Searched for: +
(1 - 20 of 84)

Pages

document
Connolly, Ronan (author)
Ice accumulation on aircraft surfaces is a prevalent issue, and icephobic coating strategies can be implemented to assist in the removal of or ice on an aircraft. However little is known regarding the effects of novel icephobic coatings and surfaces on ice adhesion strength, which is difficult to measure and quantify, and is typically reported...
master thesis 2024
document
Li, Fengxiang (author), Fitrianie, S. (author), Bruijnes, M. (author), Abdulrahman, A. (author), Guo, Fu (author), Brinkman, W.P. (author)
In the published article, there was an error in Table 5. For each second construct/dimension, the means are swapped between Chinese and English data, which is caused by an error in the underlying R script. Consequently, the plus and minus signs for the delta and CI values are also wrong. The corrected Table 5 and its caption appear below....
journal article 2024
document
Hobeika, N. (author), Garcia Sanchez, C. (author), Bluyssen, P.M. (author)
The corona pandemic accelerated a lot of studies about aerosol dispersion and different aerosol-generating tasks ranging in intensity from sneezing to breathing. Both measurements and numerical simulations were used to understand the behaviour of aerosols. For numerical simulations, Computational Fluid Dynamic (CFD) simulations were used;...
conference paper 2023
document
Grottoli, M. (author), Mulder, Max (author), Happee, R. (author)
The use of driving simulators for training and for development of new vehicles is widely spread in the automotive industry. In the last decade, a few motorcycle riding simulators have been developed for similar purposes, with focus on maneuvering at high speed. This article presents the subjective and objective evaluation of a motorcycle...
journal article 2022
document
Lovato, S. (author), Toxopeus, S.L. (author), Settels, J.W. (author), Keetels, G.H. (author)
The ship’s resistance and manoeuvrability in shallow waters can be adversely influenced by the presence of fluid mud layers on the seabed of ports and waterways. Fluid mud exhibits a complex non-Newtonian rheology that is often described using the Herschel–Bulkley model. The latter has been recently implemented in a maritime finite-volume CFD...
journal article 2022
document
Wang, Lu (author), Robertson, Amy (author), Jonkman, Jason (author), Kim, Jang (author), Shen, Zhi‐Rong (author), Koop, Arjen (author), Chandramouli, P. (author), Viré, A.C. (author), Ramesh Reddy, L. (author)
Currently, the design of floating offshore wind systems is primarily based on mid-fidelity models with empirical drag forces. The tuning of the model coefficients requires data from either experiments or high-fidelity simulations. As part of the OC6 (Offshore Code Comparison Collaboration, Continued, with Correlation, and unCertainty (OC6) is a...
journal article 2022
document
Tajdari, F. (author), Toulkani, Naeim Ebrahimi (author)
Aiming at operating optimally minimizing error of tracking and designing control effort, this study presents a novel generalizable methodology of an optimal torque control for a 6-degree-of-freedom Stewart platform with rotary actuators. In the proposed approach, a linear quadratic integral regulator with the least sensitivity to controller...
journal article 2021
document
Kniestedt, I. (author), Gómez Maureira, Marcello A. (author), Lefter, I. (author), Lukosch, Stephan (author), Brazier, F.M. (author)
Validation of serious games tends to focus on evaluating their design as a whole. While this helps to assess whether a particular combination of game mechanics is successful, it provides little insight into how individual mechanics contribute or detract from a serious game's purpose or a player's game experience. This study analyses the effect...
journal article 2021
document
Groen, D. (author), Arabnejad, H. (author), Jancauskas, V. (author), Edeling, W. N. (author), Jansson, F.R. (author), Richardson, R. A. (author), Lakhlili, J. (author), Veen, L. (author), Bosak, B. (author)
We present the VECMA toolkit (VECMAtk), a flexible software environment for single and multiscale simulations that introduces directly applicable and reusable procedures for verification, validation (V&V), sensitivity analysis (SA) and uncertainty quantication (UQ). It enables users to verify key aspects of their applications,...
journal article 2021
document
Roungas, V. (author), Bekius, F.A. (author), Verbraeck, A. (author), Meijer, S.A. (author)
Gaming simulations (games) for policy and decision making have been the neglected “sibling” of educational and training games. The latter have experienced a widespread usage by practitioners and researchers, while the former have had limited, yet slowly increasing, adoption by organisations. As a result, various issues developing and using these...
journal article 2020
document
Ajanovic, Zlatan (author), Klomp, Matthijs (author), Lacevic, Bakir (author), Shyrokau, B. (author), Pretto, Paolo (author), Islam, Hassaan (author), Stettinger, Georg (author), Horn, Martin (author)
Closed-loop validation of autonomous vehicles is an open problem, significantly influencing development and adoption of this technology. The main contribution of this paper is a novel approach to reproducible, scenario-based validation that decouples the problem into several sub-problems, while avoiding to brake the crucial couplings. First,...
conference paper 2020
document
Rodrigo, Javier Sanz (author), Guillén, Fernando Borbón (author), Fernandes Correia, Pedro M. (author), García Hevia, Bibiana (author), Schlez, Wolfgang (author), Schmidt, Sascha (author), Basu, S. (author), Li, B. (author), Nielsen, Per (author)
journal article 2020
document
Danks, Brigitte (author)
The aim of this thesis was to objectively and quantitatively assess the accuracy and robustness of two-dimensional sequentially linear analysis (SLA) in comparison to nonlinear finite element analysis (NLFEA), for a range of experiments of reinforced concrete structures with proportional and non-proportional loading schemes. Non-proportional...
master thesis 2019
document
Akporotu, Richard (author)
<br/>This research has shed light on the capability of the HASP model in reproducing the dilatant behaviour of OC clays in drained and undrained conditions. The model is formulated by employing a combined hardening rule and uses the void ratio as a state variable while maintaining the simplicity of the MCC model. However, a sensitivity analysis...
master thesis 2019
document
Hulsbergen, Bas (author)
Shipyards these days see an increase in customers that specify combined speed and seakeeping ability design requirements. This requires the shipyard to make a prediction of the additional installed power required to maintain a certain speed when waves are encountered. The additional required installed power is directly related to the average...
master thesis 2019
document
Geertsma, R.D. (author)
Shipping plays a crucial role in modern society, but has to reduce its impact on the environment. The commercial availability of power electronic converters and lithium-ion batteries provides an opportunity to improve performance of ships energy systems while reducing their environmental impact. However, the degrees of freedom in control for...
doctoral thesis 2019
document
Breedeveld, J. (author), Zwanenburg, C. (author), Van, M. (author), Lengkeek, H.J. (author)
Levees in the Netherlands have traditionally been constructed from soil. Climate change and land subsidence require heightening and/or reinforcing these existing levees. Traditional reinforcements demand additional space, which in some cases conflicts with existing buildings. Applying sheet pile walls in levees allows for strengthening while...
conference paper 2019
document
de Vries, Tim (author)
A quick-scan algorithm has been developed in order to evaluate rooftop PV potential in the Netherlands. Both its panel fitting and yield prediction functions have been validated with existing systems monitored by Solar Monkey. The calculation times of different parts of the algorithm were measured and decreased while keeping the accuracy of the...
master thesis 2018
document
van Tiggelen, Maurice (author)
This report proposes improvements of the land surface model (LSM) used in the turbulence-resolving Dutch Atmospheric Large-Eddy Simulation model (DALES). Important changes include the infiltration of precipitation, the parametrization of the soil hydraulic functions and the formulation of the soil water extraction by vegetation roots. The...
master thesis 2018
document
Roungas, V. (author), Meijer, Sebastiaan (author), Verbraeck, A. (author)
Thirty years of research on validation and verification have returned a plethora of methods and statistical techniques through methodological and case studies. It is, however, this abundance of methods and techniques that poses a major challenge. Due to time and budget constraints, it is impossible to apply all the available methods and...
journal article 2018
Searched for: +
(1 - 20 of 84)

Pages