Searched for: +
(21 - 40 of 137)

Pages

document
Sun, Lingqi (author), Chen, K. (author), Geng, Peng (author), Zhou, Yan (author), Wen, Shifeng (author), Shi, Yusheng (author)
Porous NiTi lattice structures are widely used in the manufacture of crucial components owing to their excellent shape memory effect, superelasticity, and high damping capacities. However, the specific strength and lightweight characteristics of porous NiTi lattice structures fabricated by conventional technologies are limited by...
journal article 2023
document
Zhang, Xinqi (author), Shi, Jihao (author), Huang, Xinyan (author), Xiao, Fu (author), Yang, M. (author), Huang, Jiawei (author), Yin, Xiaokang (author), Sohail Usmani, Asif (author), Chen, Guoming (author)
Deep learning has been widely applied to automated leakage detection and location of natural gas pipe networks. Prevalent deep learning approaches do not consider the spatial dependency of sensors, which limits leakage detection performance. Graph deep learning is a promising alternative to prevailing approaches as it can model spatial...
journal article 2023
document
Shi, Weibo (author), Niu, Dongyu (author), Li, Z. (author), Niu, Yanhui (author)
The surface texture of asphalt pavement has a significant effect on skid resistance performance. However, its contribution to the performance of skid resistance is non-homogeneous and subjects to local validity. There are also a few deep learning models that take into account the effective contact texture region. This paper proposes a...
journal article 2023
document
Niu, D. (author), Shi, Weibo (author), Wang, C. (author), Xie, Xiwang (author), Niu, Yanhui (author)
Optimizing asphalt mix design at the indoor stage is of significant importance for enhancing the rutting resistance of asphalt mixture, which is affected by its structural characteristics. In this work, the coordination number of particle contact force (CN<sub>pcf</sub>) was proposed as an indicator to represent contact characteristics of...
journal article 2023
document
Shi, Baocun (author), Liu, Quan (author), Gao, Y. (author), Wu, Jiantao (author), Chen, Jingya (author)
The occurrence of cohesive/adhesive hybrid failure at the bitumen-aggregate interface is widely acknowledged, however, the quantitative evaluation of the cohesion/adhesion proportion is relatively weak. This study explored cohesive/adhesive hybrid failure and provided a quantitative analysis of the proportion between cohesion and adhesion....
journal article 2023
document
Shi, Rui (author), Wüthrich, D. (author), Chanson, Hubert (author)
journal article 2023
document
Shi, Z. (author), Su, Qingtian (author), Kavoura, Dr. Florentia (author), Veljkovic, M. (author)
To investigate the fatigue performance and fatigue damage process of the Orthotropic Steel Deck (OSD) - Ultra-High Performance Concrete (UHPC) composite bridge deck, a two-span continuous full-scale specimen was designed and tested under cyclic loading. Test results showed that the fatigue cracks firstly initiated near the lower part of the weld...
journal article 2023
document
Shi, X. (author), Pumm, Anna Katharina (author), Maffeo, Christopher (author), Kohler, Fabian (author), Feigl, Elija (author), Zhao, W. (author), Verschueren, D.V. (author), Golestanian, Ramin (author), Aksimentiev, Aleksei (author), Dietz, Hendrik (author), Dekker, C. (author)
Rotary motors play key roles in energy transduction, from macroscale windmills to nanoscale turbines such as ATP synthase in cells. Despite our abilities to construct engines at many scales, developing functional synthetic turbines at the nanoscale has remained challenging. Here, we experimentally demonstrate rationally designed nanoscale DNA...
journal article 2023
document
Wüthrich, D. (author), Shi, Rui (author), Chanson, Hubert (author)
journal article 2023
document
Liu, Zhengke (author), Ma, Xiaolei (author), Liu, Xiaohan (author), Correia, Gonçalo (author), Shi, Ruifeng (author), Shang, Wenlong (author)
Optimizing battery swapping station (BSS) configuration is essential to enhance BSS’s energy savings and economic feasibility, thereby facilitating energy refueling efficiency of electric taxis (ETs). This study proposes a novel modular battery swapping mode (BSM) that allows ET drivers to choose the number of battery blocks to rent according...
journal article 2023
document
Cheng, Gang (author), Wu, S. (author), Shi, M. (author), Dong, W. (author), Zhu, H. (author), Alonso-Mora, J. (author)
Autonomous navigation of Micro Aerial Vehicles (MAVs) in dynamic and unknown environments is a complex and challenging task. Current works rely on assumptions to solve the problem. The MAV's pose is precisely known, the dynamic obstacles can be explicitly segmented from static ones, their number is known and fixed, or they can be modeled with...
journal article 2023
document
Wang, Xiangyang (author), Shi, Chen (author), Hao, Xiaodi (author), van Loosdrecht, Mark C.M. (author), Wu, Yuanyuan (author)
Wet-chemical approach is widely applied for phosphate recovery from incinerated ash of waste activated sludge (WAS), along with metals removed/recovered. The high contents of both aluminum (Al) and iron (Fe) in WAS-incinerated ash should be suitable for producing coagulants with some waste anions like Cl<sup>−</sup> and SO<sub>4</sub><sup>2−<...
journal article 2023
document
Shi, S. (author), Cheng, Xiaodong (author), Van den Hof, Paul M.J. (author)
Identifiability of a single module in a network of transfer functions is determined by whether a particular transfer function in the network can be uniquely distinguished within a network model set, on the basis of data. Whereas previous research has focused on the situations that all network signals are either excited or measured, we develop...
journal article 2023
document
Ma, Yuanxing (author), Shi, Baobin (author), Ali, Liaqat (author), Bai, Yong (author), Fang, P. (author)
Wire ropes are widely observed in many industries such as marine engineering and civil engineering, as a type of structure that can bear huge axial force. There are various kinds of wire ropes in practical engineering, corresponding to different usage scenarios. This paper focuses on 6 × 36SW + 1WR with a diameter of 16 mm. The axial...
journal article 2023
document
Shi, Rui (author), Wüthrich, D. (author), Chanson, Hubert (author)
Continuing from the part 1 (Shi et al., 2022) this paper presents an experimental investigation of transient void fraction and bubble statistics in a highly turbulent breaking bore with Fr<sub>1</sub>=2.4. The measurements were conducted using a combination of dual-tip phase-detection probes and an ultra-high-speed video camera. The enclosed...
journal article 2023
document
Shi, Rui (author), Wüthrich, D. (author), Chanson, Hubert (author)
Transient motion, turbulence and bubble dynamics make any velocity quantification extremely difficult in unsteady gas–liquid flows. In the present study, novel Eulerian and Lagrangian techniques of velocimetry were developed, using both intrusive and non-intrusive measurements. The selected unsteady gas–liquid flow was a breaking bore,...
journal article 2023
document
Guo, Lanpeng (author), Liang, Hongping (author), Hu, Huiyun (author), Shi, Shenbin (author), Wang, Chenxu (author), Li, Hao (author), Lee, Yi Kuen (author), French, P.J. (author), Wang, Yao (author)
Achieving convenient and accurate detection of indoor ppb-level formaldehyde is an urgent requirement to ensure a healthy working and living environment for people. Herein, ultrasmall In<sub>2</sub>O<sub>3</sub> nanorods and supramolecularly functionalized reduced graphene oxide are selected as hybrid components of visible-light-driven (VLD)...
journal article 2023
document
Arosquipa-Nina, Yvan (author), Shi, Rui (author), Wüthrich, D. (author), Chanson, Hubert (author)
journal article 2023
document
Lyu, X. (author), Negenborn, R.R. (author), Shi, Xiaoning (author), Schulte, F. (author)
Traditionally, terminal operators create an initial berthing plan before the arrival of incoming vessels. This plan involves decisions on when and where to load or discharge containers for the calling vessels. However, disruptive unforeseen events (i.e., arrival delays, equipment breakdowns, tides, or extreme weather) interfere with the...
journal article 2022
document
Zhang, Z. (author), Wu, Chenming (author), Dai, C. (author), Shi, Qingqing (author), Fang, G. (author), Xie, Dongfang (author), Zhao, Xiangjie (author), Liu, Yong Jin (author), Wang, C.C. (author), Wang, Xiu Jie (author)
Despite the recent advances in artificial tissue and organ engineering, how to generate large size viable and functional complex organs still remains as a grand challenge for regenerative medicine. Three-dimensional bioprinting has demonstrated its advantages as one of the major methods in fabricating simple tissues, yet it still faces...
journal article 2022
Searched for: +
(21 - 40 of 137)

Pages