A Compact 10-MHz RC Frequency Reference With a Versatile Temperature Compensation Scheme

This article presents the design and implementation of a compact CMOS RC frequency reference. It consists of a frequency-locked loop (FLL) that locks the period of a voltage-controlled oscillator (VCO) to the time an RC network takes to charge to a reference voltage. Conventionally, an RC time constant with a near-zero temperature coefficient...

An Energy-Efficient 3.7-nV/√ Hz Bridge Readout IC With a Stable Bridge Offset Compensation Scheme

This paper describes an energy-efficient bridge readout IC (ROIC), which consists of a capacitively coupled instrumentation amplifier (CCIA) that drives a continuous-time delta–sigma modulator (CTM). By exploiting the CCIA’s ability<br/>to block dc common-mode voltages, the bridge’s bias voltage may exceed the ROIC’s supply voltage, allowing...

A 15-nW per Sensor Interference-Immune Readout IC for Capacitive Touch Sensors

This paper presents a readout IC that uses an asynchronous capacitance-to-digital-converter (CDC) to digitize the capacitance of a touch sensor. A power-efficient tracking algorithm ensures that the CDC consumes negligible power consumption in the absence of touch events. To facilitate its use in wake-on-touch applications, the CDC can be...

A 4.5 nV/√Hz Capacitively Coupled Continuous-Time Sigma-Delta Modulator with an Energy-Efficient Chopping Scheme

When chopping is applied to a continuous-time sigmadelta modulator (CTΣΔM), quantization noise fold-back often occurs, leading to increased in-band noise. This can be prevented by employing a return-to-zero (RZ) digital-to-analog converter (RZ DAC) in the modulator's feedback path and arranging the chopping transitions to coincide with its RZ...

A Hybrid Multi-Path CMOS Magnetic Sensor with 76 ppm/°C Sensitivity Drift and Discrete-Time Ripple Reduction Loops

This paper presents a temperature-insensitive magnetic sensor system for contactless current measurements. To simultaneously achieve wide bandwidth and low noise, the proposed system employs a multi-path structure with a set of spinning current Hall sensors in its low-frequency path and a set of pick-up coils in its high-frequency path. The...

Multipath Wide-Bandwidth CMOS Magnetic Sensors

This paper proposes a multipath multisensor architecture for CMOS magnetic sensors, which effectively extends their bandwidth without compromising either their offset or resolution. Two designs utilizing the proposed architecture were fabricated in a 0.18-μm standard CMOS process. In the first, the combination of spinning-current Hall sensors...

A Continuous-Time Ripple Reduction Technique for Spinning-Current Hall sensors

This paper presents a new ripple-reduction technique for spinning-current Hall sensors, which obviates the need for lowpass filtering to suppress the ripple caused by up-modulated sensor offset. A continuous-time ripple-free output is achieved by the use of three ripple reduction loops (RRLs), which continuously sense the offset ripple and then...