- document
-
Schra, L. (author), Kolkman, H.J. (author)The SCC resistances of three damage tolerant aluminium sheet materials were determined by means of the ASCOR (Automated Stress COrrosion Ring) test. The conventional damage tolerant sheet material 2024-T3 was used as reference. The SCC resistance of 8090-T81 turned out to be only slightly lower than the SCC resistance of 2024-T3. In contrast,...report 1991
- document
-
Schra, L. (author), 't Hart, W.G.J. (author), Boogers, J.A.M. (author)Outdoor corrosion and stress corrosion tests were conducted on Al-Li plate and sheet materials for 3 and almost 5 years respectively. The results can be summarized as follows: Corrosion: Peak aged XXXA-T651 (8090-T651) exhibited greater exfoliation corrosion resistance than 2024-T351 and 2324-T39 plate. 2091-T3 and 2024-T3 sheet were found to be...report 1990
- document
-
Schra, L. (author), 't Hart, W.G.J. (author)Long-term outdoor exposure tests were done to investigate the effect of cooling rate on corrosion and stress corrosion properties of extruded rods of the high strength aluminium alloys 2024-T4, 2023-T6, 7075-T6 and 7075-T73. The 2024 alloy exhibited a high susceptibility to SCC irrespective of best treatment and cooling rate, whereas 7075-T6 was...report 1990
- document
-
Schra, L. (author), van Leeuwen, H.P. (author), Meulman, A.E. (author)The fatigue crack propagation performance of the alloy AZ 74.61 under manoeuvre spectrum loading was studied. The crack propagation behaviour was also compared with that of the American forging alloy AA 7050, not only for simulated manoeuvre loading but also for simulated gust loading and programme loading. It was found that, at comparable...report 1976