Searched for: +
(25,341 - 25,360 of 47,103)

Pages

document
Liu, Mengdi (author)
This thesis proposes a low-cost and small size customized data acquisition sensor badge, called Easy ID, which is specially designed for the Vision Lab Group in TU Delft for their on body data capture during social events. Easy ID is designed based on an open source platform, which provides enough space for future upgrade and extension.<br/>The...
master thesis 2017
document
Xu, Boliang (author)
Packet communication applications cannot guarantee correct delivery of every packet. Congestions and interferences in the network lead to lost packets. However, real-time applications require timely delivery of data or information and always tolerate packet loss to achieve this aim. When some speech packets are lost, packet loss concealment (PLC...
master thesis 2017
document
Bagani, Rishab (author)
master thesis 2017
document
Jerez Venegas, Marcos (author)
Airborne wind energy is a new research field that aims to harvest winds at high altitudes. The pumping kite concept investigated at the Delft University of Technology is based on leading edge inflatable kites that divide a generation cycle into three phases: traction, retraction, and transition. This research project aims to optimise the...
master thesis 2017
document
Bruinsma, Quinten (author), Hill, Kevin (author), Hamburger, Rens (author)
For both security and analytics, much research has gone into person tracking already. As a result, many<br/>different state of the art technologies exist. However, in darkness or without a direct line of sight, much<br/>less technologies are capable of this. The choices become especially limited when the setup needs to<br/>be portable.<br/>A...
bachelor thesis 2017
document
van Schoubroeck, Joachim Kinley (author)
master thesis 2017
document
Ge, H. (author)
To improve the conversion efficiency of c-Si solar cells, it is crucial to quench the recombination losses at c-Si/metal interface. Such recombination losses are able to be reduced by using carrier-selective passivating contacts by means of hydrogenated amorphous silicon (a-Si:H) and poly-crystalline silicon (poly-Si)/tunneling silicon oxide ...
master thesis 2017
document
Soh Kae Ching, Kae Ching (author)
Incentive regulation has become challenging due to the increased information asymmetries and uncertainties driven by the diffusion of distributed energy resources (DER) and smart grid technologies. A combination of a Reference Network Model (RNM) and a menu of profit-sharing contracts has been used in this thesis to address these problems in...
master thesis 2017
document
Marelis, Arjan (author)
The effect of conductive heat transfer recharge originating from the surrounding conduction dominated geothermal system on the geothermal reservoir lifetime has been reviewed during its development, by studying the effect of multiple reservoir and production parameters. A two dimensional (2D) finite volume implicit coupling strategy, using a...
bachelor thesis 2017
document
Van den Broeck, Michael (author)
The use of Taylor Series Integration (TSI) for the propagation of spacecraft trajectories and its combination with the relatively unknown Unified State Model (USM) coordinate system, resulting in the TSI-USM propagator, is known to allow fast propagation of interplanetary low-thrust trajectories. Unfortunately, the TSI-USM propagator is a...
master thesis 2017
document
Stijnman, Peter (author)
Electrical properties tomography is the quantification of the conductivity and permittivity of different materials. In an MRI setting this can be used to map the electrical properties of tissue. These values can be used as a different contrast mechanism, for hyperthermia treatment or the improvement of antenna design for specific applications....
master thesis 2017
document
Galnares de la Garza, F.O. (author)
In this work, gas phase toluene was degraded as model contaminant in an annular LED-based photocatalytic reactor under various light irradiance and illumination modes as a means to enhance the efficiency in illumination. The effect of controlled periodic illumination was first studied by exploring the effect of the duty cycle and the period and...
master thesis 2017
document
van der Hoeven, Jelmer (author), Coesoij, Richard (author)
The Zebro is a six legged autonomous robot, designed to be deployed in swarms. Charging the battery is still done manually. To further increase the autonomous abilities of the Zebro, a wireless charging station and module is designed. The charging station is fully modular and interconnected by charging pads. This opens the possibility of...
bachelor thesis 2017
document
kunst, David (author)
Areas are getting more and more populated causing new infrastructure lines to be constructed below the surface. A bored tunnel is one of the possibilities to create this subsurface infrastructure, but the construction process of a bored tunnel is a complicated one. Many loads and aspects are present in this construction process that can be...
master thesis 2017
document
Wang, T. (author)
Demand driven building energy management system has gained significant interest in recent years. In order to provide insights for the demand driven building heating energy management at IDE building, TU Delft, this research develops an approach to access real time occupancy information by applying supervised machine learning (ML) classification...
master thesis 2017
document
Wasim, A.M.K.K. (author)
For μCHP applications, micro gas turbines offer many potential advantages in comparison to other conver- sion technologies due to their compact size and high specific power, low vibration and noise, low mainte- nance requirements, low emissions and high-grade residual thermal energy. Optimisation of MTT compressor with a vaneless diffuser (OCVLD...
master thesis 2017
document
Merino Madrid, Cristian (author)
Prediction of emissions from combustion systems is a complex problem involving the coupling between the flow field and chemistry. CFD analysis is the most commonly employed approach. However, it has the drawback that a very high computational cost prevents the use of detailed chemistry models. This master thesis, which focuses on NOx emissions,...
master thesis 2017
document
Lin, Pei-Chiang (author)
The aim of this project is to improve passengers’ experience regarding boarding and alighting by designing the rear entrance and its vicinity. Based on the findings from literature researches on product experience and comfort, a series of extensive passenger researches were performed to explore passengers’ needs and wants of different levels....
master thesis 2017
document
Berckmoes, Dennis (author)
X-core is a novel foam core material developed by Donkervoort Automobielen, it enables a unique one-shot process for seamless composite sandwich structures with mould-defined features all-around. The foam is co-cured to carbon fibre/epoxy prepregs, in this form the process is currently used to make car components for the Donkervoort D8 GTO RS....
master thesis 2017
document
Güroğlu, Duygu (author)
Designing a bus seat with an increased comfort perception for the passengers with regards to physical and cognitive aspects was the assignment for my graduation project at the TU Delft executed in collaboration with VDL Bus &amp; Coach.
master thesis 2017
Searched for: +
(25,341 - 25,360 of 47,103)

Pages