- document
-
Dong, J. (author), Lin, P. (author), Putra, N.E. (author), Tümer, N. (author), Leeflang, M.A. (author), Huan, Z. (author), Fratila-Apachitei, E.L. (author), Chang, J. (author), Zadpoor, A.A. (author), Zhou, J. (author)The treatment of femoral nonunion with large segmental bone defect is still challenging. Although magnesium alloys have been considered potential materials for such a treatment, their application is limited by their fast degradation. Adding bioceramic particles into magnesium to form Mg-matrix composites is a promising strategy to adjust...journal article 2022
- document
-
San, H. (author), Paresoglou, M. (author), Minneboo, M.B. (author), van Hengel, I.A.J. (author), Yilmaz, A. (author), Gonzalez Garcia, Y. (author), Fluit, Ad C. (author), Hagedoorn, P.L. (author), Fratila-Apachitei, E.L. (author), Apachitei, I. (author), Zadpoor, A.A. (author)Nanoparticles (NPs) have high multifunctional potential to simultaneously enhance implant osseointegration and prevent infections caused by antibiotic-resistant bacteria. Here, we present the first report on using plasma electrolytic oxidation (PEO) to incorporate different combinations of reduced graphene oxide (rGO) and silver (Ag) NPs on...journal article 2022
- document
-
Bolanos Arriola, J. (author), van Oudheusden, A.A. (author), Flipsen, Bas (author), Faludi, Jeremy (author)This guide takes the reader through the 3D Printing for Repair (3DP4R) process. It consists of guidelines and tools to create a 3D printable version of spare parts needed for a product repair. 3D printing a spare part is more than just printing the original part. Instead, it is an iterative process in which the part is analysed, redesigned,...book 2022
- document
-
Wan, Z. (author), Xu, Y. (author), Zhang, Y. (author), He, S. (author), Šavija, B. (author)Cracking is one of the main causes for deterioration of concrete structures. Self-healing concrete with 3D-printed vascular networks has excellent potential for autonomous self-healing. This approach is scarcely investigated: no studies have been devoted to the influence of printing parameters on the properties of vascular based self-healing...journal article 2022
- document
-
Tissen, L.N.M. (author), van Veldhuizen, Mané (author)Various types of digital and physical three-dimensional facsimile technologies (e.g., high-definition digital modelling and 3D printing) have entered the art world and have become increasingly important for research and presentation purposes. Yet, studies that go beyond the technical aspects of (3D) facsimile techniques, such as their...journal article 2022
- document
-
Hedayati, R. (author), Yousefi, Armin (author), Bodaghi, Mahdi (author)With dramatic increase in 3D printing applications in industry, sandwich panels with 3D printed cores have gained a lot of attention recently. In harmony with global movement towards sustainability and low-carbon emission industries, sandwich panels with easy-to-repair and cost-effective cores would be very attractive structures. In this...journal article 2022
- document
-
Kalisvaart, Gijsbert M. (author), van Velden, Floris H.P. (author), Hernández-Girón, Irene (author), Meijer, Karin M. (author), Ghesquiere-Dierickx, Laura M.H. (author), Brink, Wyger M. (author), Webb, A. (author), de Geus-Oei, Lioe-Fee (author), Slump, Cornelis H. (author), Kuznetsov, D.V. (author), Schaart, D.R. (author), Grootjans, Willem (author)Background: Accuracy and precision assessment in radiomic features is important for the determination of their potential to characterize cancer lesions. In this regard, simulation of different imaging conditions using specialized phantoms is increasingly being investigated. In this study, the design and evaluation of a modular multimodality...journal article 2022
- document
-
O’Brien, Lisa (author), Montesano, Elena (author), Chadwell, Alix (author), Kenney, Laurence (author), Smit, G. (author)(1) Background: This study investigated the feasibility of conducting a two-week “real-world” trial of the Self Grasping Hand (SGH), a novel 3D printed passive adjustable prosthesis for hand absence; (2) Methods: Single-group pilot study of nine adults with trans-radial limb absence; five used body-powered split-hooks, and four had passive...journal article 2022
- document
-
Mustapha, K. A. (author), Shikh Anuar, F. (author), Mohd Sa’at, F. A.Z. (author), Zini, N. H.M. (author), Mat Tokit, E. (author), Satishwara Rao, N. (author), Hooman, K. (author), Abdi, Iman Ashtiani (author)In this study, 3D printed open-cell foam were produced and reconstructed from open-cell metal foam structure using a tomography scanning method and two different additive manufacturing technologies. The materials used in the 3D printing were nylon powder and plastic acid. The porous morphology and surface finish of the 3D printed foams were...conference paper 2022
- document
-
Cruz Saldivar, M. (author), Doubrovski, E.L. (author), Mirzaali, Mohammad J. (author), Zadpoor, A.A. (author)Bio-inspired composites are a great promise for mimicking the extraordinary and highly efficient properties of natural materials. Recent developments in voxel-by-voxel 3D printing have enabled extreme levels of control over the material deposition, yielding complex micro-architected materials. However, design complexity, very large degrees of...journal article 2022
- document
-
Hussain, M.Z. (author), Großmann, Paula F. (author), Kohler, Fabian (author), Kratky, Tim (author), Kronthaler, Laura (author), van der Linden, B. (author), Rodewald, Katia (author), Rieger, Bernhard (author), Fischer, Roland A. (author), Xia, Yongde (author)Direct ink writing technique is used to 3D print Ti-metal–organic framework (MOF) NH<sub>2</sub>-MIL-125 mixed with boehmite dispersal. Pt is also deposited onto 3D-printed monolith using atomic layer deposition (ALD) to offer additional catalytic sites. The Ti-MOF-derived powder sample and the pyrolyzed 3D-printed monolith samples are...journal article 2022
- document
-
van de Ven, Rick (author)The research described in this thesis explores the field of 3D printing technologies in the fabrication of printed, flexible tactile sensors and explores new possibilities and opportunities in the fabrication. The research is aiming at new ways of applying 3D printing fabrication techniques to develop easily applicable sensing structures to...master thesis 2021
- document
-
Burema, Arine (author)Introduction: Amputees still experience problems with the use of their upper limb prostheses, mainly in the lack of comfort and functionality. This results in rejection of the prosthesis or overuse injuries due to compensatory movements. The comfort and functionality should be improved by reducing weight and increasing the degrees of freedom....master thesis 2021
- document
-
Rao, Akshay (author)The master thesis project explores the spare parts business due to the evidence available on how well it contributes to the revenues and profits of firms. With increasing product variety, shorter product lifecycles and market competition, it is necessary for firms to supply spare parts to customers for keeping the products functional....master thesis 2021
- document
-
Chung, Jeeyong (author)Background: Wrist immobilization orthosis is a commonly adopted treatment method for wrist regarding pathologies. In recent years, a group of 3D-printed immobilization orthosis for the upper extremity has been proposed. However, they were mainly developed as substitutes for traditional casts for the upper extremity for short-term usage. There...master thesis 2021
- document
-
Butrimavicius, Karolis (author)In a bid to increase additive manufacturing (AM) technology readiness, this study researched feasibility of AM technology application in the next generation secondary flight control systems. Taking a state-of-the-art certification framework and technology into account, a selection tool was created and used to survey the high lift and thrust...master thesis 2021
- document
-
Wu, Zixia (author)This research focuses on developing architected lightweight cementitious cellular composites (LCCCs) for potential thermal insulation purposes. Specifically, Voronoi cellular structures with different randomness are adopted and used as cellular structure of the LCCCs. the mechanical properties of the developed LCCCs are investigated by...master thesis 2021
- document
-
Luesutthiviboon, S. (author), Ragni, D. (author), Avallone, F. (author), Snellen, M. (author)This study focuses upon a new permeable topology design concept as an alternative to porous metal foams, for turbulent boundary layer trailing-edge (TBL-TE) noise attenuation. The present permeable topology has unconventional characteristics with respect to the metal foams: a combination of low flow resistivity r and high form drag...journal article 2021
- document
-
Xu, Y. (author), Šavija, B. (author)Conventionally, the properties of cementitious materials are tailored by a simple but efficient method: mixture proportion design. For a given cementitious mixture, the chemical and physical properties of cementitious materials have already been determined. Consequently, the mechanical performance of the hardened cementitious material is...journal article 2021
- document
-
Tissen, L.N.M. (author)This article uses the COVID –19 crisis to re –evaluate the importance of reproductions – 3D prints – for art’s authenticity, and their significance in keeping art museums meaningful in a rapidly changing world. The fixation on ‘auratic experiences’, inherent to artworks’ materiality is integral to contemporary art theory and museum practice,...journal article 2021