- document
-
Wang, H. (author), Wang, L. Z. (author), Askarinejad, A. (author), Hong, Y. (author), He, B. (author)Piles have been widely used as foundations to resist lateral loads. For the design of a laterally loaded pile, one of the most important inputs is the ultimate soil resistance (p<sub>ult</sub> = K<sub>ult</sub>Dσv<sup>′,whereK</sup>ult is the ultimate lateral soil resistance coefficient, D is the pile diameter, and σv<sup>′</sup> is the...journal article 2023
- document
-
He, P. (author), Katan, A.J. (author), Tubiana, Luca (author), Dekker, C. (author), Michieletto, Davide (author)Kinetoplast DNA (kDNA) is a two-dimensional Olympic-ring-like network of mutually linked DNA minicircles found in certain parasites called trypanosomes. Understanding the self-assembly and replication of this structure are not only major open questions in biology but can also inform the design of synthetic topological materials. Here, we...journal article 2023
- document
-
El Jouhri, A. (author), El Sharkawy, A. (author), Paksoy, H. (author), Youssif, O.K.S.A. (author), He, X. (author), Kim, S. (author), Happee, R. (author)Introduction: SAE Level 3 is known as conditional driving automation. As long as certain conditions are met, there is no need to supervise the technology and the driver can engage in non-driving related tasks (NDRTs). However, a human driver must be present and alert to take over when the automation is facing its system limits. When such an...journal article 2023
- document
-
Gao, Z. (author), He, J. (author), Fritz, Martin (author), Shen, Y. (author), Zong, Z. (author), Spalink, Gerd (author), Alavi, S.M. (author), Staszewski, R.B. (author), Babaie, M. (author)This article introduces a low-jitter low-spur fractional-N phase-locked loop (PLL) adopting a new concept of a time-mode arithmetic unit (TAU) for phase error extraction. The TAU is a time-signal processor that calculates the weighted sum of input time offsets. It processes two inputs - the period of a digitally controlled oscillator (DCO)...journal article 2023
- document
-
He, Shutong (author), Qian, QK (author)In the built environment, improving the energy efficiency of existing building stock through retrofitting is the top pillar to mitigate climate change. Despite the efforts made by local authorities to provide technical and financial supports, the home energy retrofit rate remains low. This study aims to improve the understanding of how...journal article 2023
- document
-
He, Shutong (author), Qian, QK (author), de Vries, G. (author)In the built environment sector, enhancing energy efficiency through energy retrofitting is a key strategy to mitigate climate change. Despite the efforts made by local municipalities to offer technical and financial support, the rate of home energy retrofit remains low. The decision to undertake home energy retrofit is complex for homeowners....abstract 2023
- document
-
Yilmaz, A. (author), He, X. (author), Pletincx, Sven (author), Hauffman, Tom (author), Sietsma, J. (author), Gonzalez Garcia, Y. (author)The role of prior austenite grain size (PAGS) on the passive layer properties of martensitic steels is studied. Electron backscatter diffraction analysis shows that PAGS between 5 and 66 µm were obtained after applying different heat treatments. The barrier properties of passive film deteriorate with grain refinement up to 28 µm, attributed to...journal article 2022
- document
-
Li, Bo (author), Liu, Qiuhong (author), Wang, T. (author), He, He (author), Peng, You (author), Feng, Tao (author)Outdoor physical activities can promote public health and they are largely influenced by the built environment in different urban settings. Understanding the association between outdoor physical activities and the built environment is important for promoting a high quality of life. Existing studies typically focus on one type of outdoor activity...journal article 2022
- document
-
Chen, Y. (author), Chang, Z. (author), He, S. (author), Copuroglu, Oguzhan (author), Šavija, B. (author), Schlangen, E. (author)A good bond between the layers of 3D printed cementitious materials is a prerequisite for having high structural rigidity for the printed elements. However, the influence of printing process on an interlayer bond is still not well understood. This study investigates the influence of curing methods (i.e., air curing, plastic film covering, wet...journal article 2022
- document
-
He, J. (author), Suau, M. (author), Baier, Hendrik (author), Kaisers, Michael (author), Oliehoek, F.A. (author)How can we plan efficiently in a large and complex environment when the time budget is limited? Given the original simulator of the environment, which may be computationally very demanding, we propose to learn online an approximate but much faster simulator that improves over time. To plan reliably and efficiently while the approximate simulator...conference paper 2022
- document
-
Li, Bo (author), Wang, Yue (author), Wang, T. (author), He, Xiaoman (author), Kazak, Jan K. (author)With the advancement of urbanization, the stress on the green infrastructure around the urban agglomeration has intensified, which causes severe ecological problems. The uncertainty of urban growth makes it difficult to achieve effective protection only by setting protection red lines and other rigid measures. It is of practical significance to...journal article 2022
- document
-
Suau, M. (author), He, J. (author), Spaan, M.T.J. (author), Oliehoek, F.A. (author)Learning effective policies for real-world problems is still an open challenge for the field of reinforcement learning (RL). The main limitation being the amount of data needed and the pace at which that data can be obtained. In this paper, we study how to build lightweight simulators of complicated systems that can run sufficiently fast for...conference paper 2022
- document
-
Research Progress on Convective Heat Transfer Characteristics of Supercritical Fluids in Curved TubeLiu, Xinxin (author), Li, Shuoshuo (author), Liu, Liang (author), He, Chao (author), Sun, Zhuang (author), Özdemir, F. (author), Aziz, Muhammad (author), Kuo, Po-Chih (author)Because of their compact structure, ease of processing and higher heat transfer coefficient, curved-tube heat exchangers are widely applied in various industry applications, such as nuclear power systems, solar-powered engineering, aircraft engine cooling systems and refrigeration and cryogenic systems. Accurate knowledge about the heat transfer...journal article 2022
- document
-
Yang, W. (author), He, Renke (author), Chen, Tingshu (author), Goossens, R.H.M. (author), Huysmans, T. (author)Analysing the contact area between head-related products and the corresponding craniofacial profile is necessary to make such products more comfortable. The study of soft tissue biomechanical experiments provides a reliable perspective for understanding such contact areas and improving the comfort. In order to obtain more accurate and visualized...journal article 2022
- document
-
Suau, M. (author), He, J. (author), Çelikok, Mustafa Mert (author), Spaan, M.T.J. (author), Oliehoek, F.A. (author)Due to its high sample complexity, simulation is, as of today, critical for the successful application of reinforcement learning. Many real-world problems, however, exhibit overly complex dynamics, which makes their full-scale simulation computationally slow. In this paper, we show how to factorize large networked systems of many agents into...conference paper 2022
- document
-
Feng, W. (author), He, P. (author), Koetsier, M. (author), Pavlovic, M. (author)Wrapped composite joint is an innovative technique which connects steel hollow sections through bonding such that the fatigue performance is improved compared to welded joint. In this paper, a DIC-based method of monitoring surface strains is proposed to quantify the debonding crack propagation within the composite wrap layers during high cycle...conference paper 2022
- document
-
Hou, L. G. (author), Yu, H. (author), Wang, Y. W. (author), You, L. (author), He, Z. B. (author), Wu, C. M. (author), Eskin, D. G. (author), Katgerman, L. (author), Zhuang, L. Z. (author), Zhang, J. S. (author)The retrogression and re-aging (RRA) processes, aimed mainly at tailoring intergranular precipitates, could significantly improve the corrosion resistance (i.e., stress corrosion cracking resistance) without considerably decreasing the strength, which signifies that an efficient control of the size, distribution and evolution of intergranular...journal article 2022
- document
-
Goel, Avishek (author), Mohammadzadeh Moghaddam, E. (author), Liu, Wen (author), He, Chao (author), Konttinen, Jukka (author)Biomass chemical looping gasification (BCLG) offers significant advantages over the conventional biomass gasification process in terms of enhanced gasification efficiency, inherent CO<sub>2</sub> capture, process circularity, and mitigated emissions of pollutants. This review discusses the prevailing status of research and development of BCLG...review 2022
- document
-
Liang, M. (author), Chang, Z. (author), He, S. (author), Chen, Y. (author), Gan, Y. (author), Schlangen, E. (author), Šavija, B. (author)Early-age stress (EAS) is an important index for evaluating the early-age cracking risk of concrete. This paper encompasses a thermo-chemo-mechanical (TCM) model and active ensemble learning (AEL) for predicting the EAS evolution. The TCM model provides the data for the AEL model. First, based on Fourier's law, Arrhenius’ equation, and rate...journal article 2022
- document
-
Hu, Z. (author), Lian, S. (author), Zitman, T.J. (author), Wang, H. (author), He, Z. (author), Wei, H. (author), Ren, L. (author), Uijttewaal, W.S.J. (author), Suzuki, T. (author)Wave height attenuation in vegetation canopies is often all attributed to the drag force exerted by vegetation, whereas other potential dissipation process is often neglected. Previous studies without vegetation have found that opposing currents can induce wave breaking and greatly increase dissipation. It is not clear if similar process may...journal article 2022