Computationally Aware Surrogate Models for the Hydrodynamic Response Characterization of Floating Spar-Type Offshore Wind Turbine

Due to increasing environmental concerns and global energy demand, the development of Floating Offshore Wind Turbines (FOWTs) is on the rise. FOWTs offer a promising solution to expand wind farm deployment into deeper waters with abundant wind resources. However, their harsh operating conditions and lower maturity level compared to fixed...

Floating offshore wind turbine mooring line sections health status nowcasting: From supervised shallow to weakly supervised deep learning

The global installed capacity of floating offshore wind turbines is projected to increase by at least 100 times over the next decades. Station-keeping of floating offshore renewable energy devices is achieved through the use of mooring systems. Mooring systems are exposed to a variety of environmental and operational conditions that cause...

Multidisciplinary Design Analysis and Optimisation of Floating Offshore Wind Turbine Support Structures - Coupled Model Solution Strategies

Floating Offshore Wind Turbines (FOWT) can be installed at the sites of the most abundant wind resource. However, the design uncertainties and risks must be reduced to make them economically competitive. The design and optimisation methodologies for FOWT support structures adopted up to date tend to follow a sequential analysis strategy....

Opportunistic maintenance for offshore wind: A review and proposal of future framework

As new offshore wind development sites move further from shore and existing sites enter their post-subsidy operating period, it is expected that operational expenditure (OpEx) will increase. In order to overcome these challenges, a more flexible and cost-effective maintenance solution is needed. One such solution is opportunistic maintenance ...

Parametric Curve Comparison for Modeling Floating Offshore Wind Turbine Substructures

The drive for the cost reduction of floating offshore wind turbine (FOWT) systems to the levels of fixed bottom foundation turbine systems can be achieved with creative design and analysis techniques of the platform with free-form curves to save numerical simulation time and minimize the mass of steel (cost of steel) required for design. This...

A review and analysis of optimisation techniques applied to floating offshore wind platforms

The deployment of offshore wind in the UK has seen a rapid increase in the past decade and will continue to increase with the securement of the recent Scotwind sites. Floating platforms will be utilised for 60% of these new sites, creating opportunities to try new platform typologies and further solidify the validity of existing concepts....

Rigid body dynamic response of a floating offshore wind turbine to waves: Identification of the instantaneous centre of rotation through analytical and numerical analyses

Floating Offshore Wind Turbines (FOWT) can harness the abundant offshore wind resource at reduced installation requirements. However, a further decrease in the development risks through higher confidence in the design and analysis methods is needed. The dynamic behaviour of FOWT systems is complex due to the strong interactions between the...

A Review and Analysis of the Uncertainty Within Cost Models for Floating Offshore Wind Farms

The development and deployment of offshore wind farms in the last decade have seen a dramatic increase, now totalling 743 GW globally (Global Wind Energy Council, 2022). This rapid increase is expected to further continue now with the potential to explore deeper sites with the adoption of floating offshore platforms. Proof of this growth has...

A review of operations and maintenance modelling with considerations for novel wind turbine concepts

New wind turbine technologies and designs are being explored in order to reduce the cost of energy from offshore wind farms. Two potential routes to a lower cost of energy are the X- Rotor Concept (XRC) and Multi-Rotor System (MRS) turbines. A key cost saving for both Novel concepts included in this paper is operation and maintenance (O&M...

Parametrisation Scheme for Multidisciplinary Design Analysis and Optimisation of a Floating Offshore Wind Turbine Substructure - OC3 5MW Case Study

The development of novel energy technologies is considered imperative in the provision of solutions to meet an increasing global demand for clean energy. Floating Offshore Wind Turbine (FOWT) is one of the emerging technologies to exploit the vast wind resources available in deeper waters. To lower the levelized cost of energy (LCOE) or...

A Flexible, Multi-fidelity Levelised Cost of Energy Model for Floating Offshore Wind Turbines Multidisciplinary Design, Analysis and Optimisation Approaches

As the UK takes a step towards a greener, cleaner future aiming to be net zero by 2050, continuous development of the power network is required. A clear solution is offshore wind, having already proved its feasibility and success in nearshore sites. However, a large majority of near shore sites in the UK are already being utilised. The next...

Operation and Maintenance Modelling for Multi Rotor Systems: Bottlenecks in Operations

As the installed capacity of individual turbines increases, so do costs associated with manufacture and maintenance. One proposed solution to this problem is the Multi-Rotor System (MRS) which utilises many small rotors to yield the same energy capture as a single large turbine. The operational advantage of the MRS is the built in redundancy...

Multidisciplinary design analysis and optimization of floating offshore wind turbine substructures: A review

The development of novel energy technologies to meet net zero carbon emission is essential in the provision of solutions to realize an increasing worldwide demand for renewable energy. Floating Offshore Wind Turbine (FOWT) is one of the emerging technologies to exploit the vast wind resources available in deep waters within the offshore wind...

Development of a multi rotor floating offshore system based on vertical axis wind turbines

The upscaling of wind turbines results in fewer units per installed MW reducing infrastructure and maintenance costs of offshore wind farms. Multi rotor systems (MRS), comprising many wind turbine rotors on a single support structure, are potentially a means to maximize the upscaling benefit in achieving larger unit capacities than is...

Optimisation-based system designs for deep offshore wind farms including power to gas technologies

A large deployment of energy storage solutions will be required by the stochastic and non-controllable nature of most renewable energy sources when planning for higher penetration of renewable electricity into the energy mix. Various solutions have been suggested for dealing with medium- and long-term energy storage. Hydrogen and ammonia are...

Adaptations of Offshore Wind Operation and Maintenance Models for Floating Wind

This paper presents the key operations & maintenance (O&M) modelling inputs for fixed-bottom wind (FBW) and highlights the adaptations required for floating offshore wind (FOW) uses. The work also highlights major repair strategies such as tow to shore (T2S) and discusses the limitations and constraints which arise in an operational...

Digital twins of the mooring line tension for floating offshore wind turbines to improve monitoring, lifespan, and safety

The number of installed floating offshore wind turbines (FOWTs) has doubled since 2017, quadrupling the total installed capacity, and is expected to increase significantly over the next decade. Consequently, there is a growing consideration towards the main challenges for FOWT projects: monitoring the system’s integrity, extending the...