Combining asynchronous microphone array measurements for enhanced acoustic imaging and volumetric source mapping

This paper explores the advantages of combining asynchronous microphone array measurements for acoustic source mapping in two and three–dimensional applications. Four different approaches are considered, three consisting of the combination of the source maps (arithmetic mean, geometric mean, and minimum value), and a fourth one obtained by...

Aeroacoustic design and characterization of the 3D-printed, open-jet, anechoic wind tunnel of Delft University of Technology

The newly refurbished vertical tunnel (V-tunnel) at Delft University of Technology has been redesigned as a state-of-the-art facility for research in aeroacoustics (A-tunnel), as well as fundamental studies in laminar-turbulent transition and flow control. This manuscript focuses on the design and refurbishment aspects of the facility,...

Assessment of the accuracy of microphone array methods for aeroacoustic measurements

In this paper, the performance of four acoustic imaging methods: conventional frequency domain beamforming (CFDBF), functional beamforming (FUNBF), enhanced high resolution CLEAN–SC (EHR–CLEAN–SC) and generalized inverse beamforming (GIBF), is investigated in terms of accuracy and variability. Three experimental test cases are considered: 1)...

Comparison of cavity geometries for a microphone array in an open-jet wind-tunnel experiment

This paper analyses the influence of microphone cavity geometry on beamforming measurements with a turbulent boundary layer present on the microphone array. A 16- microphone array was tested in the anechoic open-jet wind tunnel of the Delft University of Technology. The array was placed on a flat plate mounted flush with the exit nozzle of the...

Experimental characterization of the turbulent boundary layer over a porous trailing edge for noise abatement

The hydrodynamic and acoustic fields for a NACA 0018 with solid and porous trailing edge inserts are investigated. The porous inserts, covering 20% of the chord, are manufactured with metal foams with cell diameters of 450 and 800 μm and permeability values of 6 × 10−10 and 2.7 × 10−9 m2. The experiments are performed at a chord-based Reynolds...

Alleviation of Propeller-slipstream-induced unsteady pylon loading by a flow-permeable leading edge

The impingement of a propeller slipstream on a downstream surface causes unsteady loading, which may lead to vibrations responsible for structure-borne noise. A low-speed wind-tunnel experiment was performed to quantify the potential of a flow-permeable leading edge to alleviate the slipstream-induced unsteady loading. For this purpose, a...

Comparison between analog and digital microphone phased arrays for aeroacoustic measurements

Microphone arrays are useful measurement devices for estimating the location and strength of sound sources. Numerous comparative studies have been conducted regarding the performance of acoustic imaging methods in the past, but literature lacks of a systematic investigation on the role of the hardware on the measurements. This research...

Effect of trailing edge serration-flow misalignment on airfoil noise emissions

The broadband noise generated by the scattering of turbulent flow at the trailing edge of a NACA 0018 airfoil with trailing edge serrations is investigated, varying both the airfoil angle of attack and serration flap angle. Acoustic emissions from the trailing edge are measured using a microphone array. The noise level is observed to be...

Acoustic Emissions of Semi-Permeable Trailing Edge Serrations

The trailing edge of a NACA 0018 airfoil is modified through the attachment of serrations with different degrees of permeability. Acoustic beamforming is used to inspect the turbulent boundary layer-trailing edge noise emissions from the unmodified and serrated trailing edges. Different freestream velocities and angles of attack are investigated...

Trailing edge serrations: Effect of their flap angle on flow and acoustics

Trailing edge serrations have been proven to work as a passive noise reduction device. Nevertheless, they have also previously been found to increase noise in a particular frequency range, argued in earlier research to be due to the misalignment of the serrations with the direction of the flow in the wake. It emerges as a high-frequency noise...

Acoustic measurements of a DU96-W-180 airfoil with flow-misaligned serrations at a high Reynolds number in a closed-section wind tunnel

Trailing-edge serrations are passive noise reduction add-ons widely used in wind-turbine applications. This study presents acoustic beamforming results of microphone array measurements of a cambered airfoil (DU96-W-180) in a closed-section wind-tunnel at a Reynolds number of industrial interest. Two different serration geometries with different...

Near-wall pressure fluctuations over noise reduction add-ons

Broadband Trailing-Edge Noise Reduction Using Permeable Metal Foams

Boundary layer characterization and acoustic measurements of flow-aligned trailing edge serrations

Trailing edge serrations designed to reduce airfoil self-noise are retrofitted on a NACA 0018 airfoil. An investigation of the boundary layer flow statistical properties is performed using time-resolved stereoscopic PIV. Three streamwise locations over the edge of the serrations are compared. An analysis of the results indicates that, while...