A novel bi-level distributed dynamic optimization method of ship fleets energy consumption

The optimization of ship energy consumption is attracting a great deal of attention, as societies seek to save energy and reduce emissions. Shipping companies are more concerned with the energy consumption of a ship fleet, as opposed to that of a single ship. Because the energy consumption of a fleet is influenced by multiple factors...

A novel method for joint optimization of the sailing route and speed considering multiple environmental factors for more energy efficient shipping

Energy saving and emission reduction have attracted a great deal of attention in the maritime industry. The optimization of a ship's energy efficiency can reduce energy consumption and CO₂ emissions effectively. However, most of the available studies only focus on either the sailing speed or route optimization, and the interaction...

Analysis on mechanical characteristics of welded joint with a new reinforced device in high-speed railway

High-speed railways adopt continuous welded rail to maintain the smoothness and continuity of the rail surface. However, the welded joint became one of the weakest parts. In order to clear the characteristics and mechanical properties of the new reinforced device, a dynamic three-dimensional vehicle-reinforced device-track coupling model is...

Experimental and numerical study on behaviour of square steel tube confined reinforced concrete stub columns after fire exposure

The behaviour of square steel tube confined reinforced concrete columns after fire exposure was studied experimentally and numerically in this paper. Eighteen stub columns were first heated following the ISO 834 standard fire including both heating and cooling phases, and were subsequently loaded to failure after cooling to ambient temperature....

Self-orienting hydrogel micro-buckets as novel cell carriers

Hydrogel microparticles are important in materials engineering, but their applications remain limited owing to the difficulties associated with their manipulation. Herein, we report the self-orientation of crescent-shaped hydrogel microparticles and elucidate its mechanism. Additionally, the microparticles were used, for the first time, as...

All-in-one improvement toward Li₆PS₅Br-Based solid electrolytes triggered by compositional tune

Sulfide solid electrolytes possess high ionic conductivity and moderate dendrite suppression capability, but rather poor compatibility against oxide cathodes and metallic Li. Here, we report O-doped Li₆PS₅Br as solid electrolyte synthesized by a facile solid-state sintering. Different from other O-incorporated sulfides,...

Synthesis and characterization of argyrodite solid electrolytes for all-solid-state Li-ion batteries

Li₆PS₅X (X = Cl, Br, I) argyrodites possess high ionic conductivity but with rather scattered values due to various processing conditions. In this work, Li₆PS₅X solid electrolytes were prepared by solid-state sintering or mechanical alloying and optimized with or without excess Li₂S....

Dynamic optimization of ship energy efficiency considering time-varying environmental factors

Nowadays, optimization of ship energy efficiency attracts increasing attention in order to meet the requirement for energy conservation and emission reduction. Ship operation energy efficiency is significantly influenced by environmental factors such as wind speed and direction, water speed and depth. Owing to inherent time-variety and...

Synthesis of severe lattice distorted MoS₂ coupled with hetero-bonds as anode for superior lithium-ion batteries

Exploration of advanced anode materials is a highly relevant research topic for next generation lithium-ion batteries. Here, we report severe lattice distorted MoS₂ nanosheets with a flower-like morphology prepared with PEG400 as additive, which acts not only as surfactant but importantly, also as reactant. Notably, in the absence...

Lithium halide coating as an effective intergrain engineering for garnet-type solid electrolytes avoiding high temperature sintering

Garnet-type Li₇La₃Zr₂O₁₂ solid electrolytes were commonly prepared by two steps solid-state reaction method, which undergoes high temperature over 1000 °C and thus inevitable for lithium volatilization and formation of secondary phases. Here, we propose a new intergrain architecture engineering of a...

Energy-efficient shipping: An application of big data analysis for optimizing engine speed of inland ships considering multiple environmental factors

Energy efficiency of inland ships is significantly influenced by navigational environment, including wind speed and direction as well as water depth and speed. The complexity of the inland navigational environment makes it rather difficult to determine the optimal speeds under different environmental conditions to achieve the best energy...

An integrated operational system to reduce O&M cost of offshore wind farms

Offshore wind is a relatively new industry and it is generally more expensive to generate electricity than many alternative renewable sources. Operation & Maintenance (O&M) makes up a significant part of the overall cost of running Offshore Wind Turbines (OWT). Since the O&M associated responsibility is shared among turbine...

Study on route division for ship energy efficiency optimization based on big environment data

In the case of the global energy crisis and the higher sound of energy saving and emission reduction, how to take effective management measures of ship energy efficiency to achieve the goal of energy saving and emission reduction, put forward a new challenge for the development of shipping technology. The application of big data technology...

Domain Wall Propagation through Spin Wave Emission

We theoretically study field-induced domain wall motion in an electrically insulating ferromagnet with hard- and easy-axis anisotropies. Domain walls can propagate along a dissipationless wire through spin wave emission locked into the known soliton velocity at low fields. In the presence of damping, the usual Walker rigid-body propagation mode...