Searched for: +
(1 - 20 of 181)

Pages

document
Bauer, Florian (author), Drexler, Christoph (author), Frirdich, André (author), Isensee, Maximilian (author), Willinger, Lukas (author), Córdova, Jorge (author), Campagnolo, Filippo (author)
conference paper 2024
document
van der Sande, Robin (author), Deshmukh, R.S. (author), Shekhar, A. (author), Bauer, P. (author)
When operating a modular multilevel converter (MMC), a margin appears between the arm voltage and sum capacitor voltage corresponding to the power dependent ripple. This margin can be used to enhance the DC link voltage and increase the transfer capacity of an MMC-based distribution link while keeping the submodule (SM) stresses fixed....
conference paper 2023
document
Damianakis, Nikolaos (author), Chandra Mouli, G.R. (author), Bauer, P. (author)
An important aspect of the energy transition is the expected grid impact due to the abrupt increase of distributed electric generation and electric load demand. A part of this impact is going to be inflicted by the electrification of heating with heat pumps (HPs). Therefore, it is essential that the future power consumption of electric...
conference paper 2023
document
Ahmadi, M. (author), Shekhar, A. (author), Bauer, P. (author)
Power electronics converters are crucial for power generation, transmission, and distribution. The modular multilevel converter (MMC) is highly valued for its ability to handle high power levels, versatility in reconfiguration, high efficiency through small-capacity submodules (SMs), and robust control capabilities. A failure of a power...
conference paper 2023
document
Molenaar, M. (author), Kardan Halvaei, F. (author), Shekhar, A. (author), Bauer, P. (author)
The reliability of semiconductor power devices can be studied by performing a thermal and power cycling test. In order to create the desired temperature cycles, there are four free variables to select during the power cycling test, namely the heating current, heating time, cooling time, and heatsink temperature. In this paper, the relation...
conference paper 2023
document
Yu, G. (author), Ye, P. (author), Grazian, F. (author), Dong, J. (author), Soeiro, Thiago B. (author), Bauer, P. (author)
The pursuit of battery charging technology for electric vehicle (EV) has led to extensive research on the inductive-based wireless power transfer (WPT) systems. In this paper, the compensation component (including coils) stresses will be studied in two commonly adopted compensation topologies, namely S-S and LCC-S compensations. Due to the peak...
conference paper 2023
document
Kardan Halvaei, F. (author), Ahmadi, M. (author), Shekhar, A. (author), Bauer, P. (author)
EV Fast chargers are crucial to alleviate the driving range anxiety for E-mobility applications. A typical converter load profile consists of a short high-current pulse to rapidly refill the EV battery followed by a cooling-off period once the charging is completed. Power electronic components experience thermal cycles as a result, which can...
conference paper 2023
document
Wu, Y. (author), Qin, Z. (author), Soeiro, Thiago B. (author), Bauer, P. (author)
With the great emphasis from the international standard-setting community on the so-called supra-harmonics emissions (2-150 kHz), there are increasing research efforts in this noise level identification, measurement, standard setting and mitigation. The periodic variable switching frequency PWM method, which is known as VSFPWM, can reshape the...
conference paper 2023
document
Shekhar, A. (author), Rituraj, G. (author), van der Sande, Robin (author), Ahmadi, M. (author), Deshmukh, R.S. (author), Bauer, P. (author), Nougain, V. (author), Lekić, A. (author), Palensky, P. (author)
Reliable Power Electronic Systems (PES) are vital for enabling energy transition technologies of the future. Power hardware-in-the-Loop (PHIL) test bed can be used to validate such systems cost-effectively and time-efficiently. In general, the Real Time Digital Twin (RTDT) is a virtual representation of the PES and its operating environment that...
conference paper 2023
document
Xiao, J. (author), Wang, L. (author), Qin, Z. (author), Bauer, P. (author)
This paper proposes a virtual impedance reshaping strategy to share active and harmonic power while promoting the PCC voltage quality. Moreover, the suggested method is resilient to cyber-attacks and immune to communication interruption and delay. Furthermore, it significantly reduces the communication burden. Experiments verify the...
conference paper 2023
document
Slaifstein, D.A. (author), Alpizar Castillo, J.J. (author), Menendez Agudin, A. (author), Ramirez Elizondo, L.M. (author), Chandra Mouli, G.R. (author), Bauer, P. (author)
In the context of building electrification the operation of distributed energy resources integrating multiple energy carriers poses a significant challenge. Such an operation calls for an energy management system that decides the set-points of the primary control layer in the best way possible. This is done by fulfilling user requirements,...
conference paper 2023
document
Kouwerberg, Sang Jae (author), Alpizar Castillo, J.J. (author), Ramirez Elizondo, L.M. (author), Bauer, P. (author)
Batteries are one of the main tools to provide the flexibility distribution and transmission systems need due to their increasing dependence on weather conditions. However, environmental and economic factors pose a significant problem. New types of batteries that do not rely on rare earth metals and organic solvents but instead use water and...
conference paper 2023
document
Alpizar Castillo, J.J. (author), Ramirez Elizondo, L.M. (author), Bauer, P. (author)
The energy transition requires electrical alternatives for domestic heating. Heat pumps are the most common alternatives to gas boilers. However, heat pumps consume a significant amount of electrical power. We simulated an 18-node low voltage network with five buildings with six apartments each to evaluate the effect of deploying heat pumps as...
conference paper 2023
document
Diab, I. (author), Chandra Mouli, G.R. (author), Bauer, P. (author)
A typical approach to harvesting the excess braking energy of a railway car has been to use a storage system. However, research momentum has been growing in the direction of integrating smart loads like EV chargers into traction networks, and this can offer a more efficient and economical solution to the harvesting of braking energy. This paper...
conference paper 2023
document
Xiao, J. (author), Wang, L. (author), Qin, Z. (author), Bauer, P. (author)
In multi-inverter parallel connected islanded micro-grids, reactive power sharing is challenged by the differences in feeder impedance and various controller parameters. In order to address this issue, a virtual impedance reshaping strategy based on the consensus algorithm is proposed in this paper. The proposed method facilitates adaptive...
conference paper 2023
document
Wu, Y. (author), Qin, Z. (author), Soeiro, Thiago B. (author), Bauer, P. (author)
The sinusoidal Triangular-Current-Mode (S-TCM) method has been proposed in the AC/DC power-factor-correction (PFC) converter to achieve the zero-voltage-switching (ZVS) which can lead to both, high efficiency operation and a high power density design. Nevertheless, the necessary wide range variation of the sinusoidal switching frequency...
conference paper 2023
document
Li, Z. (author), Qin, Z. (author), Mirzadarani, R. (author), Ghaffarian Niasar, M. (author), Itraj, M.S. (author), Van Lieshout, Lou (author), Bauer, P. (author)
For electrolyzer applications, traditional solutions using line frequency transformers plus rectifiers are bulky, heavy and have low controllability. The Solid State Transformer (SST) could be a promising solution to solve the mentioned issues. This paper compares the semiconductor ratings and capacitance of five different Modular Multilevel...
conference paper 2023
document
Lyu, D. (author), Straathof, C.A. (author), Soeiro, Thiago B. (author), Qin, Z. (author), Bauer, P. (author)
A variable switching frequency modulation for the Dual Active Bridge (DAB) converter is proposed in this paper. With this variable switching frequency modulation, the DAB converter can be operated in the ZVS-beneficial operational modes without the necessity to transition to others, thus a larger ZVS range for the DAB converter can be...
conference paper 2023
document
Menendez Agudin, A. (author), Jaikumar, Kalpesh (author), Chandra Mouli, G.R. (author), Slaifstein, D.A. (author), Pool, Jeroen (author), Bauer, P. (author)
This paper presents a Mix Integer Linear Programming (MILP) optimization approach to reduce peak demand and maximize revenue in a grid-connected building with a PV-equipped charging station for Shared EVs. The study investigates the impact of EV availability on the effectiveness of the system by comparing the results for different connection...
conference paper 2023
document
Wang, L. (author), Qin, Z. (author), Xiao, J. (author), Bauer, P. (author)
The critical short circuit ratio (CSCR), as an important metric for grid stability evaluation, is not clearly defined in the literature. Aimed at clarifying the misunderstandings, the paper compares the different CSCR definitions. Moreover, CSCR reduction-oriented design is studied for electric vehicle chargers. Simulations verify the analysis.
conference paper 2023
Searched for: +
(1 - 20 of 181)

Pages