A Compact Transformer-Based Fractional-N ADPLL in 10-nm FinFET CMOS

In this article, we introduce a fractional-N all-digital phase-locked loop (ADPLL) architecture based on a single LC-tank, featuring an ultra-wide tuning range (TR) and optimized for ultra-low area in 10-nm FinFET CMOS. Underpinned by excellent switches in the FinFET technology, a high turn-on/off capacitance ratio of LC-tank switched...

Fast age-hardening response of Al–Mg–Si–Cu–Zn–Fe–Mn alloy via coupling control of quenching rate and pre-aging

The coupling control of quenching rate and pre-aging and its positive effect on the age-hardening response of Al–Mg–Si–Cu–Zn–Fe–Mn alloy was systematically investigated. The larger and more stable solute clusters can be formed in alloy with fast age-hardening response by using the lower quenching rate (5.3 °C/min) and an appropriate pre-aging...

A novel bi-level distributed dynamic optimization method of ship fleets energy consumption

The optimization of ship energy consumption is attracting a great deal of attention, as societies seek to save energy and reduce emissions. Shipping companies are more concerned with the energy consumption of a ship fleet, as opposed to that of a single ship. Because the energy consumption of a fleet is influenced by multiple factors...

A novel method for joint optimization of the sailing route and speed considering multiple environmental factors for more energy efficient shipping

Energy saving and emission reduction have attracted a great deal of attention in the maritime industry. The optimization of a ship's energy efficiency can reduce energy consumption and CO₂ emissions effectively. However, most of the available studies only focus on either the sailing speed or route optimization, and the interaction...

Uptake of heavy metal ions in layered double hydroxides and applications in cementitious materials: Experimental evidence and first-principle study

The uptake mechanism of heavy metal ions in layered double hydroxides (LDHs) is investigated in this paper via solid-solution exchange experiments and first principle study. The uptake capacities of C-LDHs for heavy metal ions from solutions are experimentally investigated and the structures of LDHs doped with various heavy metal ions are...

Preparation of a poly(acrylic acid) based hydrogel with fast adsorption rate and high adsorption capacity for the removal of cationic dyes

A biocompatible Dex-MA/PAA hydrogel was prepared through copolymerization of glycidyl methacrylate substituted dextran (Dex-MA) with acrylic acid (AA), which was applied as the adsorbent to remove cationic dyes from aqueous solutions. Dex-MA/PAA hydrogel presented a fast adsorption rate and the removal efficiency of Methylene Blue (MB) and...

Data driven discovery of cyber physical systems

Cyber-physical systems embed software into the physical world. They appear in a wide range of applications such as smart grids, robotics, and intelligent manufacturing. Cyber-physical systems have proved resistant to modeling due to their intrinsic complexity arising from the combination of physical and cyber components and the interaction...

A modified carrier-to-code leveling method for retrieving ionospheric observables and detecting short-term temporal variability of receiver differential code biases

Sensing the ionosphere with the global positioning system involves two sequential tasks, namely the ionospheric observable retrieval and the ionospheric parameter estimation. A prominent source of error has long been identified as short-term variability in receiver differential code bias (rDCB). We modify the carrier-to-code leveling (CCL), a...

Exploring the driving factors of construction industrialization development in China

Construction industrialization (CI) has been adopted worldwide because of its potential benefits. However, current research shows the incentives for adopting CI may differ in different regions. While the promotion of CI in China is still at the initial stage, a systematical analysis of the driving factors would help decision makers get a...

Joint estimation of vertical total electron content (VTEC) and satellite differential code biases (SDCBs) using low-cost receivers

Vertical total electron content (VTEC) parameters estimated using global navigation satellite system (GNSS) data are of great interest for ionosphere sensing. Satellite differential code biases (SDCBs) account for one source of error which, if left uncorrected, can deteriorate performance of positioning, timing and other applications. The...

Chitosan cross-linked poly(acrylic acid) hydrogels: drug release control and mechanism

Chitosan has been used to cross-link poly(acrylic acid) to give three pH-sensitive hydrogels designed to control the release of the drugs amoxicillin and meloxicam. The extent of cross-linking and solution pH was found to dominate the swelling behavior of these hydrogels as shown by scanning electron microscopy and swelling time dependencies....

Initial Plug and Seal Design for the Dutch Repository Concept (PPT)

Integrity monitoring-based ratio test for GNSS integer ambiguity validation

The combination of multiple global navigation satellite systems (GNSSs) is able to improve the accuracy and reliability, which is beneficial for navigation in safety–critical applications. Due to the relatively low accuracy of pseudorange observations, the single-epoch GNSS real-time kinematic (RTK) using phase observations can be utilized to...

Evaluation of Plastic Deformation During Metal Forming by Using Lode Parameter

In the present research, the relationship between the strain increment and Lode parameter was obtained by using Lode parameter and Levy-Mises equation. The quantitative relation between different strain increments was presented and the relationship between plastic deformation types and Lode parameter was demonstrated. The relations between...