Searched for: +
(21 - 40 of 145)

Pages

document
Başkaya, A.O. (author), Hickel, S. (author)
A conservative cut-cell immersed boundary (IB) method including gas-surface interactions (GSI) for the simulation of atmospheric entry flows under thermochemical nonequilibrium (TCNE) conditions is presented. The performance<br/>of the method is demonstrated for three test cases: a compression ramp, a cylinder, and a plasma wind tunnel ablator...
conference paper 2023
document
Hobeika, N. (author), Garcia Sanchez, C. (author), Bluyssen, P.M. (author)
The corona pandemic accelerated a lot of studies about aerosol dispersion and different aerosol-generating tasks ranging in intensity from sneezing to breathing. Both measurements and numerical simulations were used to understand the behaviour of aerosols. For numerical simulations, Computational Fluid Dynamic (CFD) simulations were used;...
conference paper 2023
document
Raghavan, V. (author), Simonetti, Irene (author), Lavidas, G. (author), Metrikine, A. (author), Cappietti, Lorenzo (author)
Utilization of Boundary Element Method (BEM) based on linear potential flow for modelling Oscillating Water Column (OWC) devices has gained popularity in the last two decades. The commercial BEM solver WAMIT has been used widely for modelling OWCs and validated using experimental modelling (Delauré et. al. 2003, Bingham et. al. 2015, Faÿ 2020)....
conference paper 2023
document
Yildiz, B. (author), Uijttewaal, W.S.J. (author)
Compound weirs are used as flow diversion structures by adding additional flow resistance to the anticipated regions at the rivers. Furthermore, they are used for measuring and regulating flow rates accurately over a wide range of flow depths. When they are used for this purpose, the cross sections are generally selected as symmetrical having...
conference paper 2023
document
Wang, J. (author), Yan, Xin ping (author), Boersma, B.J. (author), Lu, Ming jian (author), Liu, Xiaohua (author)
Printed circuit heat exchangers (PCHE) are designed to improve heat recovery and energy saving in supercritical CO<sub>2</sub> (S-CO<sub>2</sub>) power cycles. In the current study, a modified channel PCHE is proposed based on the regular straight channel and a zigzag channel. The thermal–hydraulic performance of four different types of PCHE...
journal article 2023
document
Holkema, K. J. (author), Aalbers, C. (author), Wellens, P.R. (author)
In head waves, water jet impacts due to run up can occur as a result of the structural configuration of some floating structures, reducing workability. Wave attenuation near the floater may reduce the risk of water jet impacts. This paper presents a numerical study of the performance and attenuation mechanisms of various plate type fixed free...
journal article 2023
document
Zou, P. (author), Ruiter, N. (author), Bricker, J.D. (author), Uijttewaal, W.S.J. (author)
The effects of surface roughness as induced by marine fouling on the hydrodynamic forces on a submerged floating tunnel (SFT) are experimentally and numerically investigated in detail at Reynolds numbers Re = 8.125 × 10<sup>3</sup>–5.25 × 10<sup>4</sup>. A sensitivity analysis to different roughness parameters including roughness height,...
journal article 2023
document
Begall, Moritz J. (author), Schweidtmann, A.M. (author), Mhamdi, Adel (author), Mitsos, Alexander (author)
Computational Fluid Dynamics (CFD) is a powerful tool which can help with the geometry optimization of continuous milli-scale reactors, which often are highly complex devices. Attempting to perform this optimization by manually modifying and testing geometry configurations can however be tedious and computationally inefficient. Addressing...
journal article 2023
document
Dutta, Debasish (author), Afzal, Mohammad Saud (author), Alhaddad, S.M.S. (author)
This study utilizes three-dimensional simulations to investigate scour in combined wave–current flows around rectangular piles with various aspect ratios. The simulation model solves the Reynolds-averaged Navier–Stokes (RANS) equations using the k–ω turbulence model, and couples the Exner equation to compute bed elevation changes. The model also...
journal article 2023
document
Perinajová, R. (author), Álvarez-Cuevas, Concepción Borrás (author), Juffermans, Joe (author), Westenberg, Jos (author), Lamb, Hildo (author), Kenjeres, S. (author)
There is a pressing need to establish novel biomarkers to predict the progression of thoracic aortic aneurysm (TAA) dilatation. Aside from hemodynamics, the roles of oxygen (O<sub>2</sub>) and nitric oxide (NO) in TAA pathogenesis are potentially significant. As such, it is imperative to comprehend the relationship between aneurysm presence...
journal article 2023
document
Perinajová, R. (author), van Ooij, Pim (author), Kenjeres, S. (author)
A long-time exposure to lack of oxygen (hypoxia) in some regions of the cerebrovascular system is believed to be one of the causes of cerebral neurological diseases. In the present study, we show how a combination of magnetic resonance imaging (MRI) and computational fluid dynamics (CFD) can provide a noninvasive alternative for studying...
journal article 2023
document
Fuentes Monjas, B. (author), Head, A.J. (author), de Servi, C.M. (author), Pini, M. (author)
This work assessed the accuracy of the SU2 flow solver in predicting the isentropic expansion of Siloxane MM through the converging-diverging nozzle test section of the Organic Rankine Cycle Hybrid Integrated Device (ORCHID) [9]. The expansion is modeled using compressible Euler equations, and assuming adiabatic flow, while the fluid...
book chapter 2023
document
Vesper, J.E. (author)
Physical Vapor Deposition (PVD) is the resublimation of a substance on a cold surface coating it with a thin solid layer. PVD coatings are utilized in industry to modify surface properties and appearance. Since the industrial process requires vacuum conditions, it has been mainly conducted in a batch process. Recently, PVD is considered a...
doctoral thesis 2022
document
VanDercreek, Colin (author)
<br/>Aerodynamic noise produced by aircraft, wind turbines, and other objects subjected to airflow contribute to environmental noise pollution, which adversely affects human and animal health. Consequently, governments impose restrictions on aircraft and wind turbine noise levels. These restrictions can have an economic impact by limiting...
doctoral thesis 2022
document
Nakate, P.A. (author)
Industrial emissions are discussed worldwide for their adverse effects on the global climate change. Nitric oxide (NOx) emissions are harmful among the various flue gases emitted in the atmosphere. There are multiple routes of formation of NOx in industry. The formation of NOx due to local overheating in fuel lean conditions is the most common...
doctoral thesis 2022
document
Romani, G. (author)
The accurate and reliable prediction of the aerodynamic noise sources of open rotors and ducted-fans in electric Vertical Take-Off and Landing (eVTOL) and non-conventional aircraft configurations is a challenging task from a computational perspective. Indeed, such propulsive systems can often operate in highly distorted and non-homogeneous flows...
doctoral thesis 2022
document
Puiman, L. (author), Abrahamson, Britt (author), van der Lans, R.G.J.M. (author), Haringa, C. (author), Noorman, H.J. (author), Picioreanu, C. (author)
Mass transfer limitations in syngas fermentation processes are mostly attributed to poor solubility of CO and H<sub>2</sub> in water. Despite these assumed limitations, a syngas fermentation process has recently been commercialized. Using large-sale external-loop gas-lift reactors (EL-GLR), CO-rich off-gases are converted into ethanol, with...
journal article 2022
document
Dehdashti Akhavan, Navid (author), Abroug, Foued (author), Arnaud, Lionel (author), Hooman, K. (author)
High-pressure drops characteristic of microchannel heat sinks (MCHS) is an issue that needs to be addressed to reduce the size of heat-removing devices in compact electronic devices. Supercritical carbon dioxide (s-CO₂) is a suitable candidate being proposed as an alternative coolant to enhance the cooling of the microchannel heat sink (MCHS)...
journal article 2022
document
Foroozesh, Jamal (author), Hosseini, S. H. (author), Ahmadian Hosseini, A. J. (author), Parvaz, F. (author), Elsayed, K. (author), Uygur Babaoğlu, Nihan (author), Hooman, K. (author), Ahmadi, G. (author)
The rising energy demand for buildings has enhanced public awareness of sustainable energy sources and technologies. In particular, natural ventilation systems such as wind-catchers have attracted considerable new attention. A new wind-catcher design with single-stage direct-air evaporative cooling was proposed for indoor air conditioning. An...
journal article 2022
document
Lovato, S. (author), Toxopeus, S.L. (author), Settels, J.W. (author), Keetels, G.H. (author)
The ship’s resistance and manoeuvrability in shallow waters can be adversely influenced by the presence of fluid mud layers on the seabed of ports and waterways. Fluid mud exhibits a complex non-Newtonian rheology that is often described using the Herschel–Bulkley model. The latter has been recently implemented in a maritime finite-volume CFD...
journal article 2022
Searched for: +
(21 - 40 of 145)

Pages