- document
-
Liang, M. (author), Luzio, Giovanni Di (author), Schlangen, E. (author), Šavija, B. (author)This study presents comprehensive numerical modeling methods for simulating early-age stress (EAS) relaxation in cementitious materials, based on the autogenous deformation (AD), elastic modulus, creep, and stress continuously tested by a mini temperature stress testing machine (Mini-TSTM) and a mini AD testing machine from a very early age ...journal article 2024
- document
-
Wan, Z. (author), Xu, Y. (author), He, S. (author), Schlangen, E. (author), Šavija, B. (author)This paper presents a state-of-the-art review on the application of additive manufacturing (AM) in self-healing cementitious materials. AM has been utilized in self-healing cementitious materials in three ways: (1) concrete with 3D-printed capsules/vasculatures; (2) 3D concrete printing (3DCP) with fibers or supplementary cementitious...journal article 2024
- document
-
Ghaderiaram, A. (author), Mohammadi, R. (author), Schlangen, E. (author), Fotouhi, M. (author)Engineering structures, such as bridges, wind turbines, airplanes, ships, buildings, and offshore platforms, often experience uncertain dynamic loadings due to environmental factors and operational conditions. The lack of knowledge about the load spectrum for these structures poses challenges in terms of design and can lead to either over...journal article 2024
- document
-
Gan, Yidong (author), Liang, M. (author), Schlangen, E. (author), van Breugel, K. (author), Šavija, B. (author)This study employs a lattice fracture model to simulate static and fatigue fracture behaviour of Interfacial Transition Zone (ITZ) at microscale and mortar at mesoscale. The heterogeneous microstructure of ITZ and mesostructure of mortar are explicitly considered in the models. The initial step involves calibrating and validating the...journal article 2024
- document
-
França de Mendonça Filho, F. (author), de Vilder, L.H. (author), Schlangen, E. (author), Copuroglu, Oguzhan (author)Spalling is the main problem concerning safety in concrete structures under rapid heating. Despite being studied for nearly a century, its prediction remains a challenge. In addition, the main recommendations for its prevention are merely the addition of a fixed amount of polypropylene fibres, without accounting for mix design. This paper...journal article 2024
- document
-
He, S. (author), Nuri, Masi (author), Jonkers, H.M. (author), Lukovic, M. (author), Schlangen, E. (author)This study investigates the structural behaviour and self-healing performance of hybrid reinforced concrete (RC) beams, enhanced with a 1.5-cm-thick self-healing cover composed of bacteria-embedded strain hardening cementitious composite (SHCC), for its potential in crack width control and crack healing. The research focuses on the...journal article 2024
- document
-
Nedeljković, Marija (author), Tošić, Nikola (author), Schlangen, E. (author), Fennis, Sonja (author)Demand for high quality recycled concrete aggregates (RCA) to offset the use of primary materials is significantly rising due to circular economy goals and high-value reuse of concrete. The quality of RCA significantly affects their availability for new concrete production due to the variability of parent concrete streams. The optimization of...journal article 2023
- document
-
Awasthy, Nikhil (author), Schlangen, E. (author), Hordijk, Dick (author), Šavija, B. (author), Lukovic, M. (author)Concrete is characterized in terms of its engineering properties, mainly strength and stiffness, which are subsequently used in structural design. However, the apparent (i.e., measured) concrete properties are not intrinsic but dependent on the conditions under which the measurement is performed. Herein a combined experimental and numerical...journal article 2023
- document
-
Liang, M. (author), Liu, C. (author), Liang, X. (author), Chang, Z. (author), Schlangen, E. (author), Šavija, B. (author)This paper investigates the influence of temperature on autogenous deformation and early-age stress (EAS) evolution in ordinary Portland cement paste using a recently developed Mini Temperature Stress Testing Machine (Mini-TSTM) and Mini Autogenous Deformation Testing Machine (Mini-ADTM). In the Mini-TSTM/ ADTM, CEM I 42.5 N paste with a...journal article 2023
- document
-
Chen, Y. (author), Rahmani, Hossein (author), Schlangen, E. (author), Copuroglu, Oguzhan (author)The implementation of extrusion-based 3D concrete printing (3DCP) in large-scale constructions is currently limited by concerns regarding rheology control and the sustainability of this process. To address these issues, this study presents an approach to develop limestone-calcined clay-based cementitious (LC3) materials accelerated by Ca(NO...journal article 2023
- document
-
Nedeljković, Marija (author), Tošić, Nikola (author), Holthuizen, Patrick (author), França de Mendonça Filho, F. (author), Copuroglu, Oguzhan (author), Schlangen, E. (author), Fennis, Sonja (author)The utilization of locally available concrete waste for producing recycled concrete aggregates is recognized as one of the most sustainable ways of satisfying the growing demand for concrete production. However, the quality of concrete waste depends on its origin and it may significantly differ from one concrete structure to another. Knowing the...journal article 2023
- document
-
Qiu, Xiujiao (author), Chang, Z. (author), Chen, J. (author), Schlangen, E. (author), Ye, G. (author), Schutter, Geert De (author)In our former paper, based on a published 3D reactive transport model at microscale with the capability of simulating the chemical reactions involved in ASR, the location of expansive ASR gel related to the reactivity of aggregate, temperature, aggregate porosity and silica content in aggregate, is clarified. Based on the simulation results,...journal article 2023
- document
-
van Overmeir, A.L. (author), Šavija, B. (author), Bos, Freek P. (author), Schlangen, E. (author)Several studies have shown the potential of strain-hardening cementitious composites (SHCC) as a self-reinforcing printable mortar. However, papers published on the development of three-dimensional printable SHCC (3DP-SHCC) often report a discrepancy between the mechanical properties of the cast and printed specimens. This paper evaluates the...journal article 2023
- document
-
Liu, Qing feng (author), Shen, Xiao-han (author), Šavija, B. (author), Meng, Zhaozheng (author), Tsang, Daniel C.W. (author), Sepasgozar, Samad (author), Schlangen, E. (author)In circumstances with wastewater and seawater, the behavior of multi-ions including calcium, chloride and others in concrete attracts attention. The present study investigated the multiple mechanisms that could happen under the special field situation above, including calcium leaching, chloride transport and multi-ion coupling. To realize the...journal article 2023
- document
-
Lattice modelling of early-age creep of 3D printed segments with the consideration of stress historyChang, Z. (author), Liang, M. (author), He, S. (author), Schlangen, E. (author), Šavija, B. (author)We propose a new numerical method to analyze the early-age creep of 3D printed segments with the consideration of stress history. The integral creep strain evaluation formula is first expressed in a summation form using superposition principle. The experimentally derived creep compliance surface is then employed to calculate the creep strain...journal article 2023
- document
-
Chang, Z. (author), Liang, M. (author), Chen, Y. (author), Schlangen, E. (author), Šavija, B. (author)Cementitious materials may exhibit significant creep at very early age. This is potentially important for concrete 3D printing, where the material is progressively loaded even before it sets. However, does creep actually affect the buildability of 3D printed concrete? Herein, the influence of early-age creep on the buildability of 3D printed...journal article 2023
- document
-
Zhang, H. (author), Jin, Zuquan (author), Jiang, Nengdong (author), Ge, Zhi (author), Schlangen, E. (author), Ling, Yifeng (author), Šavija, B. (author), Wang, Zheng (author)The classically lattice model assumes the local elements behave elastic brittle, neglecting the ductility of the mortar matrix. This leads to the simulated load⁃displacement response more brittle than the realistic. To solve the aforementioned issue, a piece⁃wise approach was introduced to describe the elastic⁃plastic constitutive relation of...journal article 2023
- document
-
He, S. (author), Chen, Y. (author), Liang, M. (author), Yang, En-Hua (author), Schlangen, E. (author)This study investigates the microstructural changes of cement paste due to the inclusion of polymeric microfiber at different water-to-cement (w/c) ratios. A procedure to quantify the porosity of epoxy impregnated interfacial transition zone (ITZ) is also presented. Results show that the microstructures of the ITZ beneath and above a...journal article 2023
- document
-
Chen, Y. (author), Zhang, Y. (author), He, S. (author), Liang, X. (author), Schlangen, E. (author), Copuroglu, Oguzhan (author)In 3D concrete printing, fast structuration is a prerequisite for ideal buildability. This paper aims to study the impact of inorganic additives, i.e., CaCl<sub>2</sub> and gypsum, on structural build-up and very early-age hydration of limestone-calcined clay-cement (LC3) pastes within the first 70–80 min. Results show that, increasing the...journal article 2023
- document
-
He, S. (author), Mustafa, S. (author), Chang, Z. (author), Liang, M. (author), Schlangen, E. (author), Lukovic, M. (author)In the current study, experiments and numerical simulations were carried out to investigate the cracking behavior of reinforced concrete beams consisting of a very thin layer (i.e., 1 cm in thickness) of SHCC in the concrete cover, tension zone. A novel type of SHCC/concrete interface that features a weakened chemical adhesion but an enhanced...journal article 2023