Searched for: +
(41 - 60 of 555)

Pages

document
Du, T. (author), Turrin, M. (author), Jansen, S.C. (author), van den Dobbelsteen, A.A.J.F. (author), De Luca, Francesco (author)
Architectural space layout has proven to be influential on building energy performance. However, the relationship between different space layouts and their consequent energy demands has not yet been systematically studied. This study thoroughly investigates such a relationship. In order to do so, a computational method was developed, which...
journal article 2022
document
Jansen, K.M.B. (author), Teunissen, L.P.J. (author)
Cooling vests containing phase change materials (PCMs) are used to reduce heat stress in hot environments and maintain the body core temperature within a safe range. The performance of such cooling vests depends in a complicated way on the PCM material and mass, the insulation value of the clothing layers and heat loss to the environment....
journal article 2022
document
Jansen, A.J. (author), van Vlaardingen, A. (author), Choppin, S.B. (author), Hart, J (author), Litzenberger, S. (author), Schwanitz, S. (author), de Zee, M. (author), Madeleine, P. (author)
conference paper 2022
document
Meijers, M. C. (author), Stouthard, J. (author), Evers, A.W.M. (author), Das, E. (author), Drooger, H. J. (author), Jansen, S. J.A.J. (author), Francke, A. L. (author), Plum, N. (author), van Vliet, L. M. (author)
To alleviate anti-cancer treatment burden in advanced breast cancer, patient-clinician communication strategies based on nocebo-effect mechanisms are promising. We assessed distinct/combined effects on psychological outcomes (e.g. anxiety; main outcome) and side-effect expectations of (1) nocebo information about the (non)pharmacological origin...
journal article 2022
document
Jansen, A.J. (author)
poster 2022
document
Buso, A. (author), McQuillan, H.L. (author), Jansen, K.M.B. (author), Karana, E. (author)
Designers of textile-based interactive systems tend to treat woven fabrics as static materials and lack deeper understandings of how the textile can be designed for responsive behaviours in artefacts. As a result, in most studies across design and HCI, textiles are employed as substrates for computational, biological, or smart materials. This...
conference paper 2022
document
Jansen, B. (author), van Stijn, A. (author), Gruis, V.H. (author), van Bortel, G.A. (author)
The built environment can be made more circular by gradually replacing building components with more circular components during construction, renovation, or maintenance. However, many different design options can be seen as circular. Although there is a growing number of studies about circular design options, research on what makes these options...
journal article 2022
document
Jansen, Marc (author), Fanchamps, L.J.A. (author), Milrad, Marcelo (author), Specht, M.M. (author), Hamidi, Ali (author)
One major challenge the educational community is facing relates to how to effectively integrate computational thinking (CT) concepts and ideas into a particular school curriculum. Acquiring CT-skills by means of STEM offers rich opportunities within students´ education which may lead to learning gains. Previous research has shown that, to...
conference paper 2022
document
McKenna, Russell (author), Pfenninger, Stefan (author), Heinrichs, Heidi (author), Schmidt, Johannes (author), Staffell, Iain (author), Bauer, Christian (author), Gruber, Katharina (author), Hahmann, Andrea N. (author), Jansen, Malte (author), Klingler, Michael (author), Landwehr, Natascha (author), Larsén, Xiaoli Guo (author), Lilliestam, Johan (author), Pickering, Bryn (author), Robinius, Martin (author), Tröndle, Tim (author), Turkovska, Olga (author), Wehrle, Sebastian (author), Weinand, Jann Michael (author), Wohland, Jan (author)
The rapid uptake of renewable energy technologies in recent decades has increased the demand of energy researchers, policymakers and energy planners for reliable data on the spatial distribution of their costs and potentials. For onshore wind energy this has resulted in an active research field devoted to analysing these resources for regions...
review 2022
document
Shokrollahzadeh Behbahani, S. (author), Hajibeygi, H. (author), Voskov, D.V. (author), Jansen, J.D. (author)
A smoothed embedded finite-volume modeling (sEFVM) method is presented for faulted and fractured heterogeneous poroelastic media. The method casts a fully coupled strategy to treat the coupling between fault slip mechanics, deformation mechanics, and fluid flow equations. This ensures the stability and consistency of the simulation results,...
journal article 2022
document
Novikov, A. (author), Voskov, D.V. (author), Khait, M. (author), Hajibeygi, H. (author), Jansen, J.D. (author)
We present a scalable collocated Finite Volume Method (FVM) to simulate induced seismicity as a result of pore pressure changes. A discrete system is obtained based on a fully-implicit fully-coupled description of flow, elastic deformation, and contact mechanics at fault surfaces on a flexible unstructured mesh. The cell-centered collocated...
journal article 2022
document
Teunissen, L.P.J. (author), Jansen, K.M.B. (author), Janssen, E.S. (author), Kingma, Boris R.M. (author), De Korte, Johannus Q. (author), Eijsvogels, Thijs M.H. (author)
Objectives To evaluate how separate and combined climatic parameters affect peak core temperature during exercise in the heat using computer simulations fed with individual data. Methods The impact of eight environmental conditions on rectal temperature (T re) was determined for exercise under heat stress using the Fiala-thermal-Physiology...
journal article 2022
document
Steijlen, A.S.M. (author), Jansen, K.M.B. (author), Bastemeijer, J. (author), French, P.J. (author), Bossche, A. (author)
Sweat sensors allow for new unobtrusive ways to continuously monitor an athlete's performance and health status. Significant advances have been made in the optimization of sensitivity, selectivity, and durability of electrochemical sweat sensors. However, comparing the in situ performance of these sensors in detail remains challenging because...
journal article 2022
document
Bozali, B. (author), Ghodrat, S. (author), Plaude, L. (author), van Dam, J.J.F. (author), Jansen, K.M.B. (author)
In recent years, knitted strain sensors have been developed that aim to achieve reliable sensing and high wearability, but they are associated with difficulties due to high hysteresis and low gauge factor (GF) values. This study investigated the electromechanical performance of the weft-knitted strain sensors with a systematic approach to...
journal article 2022
document
Roelofsen, C.P.G. (author), Jansen, K.M.B. (author)
In this study, using construction activities as an example, a proposal is made for the time-dependent prediction of the thermal sensation and the performance loss using a cooling vest, under transient conditions. The approach presented here can, mutatis mutandis, be used for any work activity and the use of a cooling vest, whether or not in a...
journal article 2022
document
Yang, Q. (author), Simão, T. D. (author), Jansen, Nils (author), Tindemans, Simon H. (author), Spaan, M.T.J. (author)
Safety is critical to broadening the a lication of reinforcement learning (RL). Often, RL agents are trained in a controlled environment, such as a laboratory, before being de loyed in the real world. However, the target reward might be unknown rior to de loyment. Reward-free RL addresses this roblem by training an agent without the reward to...
conference paper 2022
document
Jansen, Femke A. (author), Uijlenhoet, R. (author), Jacobs, Cor M.J. (author), Teuling, Adriaan J. (author)
We study the controls on open water evaporation of a large lowland reservoir in the Netherlands. To this end, we analyse the dynamics of open water evaporation at two locations, Stavoren and Trintelhaven, at the border of Lake IJssel (1100ĝ€¯km2); eddy covariance systems were installed at these locations during the summer seasons of 2019 and...
journal article 2022
document
van Stijn, A. (author), Eberhardt, L. C.M. (author), Jansen, B. (author), Meijer, A. (author)
The transition towards a Circular Economy (CE) in the built environment is vital to reduce environmental impacts, resource consumption and waste generation. The built environment can be made circular by replacing building components with more circular ones. There are many circular design options for building components and knowledge about...
journal article 2022
document
Liu, Q. (author), Ghodrat, S. (author), Jansen, K.M.B. (author)
Shape memory alloy (SMA) wires are excellent candidates for wearable actuators since they are thin, low weight and have a high actuation force. The main drawbacks are that the wire should be kept straight and needs to be relatively long to enable a large enough actuation stroke. Embedding the SMA wire in a flexible tube largely enhances its...
journal article 2022
document
Jansen, B. (author), van Stijn, A. (author), Eberhardt, Leonora Charlotte Malabi (author), van Bortel, G.A. (author), Gruis, V.H. (author)
The construction sector can become more sustainable by applying the Circular Economy concept, which distinguishes two main pathways: substituting materials for biological materials, or optimizing the use or reuse of technical materials. Practitioners sometimes choose one pathway over the other, but knowledge of which of these pathways yields...
journal article 2022
Searched for: +
(41 - 60 of 555)

Pages