Searched for: +
(21 - 40 of 302)

Pages

document
Cheng, H. (author), Weemstra, C. (author), Hendriks, M.A.N. (author), Yang, Y. (author)
Coda wave interferometry (CWI) holds promise as a technique for concrete stress monitoring. This is because the coda, which consists of multiply scattered arrivals, is the result of propagation through the medium over large distances. As such, it is sensitive to both minute structural changes and small velocity changes in that medium....
journal article 2023
document
de Vries, J.W. (author), Sun, M. (author), de Groot, N.M.S. (author), Hendriks, R.C. (author)
Estimating tissue conductivity parameters from electrograms (EGMs) could be an important tool for diagnosing and treating heart rhythm disorders such as atrial fibrillation (AF). One of these parameters is the fibre direction, often assumed to be known in conductivity estimation methods. In this paper, a novel method to estimate the fibre...
conference paper 2023
document
Difrancesco, S. (author), van Baardewijk, J.U. (author), Cornelissen, A.S. (author), Varon, Carolina (author), Hendriks, R.C. (author), Bouwer, A.M. (author)
Wearable sensors offer new opportunities for the early detection and identification of toxic chemicals in situations where medical evaluation is not immediately possible. We previously found that continuously recorded physiology in guinea pigs can be used for early detection of exposure to an opioid (fentanyl) or a nerve agent (VX), as well as...
journal article 2023
document
Li, C. (author), Hendriks, R.C. (author)
Spatial filtering techniques typically rely on estimates of the target relative transfer function (RTF). However, the target speech signal is typically corrupted by late reverberation and ambient noise, which complicates RTF estimation. Existing methods subtract the noise covariance matrix to obtain the target plus late reverberation covariance...
conference paper 2023
document
Zeng, Jinchen (author), Butler, R.M. (author), van den Dobbelsteen, J.J. (author), Hendriks, B.H.W. (author), van der Elst, M. (author), Dauwels, J.H.G. (author)
In this paper, we aim to design an automatic camera pose estimation pipeline for clinical spaces such as catheterization laboratories. Our proposed pipeline exploits Scaled-YOLOv4 to detect fixed objects. We adopt the self-supervised key-point detector SuperPoint in combination with SuperGlue, a keypoint matching technique based on graph neural...
conference paper 2023
document
Xu, Jie (author), Hendriks, M.A.N. (author), Rots, J.G. (author), Tsouvalas, A. (author)
Due to the accompanying severe consequences of explosions, the blast puts a great threat to public security. Nonlinear finite element analysis is a possible method for civil engineers to check the integrity of the structures under blast loading without underestimating the limit of the structures. However, different choices of element types...
conference paper 2023
document
Ibrahim, M.S. (author), Poliotti, M. (author), Yang, Y. (author), Hendriks, M.A.N. (author)
Typically precast girders are designed and utilized as simple supported members. Alternatively, the precast girders can be made continuous at the intermediate support using cast-in-place concrete topping. Once the girders are made continuous, time-dependent restraint moments will occur. The magnitude of the restraint moment is mainly affected by...
conference paper 2023
document
Pressmair, Nadine (author), Xia, Yi (author), Wu, Hongfei (author), Langelaar, Matthijs (author), Hendriks, M.A.N. (author), Majdouba, Ahmad (author), Mogra, Mihir (author), Grisaro, Hezi (author), Amir, Oded (author), Kromoser, Benjamin (author)
Concrete, as the most widely used construction material, is associated with a high environmental impact. Within the present study, structural optimization is the method of choice to counter this issue. The entire process, from optimization, to design, experiments and numerical simulation is outlined. Embedded in the framework of a design...
journal article 2023
document
Talgorn, E.C.V. (author), Hendriks, Monique (author), Geurts, Luc (author), Bakker, C.A. (author)
Successful implementation of sustainable innovation requires strong collaborative ecosys-tems. In particular, collaboration between scientific and people-centered expertise (e.g., designers) is essential to bring technical innovation through contextualized, meaningful and attractive experiences. However, in practice, these types of expertise...
journal article 2022
document
Phusakulkajorn, W. (author), Hendriks, J.M. (author), Moraal, J. (author), Dollevoet, R.P.B.J. (author), Li, Z. (author), Nunez, Alfredo (author)
In this paper, a fuzzy interval-based method is proposed for solving the problem of rail defect detection relying on an on-board measurement system and a multiple spiking neural network architecture. Instead of outputting binary values (defect or not defect), all data will belong to both classes with different spreads that are given by two fuzzy...
conference paper 2022
document
Li, C. (author), Martinez, Jorge (author), Hendriks, R.C. (author)
Many multi-microphone algorithms depend on knowing the relative acoustic transfer functions (RTFs) of the individual sound sources in the acoustic scene. However, accurate joint RTF estimation for multiple sources is a challenging problem. Existing methods to jointly estimate the RTF for multiple sources have either no satisfying performance, or...
conference paper 2022
document
Van der Werf, I. (author), Martinez-Nuevo, Pablo (author), Møller, Martin Bo (author), Hendriks, R.C. (author), Martinez, Jorge (author)
The sound field in a room can be represented by a weighted sum of room modes. To estimate the room modes, current literature uses on-the-grid, sparse reconstruction methods. However, these on-the-grid methods are known to suffer from basis mismatch. In this work, we investigate the use of a gridless framework for estimating room modes using...
conference paper 2022
document
Bahafid, Sara (author), Hendriks, M.A.N. (author), Jacobsen, Stefan (author), Geiker, Mette (author)
We simulate the glue-spall stress due to mechanical interactions between a frozen saline solution (brine-ice composite) and a non-air entrained concrete surface including the impact of the micro-structure of the frozen solution. The presence of brine channels at the ice/concrete interface was found to be a prerequisite to induce stress during...
journal article 2022
document
Xia, Yi (author), Langelaar, Matthijs (author), Hendriks, M.A.N. (author)
Strut-and-Tie modelling (STM) has been widely applied to design D-regions of reinforced concrete structures. For economic and environmental reasons there is a need for optimized Strut-and-Tie models. How to optimize Strut-and-Tie models considering multiple load combinations has not been investigated extensively in the literature. In order to...
journal article 2022
document
Azizian Amiri, S. (author), van Berckel, Pieter (author), Lai, Marco (author), Dankelman, J. (author), Hendriks, B.H.W. (author)
Emerging intraoperative tumor margin assessment techniques require the development of more complex and reliable organ phantoms to assess the performance of the technique before its translation into the clinic. In this work, electrically conductive tissue-mimicking materials (TMMs) based on fat, water and agar/gelatin were produced with...
journal article 2022
document
Roosen, M.A. (author), Yang, Y. (author), van der Veen, C. (author), Schaafsma, Dick G. (author), Hendriks, M.A.N. (author)
When the shear resistance of prestressed beams with stirrups is determined with the current Eurocode, no distinction is made between regions with and without flexural cracks. This while it may be expected that a region without flexural cracks will have a higher shear resistance. This is due to the lower longitudinal strains and the narrow...
journal article 2022
document
Losch, M.S. (author), Kardux, Famke (author), Dankelman, J. (author), Hendriks, B.H.W. (author)
Introduction: Steering light is relevant to many medical applications that require tissue illumination, sensing, or modification. To control the propagation direction of light beams, a great variety of innovative fiber-optic medical devices have been designed. Areas covered: This review provides a comprehensive overview of the patent...
review 2022
document
Sun, M. (author), de Groot, N.M.S. (author), Hendriks, R.C. (author)
Mathematical models of the electrophysiology of cardiac tissue play an important role when studying heart rhythm disorders like atrial fibrillation. Model parameters such as conductivity, activation time, and anisotropy ratio are useful parameters to determine the arrhythmogenic substrate that causes abnormalities in the atrial tissue....
journal article 2022
document
Jadwiga Osmolska, Magdalena (author), Kanstad, Terje (author), Hendriks, M.A.N. (author), Markeset, Gro (author)
Corrosion and shear cracking are frequently observed near supports of pretensioned bridge girders in coastal climates, so non-linear finite element analysis was used to study the effect of corrosion on shear performance in a real case study. Varying degrees of corrosion and various locations (top strands, bottom strands, vertical stirrups and...
journal article 2022
document
Perez, S.M. (author), van de Berg, N.J. (author), Manni, Francesca (author), Lai, Marco (author), Rijstenberg, Lucia (author), Hendriks, B.H.W. (author), Dankelman, J. (author), Ewing-Graham, Patricia C. (author), Nieuwenhuyzen, G.M. (author), Van Beekhuizen, Heleen J. (author)
The most important prognostic factor for the survival of advanced-stage epithelial ovarian cancer (EOC) is the completeness of cytoreductive surgery (CRS). Therefore, an intraoperative technique to detect microscopic tumors would be of great value. The aim of this pilot study is to assess the feasibility of near-infrared hyperspectral imaging ...
journal article 2022
Searched for: +
(21 - 40 of 302)

Pages