Searched for: +
(21 - 40 of 74)

Pages

document
Qiang, Rui (author), Wu, Y. (author), Soeiro, Thiago Batista (author), Granello, P. (author), Qin, Z. (author), Bauer, P. (author)
This paper proposes a solution to the circuit topology of heavy-duty electric vehicle (HDEV) chargers. In light of the original hybrid rectifier, a new unidirectional Input-Parallel-Output-Series (IPOS) three-phase hybrid rectifier is proposed and analyzed. The IPOS topology is advantageous at ultra-high power rating to interface the next...
conference paper 2022
document
Yu, G. (author), Soeiro, Thiago B. (author), Dong, J. (author), Bauer, P. (author)
This paper presents the semiconductor losses analytical equations in closed form for two-level voltage source converter, three-level neutral point clamped (NPC) and three-level T-Type PFC topologies in high power applications. The reverse parallel current conduction between the SiC MOSFETs channel and body diode is considered. A circuit...
conference paper 2022
document
Stecca, M. (author), Vermeer, W.W.M. (author), Soeiro, Thiago B. (author), Ramirez Elizondo, L.M. (author), Bauer, P. (author), Palensky, P. (author)
This paper discusses the design and optimization of electric vehicles’ fast-charging stations with on-site photovoltaic energy production and a battery energy storage system. Three scenarios, varying the number of chargers, distance from the main grid, and on-site photovoltaic generation potential, are investigated. Such scenarios are...
conference paper 2022
document
Argiolas, Luca (author), Stecca, M. (author), Ramirez Elizondo, L.M. (author), Soeiro, Thiago B. (author), Bauer, P. (author)
Battery Energy Storage Systems typically procure their primary revenues from regulated energy and ancillary services markets; nonetheless, they have great potential in supporting distribution network operators and their users. This paper evaluates the potential business case of battery storage systems integrating market application and services...
journal article 2022
document
Grazian, F. (author), Soeiro, Thiago B. (author), Bauer, P. (author)
Wireless charging must be highly efficient throughout the entire battery charging profile to compete in the electric vehicle (EV) industry. Thus, optimum load matching is commonly used: it operates at the equivalent load that maximizes the efficiency, which depends on the coil's alignment. In this article, the optimum load is made independent...
journal article 2022
document
Yu, G. (author), Dong, J. (author), Soeiro, Thiago B. (author), Zhu, G. (author), Yao, Y. (author), Bauer, P. (author)
This article introduces a three-mode variable-frequency zero-voltage switching (ZVS) modulation method for the four-switch buck+boost converter. This method makes this circuit concept well suited for applications, such as wireless power charging of electric vehicles, where this circuit operates as a power buffer between the resonant converter...
journal article 2022
document
Zhu, G. (author), Dong, J. (author), Shi, W. (author), Soeiro, Thiago B. (author), Xu, J. (author), Bauer, P. (author)
This article proposes a mode-switching-based phase shift control (MS-PSC) for wireless power transfer (WPT) systems, which is able to achieve power regulation, load matching, and wide ZVS operations simultaneously without using additional dc-dc converters. Based on the mode transitions between the full-bridge, mixed-bridge, and half-bridge...
journal article 2022
document
Xu, J. (author), Soeiro, Thiago B. (author), Wu, Y. (author), Gao, Fei (author), Wang, Y. (author), Tang, Houjun (author), Bauer, P. (author)
A three-phase buck-type rectifier features a step-down ac-dc conversion function, which is considered as a prominent solution for electric vehicle chargers and telecommunication systems integrated to the grid above 380 V line to line. However, traditional solutions for those applications employ cascaded architectures with an ac-dc boost-type...
journal article 2022
document
Shi, W. (author), Dong, J. (author), Soeiro, Thiago B. (author), Riekerk, C. (author), Grazian, F. (author), Yu, G. (author), Bauer, P. (author)
Due to the urgent desire for a fast, convenient, and efficient battery charging technology for electric vehicle (EV) users, extensive research has been conducted into the design of high-power inductive power transfer (IPT) systems. However, there are few studies that formulate the design as a multiobjective optimization (MOO) research...
journal article 2022
document
Xu, J. (author), Soeiro, Thiago B. (author), Wang, Yong (author), Gao, Fei (author), Tang, Houjun (author), Bauer, P. (author)
Two-stage AC-DC converters are considered as a prominent solution for DC-type electric vehicle (EV) chargers. However, this kind of architecture suffers from high switching losses with large heatsink and DC-link capacitor volume. To relieve this issue, this paper presents a new hybrid modulation for DC-type EV chargers, where a two-phase...
journal article 2022
document
Stecca, M. (author), Tan, Changyu (author), Xu, J. (author), Soeiro, Thiago B. (author), Bauer, P. (author), Palensky, P. (author)
In this article, a hybrid Si/Si carbide (SiC) switch (HyS) modulation with minimum SiC MOSFET conduction (mcHyS) is experimentally characterized, so as to derive its conduction and switching performance. These are later used to derive a silicon (Si) area analytical model for the HyS configuration. The chip area model is used to benchmark the...
journal article 2022
document
Grazian, F. (author), Shi, W. (author), Soeiro, Thiago B. (author), Dong, J. (author), Bauer, P. (author)
When considering EV wireless charging that uses inductive power transfer with magnetic resonance, the coils’ current distortion must be minimized to guarantee compliance with the electromagnetic compatibility limits on the radiated magnetic field set by the relevant industrial standards. This paper analyzes the current distortion caused by...
conference paper 2022
document
Grazian, F. (author), Soeiro, Thiago B. (author), Bauer, P. (author)
Nowadays, inductive power transfer (IPT) with magnetic resonance is the most used method for high-power wireless battery charging applications. Once the topology of the compensation network and the operating frequency are selected, there are infinite combinations of the circuit equivalent inductance and compensation capacitance values resonating...
conference paper 2022
document
Grazian, F. (author), Soeiro, Thiago B. (author), Bauer, P. (author)
This paper investigates the interoperability of the proposed voltage/current doubler (V/I-D) converter used for wireless charging of electric vehicles (EVs), which achieves high efficiency when charging both 400V and 800V batteries at the same power. Nominally, the V/I-D converter employs bipolar pads (BPP) at both the primary and the secondary...
conference paper 2022
document
Sun, Jian (author), Wu, Y. (author), Soeiro, Thiago B. (author), Qin, Z. (author), Bauer, P. (author)
An efficient, compact and lightweight three-phase AC-DC power factor correction (PFC) converter becomes a necessity for electric vehicles (EVs) On-board chargers (OBCs) in conventional grid-to-vehicle (G2V) and vehicle-to-grid (V2G) charging methods. The commercially available OBCs have very limited power density despite the moderate efficiency...
conference paper 2022
document
Shekhar, A. (author), Soeiro, Thiago B. (author), Wu, Y. (author), Bauer, P. (author)
DC links with back to back voltage source converters are usually built alongside the existing medium voltage ac distribution grids for infrastructure reinforcement. The distribution network operators need to run multiple of such parallel ac and dc links between two substations at optimal efficiency. This article shows that the active power...
journal article 2021
document
Stecca, M. (author), Soeiro, Thiago B. (author), Ramirez Elizondo, L.M. (author), Bauer, P. (author), Palensky, P. (author)
Battery Energy Storage Systems (BESSs) are a new asset for Primary Frequency Regulation (PFR), an ancillary service for improving the grid stability. The system operators determine the implementation and remuneration of PFR. However, assessing the revenue stream is not enough to define the business case, as also the components’ lifetime has to...
journal article 2021
document
Wu, Y. (author), Soeiro, Thiago B. (author), Shekhar, A. (author), Xu, J. (author), Bauer, P. (author)
LCL filter is widely adopted for strict standard compliance of grid-tied voltage source converters (VSCs). The third order low-pass filtering provides great attenuation for the high frequency harmonics generated by the power electronics guaranteeing low output currents noise injection into the grid. A major concern of the implementation of the...
conference paper 2021
document
Xu, J. (author), Soeiro, Thiago B. (author), Gao, Fei (author), Tang, Houjun (author), Bauer, P. (author)
Three-legs active power decoupling (APD) converters are widely studied in the single-phase grid-connected systems to enhance the circuit lifetime by creating an alternative path for the typical existing dc-side power pulsating ripple. Therefore, this reduces the requirement of smoothing dc capacitors allowing compact designs even with the...
journal article 2021
document
Ganeshpure, D.A. (author), Castro Heredia, L.C. (author), Ghaffarian Niasar, M. (author), Vaessen, P.T.M. (author), Soeiro, Thiago B. (author), Bauer, P. (author)
This paper presents a comparison in Partial Discharge (PD) behaviour when an air corona setup is subjected to different waveforms, namely an idealized 50 Hz sinusoidal and staircase-based sinusoidal waveforms near inception voltage and at a higher voltage. In this study, it has been observed that the PD repetition rate and the Phase-Resolved PD ...
conference paper 2021
Searched for: +
(21 - 40 of 74)

Pages