Searched for: +
(61 - 80 of 136)

Pages

document
He, Xiaoxi (author), Cheng, Haibo (author), Xie, Jiahong (author), Wang, Ping (author), Liang, K. (author)
Passwords have been widely used in online authentication, and they form the front line that protects our data security and privacy. But the security of password may be easily harmed by insecure password generator. Massive reports state that users are always keen to generate new passwords by reusing or fine-tuning old secrets. Once an old...
conference paper 2022
document
Hendriks, H.C.M. (author), van Prooijen, Bram (author), Cheng, C. H. (author), Aarninkhof, S.G.J. (author), Winterwerp, J.C. (author), Soetaert, K. E. (author)
The amount of suspended fines in the southern North Sea strongly depends on their exchange with the sandy seabed. This exchange is governed by resuspension of fines during storms, followed by burial in the week thereafter. Despite its importance for fine sediment dynamics, the burial of fines into a sandy seabed is currently not well...
journal article 2022
document
Xu, Shichang (author), Cheng, Gang (author), Pang, Y. (author), Jin, Zujin (author), Kang, Bin (author)
Real-time and accurate longitudinal rip detection of a conveyor belt is crucial for the safety and efficiency of an industrial haulage system. However, the existing longitudinal detection methods possess drawbacks, often resulting in false alarms caused by tiny scratches on the belt surface. A method of identifying the longitudinal rip through...
journal article 2021
document
Cheng, L. (author), Xin, H. (author), Groves, R.M. (author), Veljkovic, M. (author)
Acoustic emission (AE) is often used for structural health monitoring (SHM) in the wide field of engineering structures and one of its most beneficial attributes is the ability to localize the damage/crack based on the AE events. The vast majority of ongoing work on AE monitoring focues on geometrically simple structures or a confined area,...
journal article 2021
document
Cheng, Xiaoyang (author), Diambra, Andrea (author), Ibraim, Erdin (author), Liu, H. (author), Pisano, F. (author)
Based on advanced 3D finite element modelling, this paper analyses the stress paths experienced by soil elements in the vicinity of a monopile foundation for offshore wind turbines subjected to cyclic loading with the aim of informing soil laboratory testing in support of monopile foundation design. It is shown that the soil elements in front of...
journal article 2021
document
Liu, Qingzhi (author), Cheng, Long (author), Alves, R.C.A. (author), Alves, Renan (author), Ozcelebi, Tanir (author), Kuipers, F.A. (author), Xu, Guixian (author), Lukkien, Johan (author), Chen, Shanzhi (author)
Software-defined networking (SDN) is a cornerstone of next-generation networks and has already led to numerous advantages for data-center networks and wide-area networks. However, SDN is not widely adopted in constrained networks, such as Wireless Sensor Networks (WSN), due to excessive control overhead, lossy medium, and in-band control...
journal article 2021
document
Cheng, Long (author), Wang, Ying (author), Liu, Qingzhi (author), Epema, D.H.J. (author), Liu, Cheng (author), Mao, Ying (author), Murphy, John (author)
Large data centers are currently the mainstream infrastructures for big data processing. As one of the most fundamental tasks in these environments, the efficient execution of distributed data operators (e.g., join and aggregation) are still challenging current data systems, and one of the key performance issues is network communication time....
journal article 2021
document
Xin, H. (author), Tarus, I.A. (author), Cheng, L. (author), Veljkovic, M. (author), Persem, Nicolas (author), Lorich, Laurent (author)
In recent years, wire arc additive manufacturing (WAAM) has increasingly attracted attention in the construction sector because of its ability to optimize the production of large metallic structural parts, and for use in connections suitable for easy execution and potential reuse. The technology has become mature leading to shorter fabrication...
journal article 2021
document
Jin, Zujin (author), Cheng, Gang (author), Pang, Y. (author), Xu, Shichang (author), Yuan, Dunpeng (author)
During the processing of an optical mirror, the performance parameters of the bottom support system would affect the surface forming accuracy of the mirror. The traditional bottom support system has a large unadjustable support stiffness, which increases the difficulty of unloading the impact force generated by the grinding disc. In response to...
journal article 2021
document
Balasubramani, Vinoth (author), Kujawińska, Małgorzata (author), Allier, Cédric (author), Anand, Vijayakumar (author), Cheng, Chau Jern (author), Depeursinge, Christian (author), Hai, Nathaniel (author), Kalkman, J. (author), Park, Yong Keun (author)
Quantitative Phase Imaging (QPI) provides unique means for the imaging of biological or technical microstructures, merging beneficial features identified with microscopy, interferometry, holography, and numerical computations. This roadmap article reviews several digital holography-based QPI approaches developed by prominent research groups....
review 2021
document
Li, Wenting (author), Cheng, Haibo (author), Wang, Ping (author), Liang, K. (author)
Multi-factor authentication (MFA) has been widely used to safeguard high-value assets. Unlike single-factor authentication (e.g., password-only login), t-factor authentication (tFA) requires a user always to carry and present t specified factors so as to strengthen the security of login. Nevertheless, this may restrict user experience in...
journal article 2021
document
Anarde, Katherine (author), Cheng, Wei (author), Tissier, M.F.S. (author), Figlus, Jens (author), Horrillo, Juan (author)
Meteotsunami waves can be triggered by atmospheric disturbances accompanying tropical cyclone rainbands (TCRs) before, during, and long after a tropical cyclone (TC) makes landfall. Due to a paucity of high-resolution field data along open coasts during TCs, relatively little is known about the atmospheric forcing that generate and resonantly...
journal article 2021
document
Hu, R. (author), Ferrari, Riccardo M.G. (author), Chen, Z. (author), Cheng, Yuqiang (author), Zhu, Xiaobin (author), Cui, Xing (author), Wu, Jianjun (author)
This paper proposes a controller design for the electric pump of a deep-throttling rocket engine. The nonlinearity of the system is taken into consideration by analyzing the gap metric. Then, proportional-integral-derivative controller and gain-scheduling linear quadratic regulator are designed. Analyzing the amplitude- and phase-frequency...
journal article 2021
document
Li, X. (author), Cheng, Ai Jie (author), Lin, H.X. (author)
We present an approach which combines the sample regenerating particle filter (SRGPF) and unequal weight ensemble Kalman filter (UwEnKF) to obtain a more accurate forecast for nonlinear dynamic systems. Ensemble Kalman filter assumes that the model errors and observation errors are Gaussian distributed. Particle filter has demonstrated its...
journal article 2021
document
Cheng, L. (author), Xin, H. (author), Veljkovic, M. (author)
Acoustic Emission (AE) is used in various fields of engineering and recently has been gained increasing attention in crack detection of cyclically loaded engineering structures. The crack location strategies are rather complicated for realistic structures with complex geometry. In this paper, pencil leads breaking (PLB) experiments and finite...
journal article 2020
document
Xue, S. (author), Schrijer, F.F.J. (author), van Oudheusden, B.W. (author), Wang, Chengpeng (author), Shi, Zhiwei (author), Cheng, Keming (author)
In this paper the configurations of shock wave-boundary layer interactions (SWBLI) are studied theoretically and experimentally in Mach number 2 and 2.5 flows on test models with various wedge angles ranging from to. The proposed theoretical method couples the free interaction theory (FIT) with the minimum entropy production (MEP) principle...
journal article 2020
document
Cheng, L. (author), Xin, H. (author), Groves, R.M. (author), Veljkovic, M. (author)
S460 steel is increasingly used in civil engineering, especially in a harsh environment such as offshore structures [1]. Material damage is inevitable for structures subjected to static and dynamic loads during their technical life time. Thus, monitoring material damage is important for providing information regarding critical damage of in...
abstract 2020
document
Cheng, Yiwei (author), Arora, Bhavna (author), Şengör, S. Sevinç (author), Druhan, Jennifer L. (author), Wanner, Christoph (author), van Breukelen, B.M. (author), Steefel, Carl I. (author)
Microbially mediated sulfate reduction is a ubiquitous process in many subsurface systems. Isotopic fractionation is characteristic of this anaerobic process, since sulfate-reducing bacteria (SRB) favor the reduction of the lighter sulfate isotopologue (S<sup>32</sup>O<sub>4</sub><sup>2−</sup>) over the heavier isotopologue (S<sup>34</sup>O...
journal article 2020
document
Cheng, Peiyao (author), Mugge, R. (author), de Bont, Cees J.P.M. (author)
Designers are frequently involved in embodying product innovations. It is challenging to embody really new products (RNPs) because<br/>consumers often have difficulty comprehending them. This study explores the value of visual complexity for designing RNPs. In study 1, an experiment was conducted (n = 77) to test the effects of visual complexity...
journal article 2020
document
Couvreux, Fleur (author), Bazile, Eric (author), Rodier, Quentin (author), Maronga, Björn (author), Matheou, Georgios (author), Chinita, Maria J. (author), Edwards, John (author), van Stratum, Bart J.H. (author), van Heerwaarden, Chiel C. (author), Huang, Jing (author), Moene, Arnold F. (author), Cheng, Anning (author), Fuka, Vladimir (author), Basu, S. (author), Bou-Zeid, Elie (author), Canut, Guylaine (author), Vignon, Etienne (author)
In polar regions, where the boundary layer is often stably stratified, atmospheric models produce large biases depending on the boundary-layer parametrizations and the parametrization of the exchange of energy at the surface. This model intercomparison focuses on the very stable stratification encountered over the Antarctic Plateau in 2009. Here...
journal article 2020
Searched for: +
(61 - 80 of 136)

Pages