Searched for: +
(1 - 20 of 148)

Pages

document
Peng, K. (author)
In the upcoming decades, a substantial growth in the commercial aviation market is anticipated, accompanied by an increasing societal awareness of global warming. This circumstance necessitates a technological development for emission reduction in future transport aircraft. A method for aerodynamic efficiency improvement is the so-called Laminar...
doctoral thesis 2024
document
Luo, Bixiong (author), Zhang, Li (author), Peng, Kaijun (author), Ren, Zongdong (author), Li, Xiaoyu (author), Sun, Yanqian (author), Cai, Yanfeng (author), Tu, Jin (author)
conference paper 2024
document
Zhang, Li (author), Luo, Bixiong (author), Peng, Kaijun (author), Ren, Zongdong (author), Li, Xiaoyu (author), Zhu, Xiangdong (author), Duan, Dexuan (author), Liu, Haiyang (author), Cai, Yanfeng (author)
conference paper 2024
document
Peng, Y. (author), Zhang, Guanting (author), Nijhuis, S. (author), Agugiaro, G. (author), Stoter, J.E. (author)
Historic gardens, regarded as a significant genre of cultural heritage, encapsulate the enduring essence of bygone eras while concurrently transcending temporal boundaries to resonate with the present and future. These gardens provide us vitality and inspiration, holding a collective repository of human memory and serving as a testament to our...
journal article 2024
document
Meng, Zeng (author), Kong, Lin (author), Jiaxiang, Y. (author), Peng, Hao (author)
This paper proposes a new active learning method named as optimum-pursuing method (OPM) from the viewpoint of optimization theory, which aims to provide an effective tool for solving constrained optimization and reliability-based design optimization (RBDO) problems with low computation cost. It uses the cheap Kriging metamodel to replace the...
journal article 2024
document
Wuite, F.G.E. (author), Peng, Zhikai (author), Kim, K.J. (author), Lugten, M.C. (author), Tenpierik, M.J. (author)
This study aims to evaluate the impact of different urban building geometries (six courtyards, two canyons, two slabs) on heat mitigation and aircraft noise attenuation, in order to support an evidence-based retrofit plan for future airport neighborhoods. Using ’Pachyderm + ENVI-met simulations + field measurements’, we found that the slanted...
conference paper 2024
document
Kim, K.J. (author), Lugten, M.C. (author), Wuite, F.G.E. (author), Peng, Zhikai (author), Tenpierik, M.J. (author)
Analyzing the impact of aircraft noise on urban areas requires specific consideration of sound propagation over long distances, which is not typically covered by tools designed for indoor acoustics. Although it is unclear to what extent existing parametric tools that combine 3D modeling and acoustic simulation can accurately replicate these...
conference paper 2024
document
Lugten, Martijn (author), Wuite, F.G.E. (author), Peng, Zhikai (author), Tenpierik, M.J. (author)
Aircraft noise is a major stressor for communities in the vicinity of airports. Aircraft noise prediction models omit the built environment, based on an implicit assumption that the impact of buildings on the propagation of aircraft noise is neglectable. In this article a study is presented in which aircraft noise levels were measured near...
journal article 2024
document
Du, Yunlu (author), Huang, Yunkai (author), Guo, Baocheng (author), Djelloul-Khedda, Zakarya (author), Peng, Fei (author), Yao, Y. (author), Dong, J. (author)
In this article, a nonlinear semianalytical model (SAM) is presented to predict the magnetic field distribution (MFD) and electromagnetic performances (EPs) in the cubic spoke-type permanent magnet (PM) machine. To model the rectangular PMs, the rectangular PM is simplified as a combination of fan-shaped regions with different arc angles....
journal article 2024
document
Peng, Chen (author), Horn, Stefanie (author), Madigan, Ruth (author), Marberger, Claus (author), Lee, John D. (author), Krems, Josef (author), Beggiato, Matthias (author), Romano, Richard (author), Wei, Chongfeng (author), Wooldridge, Ellie (author), Happee, R. (author), Hagenzieker, Marjan (author), Merat, Natasha (author)
The driving style of an automated vehicle (AV) needs to be comfortable to encourage the broad acceptance and use of this newly emerging transport mode. However, current research provides limited knowledge about what influences comfort, how this concept is described, and how it is measured. This knowledge is especially lacking when comfort is...
journal article 2024
document
Zhu, Sicong (author), Yuan, Y. (author), Peng, Wenjie (author), Wu, Hangbin (author), Yu, Lei (author), Lan, Qing (author)
This article presents an integrated educational module for undergraduate traffic engineering at the microscale level. When dealing with a complex transportation system, the education program should cultivate students’ acquisition of both in-depth traffic specialization and breadth of engineering knowledge. For the educational instruction of...
journal article 2024
document
Li, Minglei (author), Peng, Shu (author), Nan, L. (author)
We propose a concept of hybrid geometry sets for registering cross-source geometric data. Specifically, our method focuses on the coarse registration of geometric data obtained from laser scanning and photogrammetric reconstruction. Due to different characteristics (e.g., variations in noise levels, density, and scales), achieving accurate...
journal article 2024
document
Li, Sihui (author), Peng, Jinqing (author), Wang, Meng (author), Wang, Kai (author), Li, Houpei (author), Lu, C.J. (author)
The energy matching of PV driven air conditioners is influenced by building load demand and PV generation. Merely increasing energy performance of building or PV capacity separately may improve the energy balance on a large time resolution, the real-time energy mismatching problem is still serious. In this study, a coordinated optimization...
journal article 2024
document
Zhang, Yanxu (author), Wu, Peipei (author), Xu, Ruochong (author), Wang, Xuantong (author), Lei, Lili (author), Schartup, Amina T. (author), Peng, Yiming (author), Pang, Qiaotong (author), Luijendijk, Arjen (author)
Correction to: Nature Communications, published online 13 March 2023 The original version of this Article contained an error in Fig. 2, in which c was incorrectly described as “middle scenario” where it should have been described as “low scenario”. The correct version of Fig. 2 is: (Figure presented.) which replaces the previous incorrect...
journal article 2023
document
Peng, C. (author), May, Ali (author), Abeel, T.E.P.M.F. (author)
BackgroundEnteric methane from cow burps, which results from microbial fermentation of high-fiber feed in the rumen, is a significant contributor to greenhouse gas emissions. A promising strategy to address this problem is microbiome-based precision feed, which involves identifying key microorganisms for methane production. While machine...
journal article 2023
document
Liu, Minghui (author), Wang, Ju (author), Peng, Z. (author)
To investigate energy-saving approaches in wastewater treatment plants and decrease aeration energy consumption, this study successfully established a floc-granule coexistence system in a sequencing batch airlift reactor (SBAR) employing micro-bubble aeration. The analysis focused on granule formation and pollutant removal under various...
journal article 2023
document
Zhang, Yanxu (author), Wu, Peipei (author), Xu, Ruochong (author), Wang, Xuantong (author), Lei, Lili (author), Schartup, Amina T. (author), Peng, Yiming (author), Pang, Qiaotong (author), Luijendijk, Arjen (author)
Marine plastic pollution poses a potential threat to the ecosystem, but the sources and their magnitudes remain largely unclear. Existing bottom-up emission inventories vary among studies for two to three orders of magnitudes (OMs). Here, we adopt a top-down approach that uses observed dataset of sea surface plastic concentrations and an...
journal article 2023
document
Lin, H. (author), Yang, Miao (author), Ru, Xiaoning (author), Wang, Genshun (author), Yin, Shi (author), Peng, Fuguo (author), Han, C. (author), Procel Moya, P.A. (author), Isabella, O. (author)
Silicon heterojunction (SHJ) solar cells have reached high power conversion efficiency owing to their effective passivating contact structures. Improvements in the optoelectronic properties of these contacts can enable higher device efficiency, thus further consolidating the commercial potential of SHJ technology. Here we increase the...
journal article 2023
document
Chi, Lin (author), Lu, Shuang (author), Li, Z. (author), Huang, Chendong (author), Jiang, Hui (author), Peng, Bin (author)
As an industrial by-product containing pozzolanic components, recycled ferronickel slag (FNS) has the potential to be supplementary cementitious materials (SCMs) to reduce the massive carbon footprint of the cement industry, however, the main limitation of ferronickel slag as SCMs is the low hydration rate at an early age. In this study, the...
journal article 2023
document
Chen, Qiting (author), Jia, Li (author), Menenti, M. (author), Hu, Guangcheng (author), Wang, Kun (author), Yi, Zhiwei (author), Zhou, Jie (author), Peng, Fei (author), Ma, Shaoxiu (author)
Information on crop yield is important for food security, in particular under the conditions of climate change and growing population worldwide. We developed a new fully distributed, high spatial resolution, model of biomass accumulation and crop yield applicable to a highly heterogeneous desert-oasis agroecosystem. The bulk of required input...
journal article 2023
Searched for: +
(1 - 20 of 148)

Pages