Yijun (author), Ren, S. (author), Huang, Jiandong (author)
As an environmentally responsible alternative to conventional concrete, geopolymer concrete recycles previously used resources to prepare the cementitious component of the product. The challenging issue with employing geopolymer concrete in the building business is the absence of a standard mix design. According to the chemical composition of...
journal article 2024
document
İlter, Yasin Kaan (author), Ünal, Uğur Oral (author), Shi, Weichao (author), Tokgoz, S. (author), Atlar, Mehmet (author)
Dimpled surfaces have gained increasing attention in recent years for their potential to reduce turbulent skin friction, a capability previously acknowledged for its beneficial implications on heat transfer. As a passive drag reduction method, dimpled surfaces offer significant advantages for marine applications due to their effectiveness and...
journal article 2024
document
Shi, Zhanchong (author), Liang, M. (author), Su, Qingtian (author), Kanstad, Terje (author), Ferrara, Liberato (author)
Rebar-reinforced coarse aggregate ultra-high-performance concrete (R-CA-UHPC) has been used in the construction of new structures and strengthening of deteriorated aged infrastructures, and it inevitably sustains tension. To study the tensile behavior of R-CA-UHPC members, axial tensile tests for dog-bone-shaped specimens were designed and...
journal article 2024
document
Zhang, Xinqi (author), Shi, Jihao (author), Yang, M. (author), Huang, Xinyan (author), Usmani, Asif Sohail (author), Chen, Guoming (author), Fu, Jianmin (author), Huang, Jiawei (author), Li, Junjie (author)
Long short-term memory (LSTM) has been widely applied to real-time automated natural gas leak detection and localization. However, LSTM approach could not provide the interpretation that this leak position is localized instead of other positions. This study proposes a leakage detection and localization approach by integrating the attention...
journal article 2023
document
Shi, Z. (author), Su, Q. (author), Kavoura, Dr. Florentia (author), Veljkovic, M. (author)
To establish the tensile constitutive model of ultra-high performance concrete containing coarse aggregate (CA-UHPC), monotonic and cyclic uniaxial tensile tests for CA-UHPC with fiber volume fractions of 2.5% and 2.0% were conducted. Test results showed that CA-UHPC exhibits approximately linear stress-strain relation up to the tensile strength...
journal article 2023
document
Wei, Xiaoguang (author), Liu, Y. (author), Shi, Jian (author), Gao, Shibin (author), Li, Xingpeng (author), Han, Zhu (author)
This article offers a novel perspective on identifying the critical branches under load redistribution (LR) attacks. Compared to the existing literature that is largely disruption-driven and based on dc state estimation, we propose to address the threat from LR attacks on a more fundamental level by modeling and analyzing the circulation of...
journal article 2023
document
Shi, S. (author), Cheng, Xiaodong (author), De Schutter, B.H.K. (author), Van den Hof, Paul M.J. (author)
In a dynamic network of interconnected transfer functions, it is not necessary to use all the node signals for estimating a local transfer function. Given the network topology, detailed conditions are available for selecting inputs and outputs in a (MIMO) predictor model that warrants consistent and minimum variance estimation of a target...
journal article 2023
document
Sun, Lingqi (author), Chen, K. (author), Geng, Peng (author), Zhou, Yan (author), Wen, Shifeng (author), Shi, Yusheng (author)
Porous NiTi lattice structures are widely used in the manufacture of crucial components owing to their excellent shape memory effect, superelasticity, and high damping capacities. However, the specific strength and lightweight characteristics of porous NiTi lattice structures fabricated by conventional technologies are limited by...
journal article 2023
document
Zhang, Xinqi (author), Shi, Jihao (author), Huang, Xinyan (author), Xiao, Fu (author), Yang, M. (author), Huang, Jiawei (author), Yin, Xiaokang (author), Sohail Usmani, Asif (author), Chen, Guoming (author)
Deep learning has been widely applied to automated leakage detection and location of natural gas pipe networks. Prevalent deep learning approaches do not consider the spatial dependency of sensors, which limits leakage detection performance. Graph deep learning is a promising alternative to prevailing approaches as it can model spatial...
journal article 2023
document
Shi, Weibo (author), Niu, Dongyu (author), Li, Z. (author), Niu, Yanhui (author)
The surface texture of asphalt pavement has a significant effect on skid resistance performance. However, its contribution to the performance of skid resistance is non-homogeneous and subjects to local validity. There are also a few deep learning models that take into account the effective contact texture region. This paper proposes a...
journal article 2023
document
Niu, D. (author), Shi, Weibo (author), Wang, C. (author), Xie, Xiwang (author), Niu, Yanhui (author)
Optimizing asphalt mix design at the indoor stage is of significant importance for enhancing the rutting resistance of asphalt mixture, which is affected by its structural characteristics. In this work, the coordination number of particle contact force (CN<sub>pcf</sub>) was proposed as an indicator to represent contact characteristics of...
journal article 2023
Searched for: +
(1 - 20 of 137)

Pages