- document
-
Grazian, F. (author), Shi, W. (author), Dong, J. (author), van Duijsen, P.J. (author), Soeiro, Thiago B. (author), Bauer, P. (author)In the next decades, the number of electric vehicles (EVs) for private use is predicted to increase considerably. Charging the EVs through wireless power transfer (WPT), i.e. wireless charging, has the potential to shorten charging duration of EVs batteries through dynamic charging and it would also improve the safety of static charging in case...conference paper 2019
- document
-
Zucca, Mauro (author), Bottauscio, Oriano (author), Harmon, Stuart (author), Guilizzoni, Roberta (author), Schilling, Florian (author), Schmidt, Matthias (author), Ankarson, Peter (author), Bauer, P. (author), Dong, J. (author)The European Union funded project MICEV aims at improving the traceability of electrical and magnetic measurement at charging stations and to better assess the safety of this technology with respect to human exposure. The paper describes some limits of the instrumentation used for electrical measurements in the charging stations, and briefly...conference paper 2019
- document
-
Shi, W. (author), Dong, J. (author), Bandyopadhyay, S. (author), Grazian, F. (author), Soeiro, Thiago B. (author), Bauer, P. (author)This paper aims to identify the difference between foreign object (FO) and misalignment in terms of their influence on inductive power transfer (IPT) systems. This is performed through magnetic and equivalent circuit analysis of the mutual inductance, primary input impedance, charging pad terminal impedance and current harmonics. Experiment...conference paper 2019
- document
-
Cao, Z. (author), Dong, J. (author), Wani, F.M. (author), Polinder, H. (author), Bauer, P. (author), Peng, Fei (author), Huang, Yunkai (author)A novel controller design procedure is proposed for a 5-degree-of-freedom (DOF) active magnetic bearing (AMB) system, based on sliding mode control (SMC) and neural network (NN). The SMC is used to achieve high robustness and fast response while the NN can compensate unmodeled uncertainty and external disturbance by on-line tuning algorithm. The...conference paper 2019
- document
-
Zwartbol, Arnout (author), Dong, J. (author), Bauer, P. (author), Polinder, H. (author)This paper proposes an online motor-parameter-estimator for a permanent magnet synchronous motor (PMSM) in an electric vehicle (EV) powertrain. The proposed method uses a recursive least squares filter approach in combination with the discrete time dynamic voltage equations. Stator resistance estimation is decoupled from the estimator using...conference paper 2019
- document
-
Bandyopadhyay, S. (author), Dong, J. (author), Qin, Z. (author), Bauer, P. (author)Inductive power transfer (IPT) is becoming increasingly popular in stationary electric vehicle charging systems. In this paper, the influence of the different IPT coupler geometries on the performance factors efficiency, power density, misalignment tolerance, and stray field is studied. Five different cou-pler topologies namely the circular,...conference paper 2019
- document
-
Wang, Lu (author), Qin, Z. (author), Dong, J. (author), Bauer, P. (author)In recent years, electrical vehicle (EV) starts showing its unique advantages that the conventional combustion vehicles do not have. Together with the increasing interests on EV, the motor drive with higher efficiency and lighter weight also becomes more attractive. A promising solution is to apply the wide band gap (WBG) components including...conference paper 2019
- document
-
Garbatov, Y. (author), Ås, S.K. (author), Branner, Kim (author), Choi, B.K. (author), den Besten, J.H. (author), Dong, P. (author), Lillemäe, I. (author), Lindstrom, P. (author), Lourenço de Souz, M. (author), Parmentier, G. (author), Quéméner, Y. (author), Rizzo, C.M. (author), Rörup, J. (author), Vhanmane, Suhas (author), Villavicencio, R. (author), Wang, F. (author), Yuan, Yue (author)Concern for crack initiation and growth under cyclic loading as well as unstable crack propagation and tearing in the ship and offshore structures. Due attention shall be paid to the suitability and uncertainty of physical models and testing. Consideration is to be given to practical application, statistical description and fracture control...conference paper 2018
- document
-
Bandyopadhyay, S. (author), Dong, J. (author), Ramirez Elizondo, L.M. (author), Bauer, P. (author)Inductive power transfer (IPT) is gaining popularity across a wide range of battery charging applications like biomedical, consumer electronics and electric vehicle (EV) charging. One of the major challenges in designing IPT charge pads is determining the optimal physical sizes of the magnetic couplers resulting in efficient power transfer...conference paper 2018
- document
-
Wani, F.M. (author), Dong, J. (author), Yadav, Avinash (author), Polinder, H. (author)Flooded Generators have been proposed as a possible solution to eliminate the risks due to the seal failure, and improve cooling in tidal stream turbine generators. In a flooded generator, the stator-rotor gap is filled with the seawater; this poses a serious corrosion risk to the material inside the generator. For this reason, a can or a...conference paper 2018
- document
-
Wani, F.M. (author), Dong, J. (author), Polinder, H. (author)Permanent magnet machines with fractional slot windings are popular because of their shorter end windings, low cost and ease of manufacturing. On the other hand, fractional slot machines have higher eddy current losses in the rotor magnets and sleeve. An accurate calculation of these losses usually involves a time-stepped finite-element analysis...conference paper 2018
- document
-
Gao, Y. (author), Dong, J. (author), Isabella, O. (author), Zeman, M. (author), Zhang, G (author)Diverse solar irradiance spectra can be observed under different conditions of time, date, location, weather, etc. Since the solar irradiance spectrum is required by certain scientific and engineering applications, obtaining accurate spectral data is essential. Measurements by spectrophotometers are able to achieve accurate real-time data with...conference paper 2016
- document
-
Substantial sound waves can be generated by boundary-layer instability modes when the latter are scattered by a rapid mean-flow distortion. This is a rather generic mechanism and operates when an oncoming T-S wave is scattered by a steady local suction slot. This paper focuses on this problem by extending a recently developed Local Scattering...conference paper 2015
- document
-
Coherent structures in statistically-stationary homogeneous shear turbulence (HST) are compared with those of the detached family in channels. Similarly to attached ones, detached Qs in channels form streamwise trains of side-by-side groups of a Q2 and a Q4. This is also true in HST. Contrary to attached structures, but similarly to those in HST...conference paper 2015
- document
-
Zhu, G. (author), Wu, Z. (author), Zhou, Y. (author), Tang, J. (author), Dong, B. (author), Han, N. (author), Xing, F. (author)Epoxy E-51/UF resin microcapsules were prepared by traditional two-stepped in situ polymerization method and processing parameters affecting the final microcapsules shape and size were carefully studied in the aim to obtain microcapsule with ideally spherical shape and uniform size. Its found the polycarboxylate surfactant of SMA (styrene...conference paper 2013
- document
-
Zhu, G. (author), Lü, L. (author), Tang, J. (author), Dong, B. (author), Han, N. (author), Xing, F. (author)For epoxy microcapsules embedded in concrete as mechanic-triggered self-healing adhesive, globular shape with uniform size is the basic requirement to ensure the solid shell broken and the liquid core released at a designed stress. In this paper, monodispersed melamineformaldehyde (MF) resin-walled epoxy E-51 microcapsules were successfully...conference paper 2013
- document
-
Xiong, W. (author), Zhu, G. (author), Tang, J. (author), Dong, B. (author), Han, N. (author), Xing, F. (author), Schlangen, H.E.J.G. (author)Poly (urea-formaldehyde) (PUF) shelled dicyclopentadiene (DCPD) microcapsules were prepared by in-situ polymerization technology for self-healing concrete applications. It’s found, during the process, sodium dodecyl benzene sulfonate (SDBS) behaves better in emulsification of DCPD than other surfactant of sodium lauryl sulfate (SLS) and styrene...conference paper 2013
- document
-
Dong, H. (author), Huang, H. (author), Ye, G. (author)Many types of healing agents have been investigated. These agents are processed in different ways, such as adhesive polymer in capsules or hollow fibre glasses, bacteria in porous aggregates and geo-materials directly incorporated in the cementbased materials. In this study, sodium silicate powder is encapsulated in polystyrene particles ...conference paper 2013
- document
-
Dong, H. (author), Huang, H. (author), Ye, G. (author)Many types of healing agents have been investigated. These agents are processed in different ways, such as adhesive polymer in capsules or hollow fibre glasses, bacteria in porous aggregates and geo-materials directly incorporated in the cementbased materials. In this study, sodium silicate powder is encapsulated in polystyrene particles ...conference paper 2013
- document
-
Dong, B. (author), Wang, Y. (author), Han, N. (author), Xing, F. (author)A novel chemical self-healing system based on microcapsule technology for cementitious composites is established in Guangdong Key Laboratory of Durability for Coastal Civil Engineering, Shenzhen University. The key issue of this system is how to release the healing material and how to activate the healing mechanism. In this paper, the study is...conference paper 2013