- document
-
Li, Shizhen (author), Liu, Yang (author), Ye, H. (author), Liu, X. (author), Sun, Fenglian (author), Fan, Xuejun (author), Zhang, Kouchi (author)This paper studied the behaviors of sintering between Ag nanoparticle (NP) and nanoflake (NF) in the same size by molecular dynamics simulation. Before the sintering simulation, the melting simulation of NF was carried out to calculate the melting points of NFs and investigate the thermostability of NF. The Lindemann index and potential...journal article 2022
- document
-
Zhang, Boyang (author), Sun, Xiuxia (author), Lv, Maolong (author), Liu, Shuguang (author), Li, Le (author)In contrast with most existing results concerning unmanned aerial vehicles (UAVs) wherein material points or only attitude/longitudinal dynamics are considered, this article proposes a distributed fixed-time fault-tolerant control methodology for networked fixed-wing UAVs whose dynamics are six-degree-of-freedom with twelf-state-variables...journal article 2022
- document
-
Xin, Haohui (author), Li, Jie (author), Veljkovic, M. (author), Liu, Yuqing (author), Sun, Qing (author)Bolted joints in steel structures are generally subject to combined actions. The research on ultimate capacity of bolted joints under combined tension and shear actions, twin shear actions, and combined tension-twin shear actions is relatively limited. The aim of this paper is to calibrate the fracture locus of grade 10.9 bolts using the...journal article 2022
- document
-
Shao, X. (author), Yao, Weiran (author), Li, Xiaolei (author), Sun, Guanghui (author), Wu, Ligang (author)This letter investigates the direct trajectory optimization of the free-floating space manipulator (FFSM). The main purpose is to plan the joint space trajectories to reduce the spacecraft motion due to the joint rotation during the FFSM performing tasks. To improve the calculation efficiency, the adaptive Radau pseudospectral method (A-RPM)...journal article 2022
- document
-
Lai, F. (author), Liu, Songyu (author), Li, Yaoliang (author), Sun, Yanxiao (author)The development of installation technologies of open caissons has been lagging behind increasingly complex construction conditions. For such purpose, a new installation technology of large diameter deeply-buried (LDDB) open caissons has been developed and then used for construction of twin LDDB caissons into undrained ground with stiff soils...journal article 2022
- document
-
Lv, Miao (author), Li, Dongyi (author), Zhang, Zhaohan (author), Logan, Bruce E. (author), van der Hoek, J.P. (author), Sun, Muchen (author), Chen, Fan (author), Feng, Yujie (author)Magnetic seeding coagulation (MSC) process has been used to accelerate flocs sedimentation with an applied magnetic field, offering large handling capacity and low energy consumption. The interactions of three typical Al species, aluminum chloride (AlCl<sub>3</sub>), Al<sub>13</sub>O<sub>4</sub>(OH)<sub>24</sub><sup>7+</sup> polymer (Al<sub...journal article 2021
- document
-
Ren, Jie (author), Sun, Hongfang (author), Li, Qun (author), Li, Z. (author), Ling, Li (author), Zhang, Xiaogang (author), Wang, Yanshuai (author), Xing, Feng (author)One-part alkali-activated slag (AAS) binders are more promising in large-scale constructions because one-part mixing procedure is safer and easier to handle compared to normal two-part method. Thus, this study aims at investigating different properties of one-part AAS binders and control samples prepared using the two-part method. Experimental...journal article 2021
- document
-
Wang, Kai (author), Xu, Hao (author), Li, Jiayuan (author), Huang, Lianzhong (author), Ma, Ranqi (author), Jiang, X. (author), Yuan, Yupeng (author), Mwero, Ngome A. (author), Sun, Peiting (author), Negenborn, R.R. (author), Yan, Xinping (author)It is of significant importance to optimize the energy consumption of ships in order to improve economy and reduce CO<sub>2</sub> emissions. However, the energy use of ships is affected by a series of navigational environmental parameters, which have certain spatial and temporal differences and variability. Therefore, the dynamic...journal article 2021
- document
-
Gao, Weilun (author), Li, Dongxue (author), Wang, Zhengbing (author), Nardin, William (author), Shao, Dongdong (author), Sun, Tao (author), University, Beijing (author), Cui, Baoshan (author)River longitudinal profile, a key morphological characteristic of the river channel, is subject to river mouth progradation. Given the increasing influence of human activities and climate change on this critical downstream control, understanding its effects on the evolution of the longitudinal profile is imperative. A general theoretical...journal article 2020
- document
-
Sun, Y. (author), Kang, Xuanwu (author), Zheng, Yingkui (author), Wei, Ke (author), Li, Pengfei (author), Wang, Wenbo (author), Liu, Xinyu (author), Zhang, Kouchi (author)The optimization of mesa etch for a quasi-vertical gallium nitride (GaN) Schottky barrier diode (SBD) by inductively coupled plasma (ICP) etching was comprehensively investigated in this work, including selection of the etching mask, ICP power, radio frequency (RF) power, ratio of mixed gas, flow rate, and chamber pressure, etc. In particular...journal article 2020
- document
-
Sun, J. (author), Zhang, Shuo (author), Zhan, Teng (author), Liu, Zewen (author), Wang, Junxi (author), Yi, Xiaoyan (author), Li, Jinmin (author), Sarro, Pasqualina M (author), Zhang, Kouchi (author)A high responsivity and controllable recovery ultraviolet (UV) photodetector based on a tungsten oxide (WO<sub>3</sub>) gate AlGaN/GaN heterostructure with an integrated micro-heater is reported for the first time. The WO<sub>3</sub>nanolayer was deposited by physical vapor deposition (PVD) for deep UV absorption and the micro-heater was...journal article 2020
- document
-
Li, M. (author), Wang, Mian (author), Kang, Jichuan (author), Sun, Liping (author), Jin, Peng (author)Operation and maintenance (O&M) costs account for a large proportion of the total costs for offshore wind energy. Performing a reasonable maintenance strategy is an effective approach to reduce O&M costs and gain more profits. In this paper, an opportunistic maintenance strategy for offshore wind turbine systems considering...journal article 2020
- document
-
Li, Huajian (author), Sun, Deyi (author), Wang, Zhen (author), Huang, Fali (author), Yi, Zhonglai (author), Yang, Zhengxian (author), Zhang, Y. (author)Pumping is the most common technique used to transport fresh concrete in construction sites. The large-scale use of concrete all over the world makes the pumping increasingly important. A wide variety of additives and admixtures are incorporated into modern concrete in order for sustainable development. The performance of modern concrete is...journal article 2020
- document
-
Wang, K. (author), Li, Jiayuan (author), Huang, Lianzhong (author), Ma, Ranqi (author), Jiang, X. (author), Yuan, Yupeng (author), Mwero, Ngome A. (author), Negenborn, R.R. (author), Sun, Peiting (author), Yan, Xinping (author)Energy saving and emission reduction have attracted a great deal of attention in the maritime industry. The optimization of a ship's energy efficiency can reduce energy consumption and CO<sub>2</sub> emissions effectively. However, most of the available studies only focus on either the sailing speed or route optimization, and the interaction...journal article 2020
- document
-
Sun, C. (author), Li, Bijun (author), Li, Yicheng (author), Lu, Z. (author)To solve the problem that existing driving data cannot correlate to the large number of vehicles in terms of driving risks, is the functionality of intelligent driving algorithm should be improved. This paper deeply explores driving data to build a link between massive driving data and a large number of sample vehicles for driving risk...journal article 2019
- document
-
Chen, Z. (author), Wang, Li jun (author), Du, Xiao jia (author), Sun, Zai hong (author), Li, Fu shen (author), Chou, Kuo Chih (author)A commercial solid oxide fuel cell with a Ni/YSZ anode was characterized under a pure methane atmosphere. The amount of deposited carbon increased with an increase in temperature but decreased when the temperature exceeded 700°C. The reactivity of carbon decreased with increasing deposition temperature. Filamentous carbon was deposited from...journal article 2019
- document
-
Sun, X. (author), Wang, R. (author), Ould-Chikh, Samy (author), Osadchii, D. (author), Li, G. (author), Aguilar, Antonio (author), Hazemann, Jean louis (author), Kapteijn, F. (author), Gascon, Jorge (author)Mesoporous nitrogen-doped carbon nanoparticles with atomically dispersed iron sites (named mesoNC-Fe) are synthesized via high-temperature pyrolysis of an Fe containing ZIF-8 MOF. Hydrolysis of tetramethyl orthosilicate (TMOS) in the MOF framework prior to pyrolysis plays an essential role in maintaining a high surface area during the...journal article 2019
- document
-
Ge, W. (author), Jiao, Yutie (author), Sun, Heqiang (author), Li, Zongkun (author), Zhang, Hexiang (author), Zheng, Yan (author), Guo, Xinyan (author), Zhang, Zhaosheng (author), van Gelder, P.H.A.J.M. (author)Dam breach has catastrophic consequences for human lives and economy. In previous studies, empirical models are often, to a limited extent, due to the inadequacy of historical dam breach events. Physical models, which focus on simulating human behavior during floods, are not suitable for fast analysis of a large number of dams due to the...journal article 2019
- document
-
Dong, Xichao (author), Hu, Jiaqi (author), Hu, Cheng (author), Li, Y. (author), Sun, Shiyu (author)The sub-satellite track of geosynchronous synthetic aperture radar (GEO SAR) presents the figure "8" or "O", which causes the great changes of platform motion direction and the different projection of anisotropic irregularities along the line-of-sight (LOS) direction. Due to the almost equal angle velocity to that of Earth, the GEO SAR has...journal article 2019
- document
-
Li, Shengli (author), Liu, Y. (author), Zhang, H. (author), Cai, Hongming (author), Sun, Fenglian (author), Zhang, Kouchi (author)In this study, SAC305 and SAC305-0.3Ni solder balls were soldered onto Cu, high temperature treated Cu (H-Cu) and graphene coated Cu (G-Cu) substrates, respectively. The microstructure, the interfacial reaction, and the hardness of the solder joints were investigated. The interfacial intermetallic compound (IMC) is Cu<sub>6</sub>Sn<sub>5</sub...journal article 2018