Lateral Inverse Proximity Effect in Ti/Au Transition Edge Sensors

We report measured T_c of superconducting Ti/Au bilayer strips with a width W varying from 5 to 50 µm. The strips were fabricated based on a Ti/Au bilayer that consists of a 41-nm-thick Ti layer to which a 280-nm-thick Au layer was added. We find that the T_c drops as W decreases and the declining trend almost perfectly...

Analysis of SN-BI solders: X-ray micro computed tomography imaging and microstructure characterization in relation to properties and liquid phase healing potential

This work provides an analysis of X-ray micro computed tomography data of Sn-xBi solders with x = 20, 30, 35, 47, 58 wt.% Bi. The eutectic thickness, fraction of eutectic and primary phase are analyzed. Furthermore, the 3D data is evaluated by means of morphology parameters, such as, shape complexity, flatness, elongation and mean intercept...

Distinguishing pure histopathological growth patterns of colorectal liver metastases on CT using deep learning and radiomics: a pilot study

Histopathological growth patterns (HGPs) are independent prognosticators for colorectal liver metastases (CRLM). Currently, HGPs are determined postoperatively. In this study, we evaluated radiomics for preoperative prediction of HGPs on computed tomography (CT), and its robustness to segmentation and acquisition variations. Patients with...

Image analysis for morphology, rheology and degradation study of railway ballast: A review

The performance and deformation of ballast bed are significantly influenced by the particle morphology (size and shape), the rheology (translation and rotation), and the degradation (breakage and abrasion). Regarding the ballast particle morphology, the ballast particle size is generally measured by sieving and described with the Particle Size...

Development of a Ti/Au TES Microcalorimeter Array as a Backup Sensor for the Athena/X-IFU Instrument

We are developing a transition edge sensor (TES) microcalorimeter array based on a Ti/Au superconducting bilayer, as a backup option for the X-IFU instrument on the Athena X-ray observatory. The array is read out by a frequency-division multiplexing readout system using a 1–5 MHz frequency band. Extensive research collaborations between NASA...

Generation and evaluation of an artificial optical signal based on X-ray measurements for bubble characterization in fluidized beds with vertical internals

The performance of fluidized bed reactors strongly depends on the bubble behavior, for which reason knowledge concerning the bubble properties is important for modeling and reactor optimization. X-ray measurements can be used to characterize bubbles within the cross-section of a fluidized bed on a laboratory scale, but cannot easily be...

On the hydrodynamics of membrane assisted fluidized bed reactors using X-ray analysis

The application of membrane assisted fluidized bed reactors for distributed energy production has generated considerable research interest during the past few years. It is widely accepted that, due to better heat and mass transfer characteristics inside fluidized bed reactors, the reactor efficiency can outperform other reactor configurations...

Nonproportionality of inorganic scintillators

A scintillator is a transparent material that emits a flash of light when it absorbs a ?-ray photon or an energetic particle. Scintillation crystals are widely used as spectroscopic detectors of ionizing radiation in nuclear science, space exploration, medical imaging, homeland security, etc. This thesis is about nonproportional response of...

Relics in medieval altarpieces? Combining X-ray tomographic, laminographic and phase-contrast imaging to visualize thin organic objects in paintings

X-ray radiography is a common tool in the study of old master paintings. Transmission imaging can visualize hidden paint layers as well as the structure of the panel or canvas. In some medieval altarpieces, relics seem to have been imbedded in the wooden carrier of paintings. These are most probably thin organic fibrous materials such as paper...

Playing hard to catch: Seeing more with less (radiation)

X-ray and gamma radiation are widely used in hospitals and laboratories, and in the manufacturing and mining industries. Several methods exist for making the radiation "visible", including scintillators, films, and semiconductor materials. Scintillators are crystals that convert ionising radiation into visible light. This is a field in which...