Searched for: +
(21 - 40 of 47)

Pages

document
Wobbes, Elizaveta (author), Tielen, R.P.W.M. (author), Möller, M. (author), Vuik, Cornelis (author), Galavi, Vahid (author)
Both the Material Point Method (MPM) and meshfree schemes based on optimal transport theory have been developed for efficient and robust integration of the weak form equations originating from computational mechanics. Although the methods are derived in a different fashion, their algorithms share many similarities. In this paper, we outline the...
conference paper 2019
document
Hosseinimehr, S.M. (author), Al Kobaisi, Mohammed (author), Vuik, Cornelis (author), Hajibeygi, H. (author)
An algebraic dynamic multilevel (ADM) method for multiphase flow in heterogeneous fractured porous media using the projection-based embedded discrete fracture model (pEDFM) is presented. The fine-scale discrete system is obtained independently for matrix and each lower-dimensional fracture. On the finescale high resolution computational grids,...
conference paper 2019
document
Markensteijn, A.S. (author), Vuik, Cornelis (author)
The coupling of single-carrier network into multicarrier energy systems (MES) has recently become more important. Conventional single-carrier steady-state load flow models are not able to capture the full extent of the coupling. Different models for multi-carrier networks have been proposed, either based on the energy hub concept or using a...
conference paper 2019
document
Sereeter, B. (author), Vuik, Cornelis (author), Witteveen, C. (author), Palensky, P. (author)
In this paper, we study four equivalent mathematical formulations of the Optimal Power Flow (OPF) problem and their impacts on the performance of solution methods. We show how four mathematical formulations of the OPF problem can be obtained by rewriting equality constraints given as the power flow problem into four equivalent mathematical...
conference paper 2019
document
Hosseinimehr, S.M. (author), Arbarim, Rhadityo (author), Cusini, M. (author), Vuik, Cornelis (author), Hajibeygi, H. (author)
A dynamic multilevel method for fully-coupled simulation of flow and heat transfer in heterogeneous and fractured geothermal reservoirs is presented (FG-ADM). The FG-ADM develops an advanced simulation method which maintains its efficiency when scaled up to field-scale applications, at the same time, it remains accurate in presence of complex...
conference paper 2019
document
El Abbassi, M. (author), Dimas Ramadhan Abdillah Fikri, Dimas (author), Lahaye, D.J.P. (author), Vuik, Cornelis (author)
The wish to reduce the environmental footprint and to enhance economic gains of rotary kilns pushes the numerical simulation of combustion to include conjugate heat transfer. In this paper we study the influence of the refractory wall and radiative heat loss to the ambient, on the combustion process of a reference kiln model. Numerical results...
conference paper 2018
document
Tielen, R.P.W.M. (author), Möller, M. (author), Vuik, Cornelis (author)
Introduced in [1], Isogeometric Analysis (IgA) has become widely accepted in academia and industry. However, solving the resulting linear systems remains a challenging task. For instance, the condition number of the Poisson operator scales quadratically with the mesh width h, but, in contrast to standard Finite Elements, exponentially with the...
conference paper 2018
document
Nakate, P.A. (author), Lahaye, D.J.P. (author), Vuik, Cornelis (author), Talice, Marco (author)
The anode baking process is developed and improved since the 1980s due to its importance in Aluminium industry. The process is characterized by multiple physical phenomena including turbulent flow, combustion process, conjugate heat transfer, and radiation. In order to obtain an efficient process with regards to quality of anodes, soot-free...
conference paper 2018
document
Hosseinimehr, S.M. (author), Arbarim, R.B. (author), Cusini, M. (author), Vuik, Cornelis (author), Hajibeygi, H. (author)
Accurate numerical simulation of coupled fluid flow and heat transfer in heterogeneous geothermal reservoirs demand for high resolution computational grids. The resulting fine-scale discrete systems--though crucial for accurate predictions--are typically upscaled to lower resolution systems due to computational efficiency concerns. Therefore,...
conference paper 2018
document
Diaz Cortes, G.B. (author), Jansen, J.D. (author), Vuik, Cornelis (author)
We explore and develop POD-based deflation methods to accelerate the solution of large-scale linear systems resulting from two-phase flow simulation. The techniques here presented collect information from the system in a POD basis, which is later used in a deflation scheme. The snapshots required to obtain the POD basis are captured in two ways:...
conference paper 2018
document
Vuik, V. (author), Jonkman, Sebastiaan N. (author), van Vuren, S. (author)
Vegetated foreshores such as salt marshes, mangrove forests and reed fields can reduce wave loads on coastal dikes due to depth-induced wave breaking and wave attenuation by vegetation. Here we present field measurements of wave propagation over salt marshes during severe storm conditions, a modelling approach to describe the effect of...
conference paper 2016
document
Diaz Cortes, G.B. (author), Vuik, Cornelis (author), Jansen, J.D. (author)
We consider deflation-based pre-conditioning of the pressure equation for large-scale reservoir models with strong spatial variations in the permeabilities. The use of deflation techniques involves the search for good deflation vectors, which usually are problem-dependent. We propose the use of proper orthogonal decomposition (POD) to generate...
conference paper 2016
document
Thomas, R. (author), Lahaye, D.J.P. (author), Vuik, C. (author), Van der Sluis, L. (author)
Simulation of current interruption is currently performed with non-ideal switching devices for large power systems. Nevertheless, for small networks, non-ideal switching devices can be substituted by arc models. However, this substitution has a negative impact on the computation time. At the same time, these simulations are useful to design...
conference paper 2015
document
Van Wageningen-Kessels, F.L.M. (author), Hoogendoorn, S.P. (author), Vuik, C. (author), Van Lint, J.W.C. (author)
conference paper 2014
document
Van Wageningen-Kessels, F.L.M. (author), Van Lint, J.W.C. (author), Hoogendoorn, S.P. (author), Vuik, C. (author)
We propose and analyze a generic multi-class kinematic wave traffic flow model: Fastlane. The model takes into account heterogeneity among driver-vehicle units with respect to speed and space occupancy: long vehicles with large headways (e.g. trucks) take more space than short vehicles with short headways (e.g. passenger cars). Moreover, and...
conference paper 2014
document
Aissa, M.H. (author), Verstraete, Tom (author), Vuik, Cornelis (author)
Graphics Processing Units (GPUs) are a promising alternative hardware to Central<br/>Processing Units (CPU) for accelerating applications with a high computational power demand. In many fields researchers are taking advantage of the high computational power present in GPUs to speed up their applications. These applications span from data mining...
conference paper 2014
document
Pereira, S.P. (author), Vuik, K. (author), Pinho, F.T. (author), Nobrega, J.M. (author)
The present work explores the massively parallel capabilities of the most advanced architecture of graphics processing units (GPUs) code named “Fermi”, on a two-dimensional unstructured cell-centred finite volume code. We use the SIMPLE algorithm to solve the continuity and momentum equations that was fully ported to the GPU. The benefits of...
conference paper 2013
document
Van Wageningen-Kessels, F.L.M. (author), Van Lint, J.W.C. (author), Vuik, C. (author), Hoogendoorn, S.P. (author)
In the last decade many multi class kinematic wave (MCKW) traffic ow models have been proposed. MCKW models introduce heterogeneity among vehicles and drivers. For example, they take into account differences in (maximum) velocities and driving style. Nevertheless, the models are macroscopic and the ow is modeled as a continuum flow, without...
conference paper 2012
document
Javierre, E. (author), Garcia Espallargas, S.J. (author), Mol, J.M.C. (author), Vermolen, F.J. (author), Vuik, C. (author), Van der Zwaag, S. (author)
conference paper 2011
document
Javierre, E. (author), Vuik, C. (author), Vermolen, F.J. (author), Segal, A. (author), Van der Zwaag, S. (author)
In thermal processing of alloys, homogenization of the as-cast microstructure by annealing at such a high temperature that unwanted precipitates are fully dissolved, is required to obtain a microstructure suited to undergo heavy plastic deformation. This process is governed by Fickian diffusion and can be modelled as a Stefan problem. In binary...
conference paper 2006
Searched for: +
(21 - 40 of 47)

Pages