Guest Editorial: Operational and structural resilience of power grids with high penetration of renewables

The switch to renewable power generation is promoted aggressively by government policies, growing investments, consumer preferences, and many other factors. However, high renewable penetration can impose significant challenges to designing and employing measures that enhance power grid resilience. Resilience has been posed as a requirement of...

Supplementary control based on current source coupling for improving dynamic characteristics of active distribution network

Supplementary control (SC) technology is widely leveraged by power supply companies in active distribution networks (ADNs) to improve their stability and dynamic characteristics. Yet, the existed SCs are generally implemented from inside the converter controllers of distributed generators (DGs) or active loads, so there is a need to redesign...

New innovations in pavement materials and engineering: A review on pavement engineering research 2021

Sustainable and resilient pavement infrastructure is critical for current economic and environmental challenges. In the past 10 years, the pavement infrastructure strongly supports the rapid development of the global social economy. New theories, new methods, new technologies and new materials related to pavement engineering are emerging....

Fan-Out Panel-Level PCB-Embedded SiC Power MOSFETs Packaging

In this article, a novel fan-out panel-level printed circuit board (PCB)-embedded package for phase-leg silicon carbide (SiC) metal-oxide-semiconductor field-effect transistor (MOSFET) power module is presented. Electro-thermo-mechanical co-design was conducted, and the maximum package parasitic inductance was found to be about 1.24 nH at 100...

Inverted pyramidally-textured PDMS antireflective foils for perovskite/silicon tandem solar cells with flat top cell

Perovskite/silicon tandem solar cells (TSCs) have the potential to achieve power conversion efficiency exceeding 30%. To be compatible with high-efficiency solution-deposited perovskite top cell, a planar front surface for silicon bottom cell is generally required. However, flat front surfaces result in large light reflection losses and thus...

Boron doping induced thermal conductivity enhancement of water-based 3C-Si(B)C nanofluids

In this paper, the fabrication and thermal conductivity (TC) of water-based nanofluids using boron (B)-doped SiC as dispersions are reported. Doping B into the <i>β</i>-SiC phase leads to the shrinkage of the SiC lattice due to the substitution of Si atoms (0.134 nm radius) by smaller B atoms (0.095 nm radius). The presence of B in the SiC...

Synthesis of Al₄SiC₄ powders via carbothermic reduction: Reaction and grain growth mechanisms

Highly pure Al₄SiC₄ powders were prepared by carbothermic reduction at 2173 K using Al₂O₃, SiO₂, and graphite as raw materials. The obtained Al₄SiC₄ powders owned hexagonal plate-like grains with a diameter of about 200–300 μm and a thickness of about 2–6 μm. Based...

Luminescence of Ce3+ at two different sites in ?-Sr2P2O7 under vacuum ultraviolet-UV and x-ray excitation

A series of Ce3+ doped ?-Sr2?2xCexNaxP2O7 phosphor compounds has been prepared using a high-temperature solid-state reaction technique. The luminescence properties under vacuum ultraviolet-UV and x-ray excitation were studied. Luminescence spectra reveal three UV-emitting peaks at about 310, 330, and 350 nm from which we conclude that Ce3+...