Joint Inversion of Acoustic and Electromagnetic Wave fields

Imaging by inversion of acoustic or electromagnetic wave fields have applications in a wide variety of areas, such as non-destructive testing, biomedical applications, and geophysical exploration. Unfortunately, each modality suffers from its own application-specific limitations, typically being difficulties in distinguishing different...

Simulation of Radar Micro-Doppler Patterns for Multi-Propeller Drones

This paper presents a thin-wire electromagnetic (EM) model of multi-propeller drone that generates drone micro-Doppler pattern efficiently as a function of radar parameters and propeller properties. Experimental results of propeller micro-Doppler pattern measured in anechoic chamber was investigated and used to validate the results produced...

Electromagnetic Marchenko imaging in 1D for dissipative media

We present a one-dimensional lossless scheme to compute an image of a dissipative medium from two single-sided reflection responses. One reflection response is measured at or above the top reflector of a dissipative medium and the other reflection response is computed as if measured at or above the top reflector of a medium with negative...

Towards Seismoelectric Inversion: Sensitivity Analysis using Resolution Functions

Seismoelectric wave propagation modeling for typical laboratory configurations: A numerical validation

The seismoelectric effect can be of importance for hydrocarbon exploration as it is complementary to conventional seismics. Besides enabling seismic resolution and electromagnetic sensitivity at the same time, the seismoelectric method can also provide us with additional, high-value information like porosity and permeability. However, very...

Probing the solution space of an EM inversion problem with a genetic algorithm

In an inversion for the subsurface conductivity distribution using frequency-domain Controlled-Source Electromagnetic data, various amounts of horizontal components may be included. We investigate which combination of components are best suited to invert for a vertical transverse isotropic (VTI) subsurface. We do this by probing the...

Sensitivity of the near-surface vertical electric field land Controlled-Source Electromagnetic monitoring

We investigate potential benefits of measuring the vertical electric field component in addition to the routinely measured horizontal electric field components in onshore time-lapse controlled-source electromagnetics. Synthetic electromagnetic data based on a model of the Schoonebeek onshore oil field are used. We confirm that the vertical...

Validation of an electroseismic and seismoelectric modeling code, for layered earth models, by the explicit homogeneous space solutions

We have developed an analytically based, energy fluxnormalized numerical modeling code (ESSEMOD), capable of modeling the wave propagation of all existing ElectroSeismic and SeismoElectric source-receiver combinations in horizontally layered configurations. We compare the results of several of these modeled source-receiver combinations in a...

Coupled seismic and electromagnetic wave propagation

Coupled seismic and electromagnetic wave propagation is studied theoretically and experimentally. This coupling arises because of the electrochemical double layer, which exists along the solid-grain/fluid-electrolyte boundaries of porous media. Within the double layer, charge is redistributed, creating an excess electrical charge in the fluid...

Seismic and electromagnetic interferometry: Retrieval of the earth's reflection response using crosscorrelation

One of the goals of exploration geophysics is to obtain an image of the subsurface. In petroleum exploration and near-surface geophysics, this is best achieved using reflected waves. For this, a controlled seismic or electromagnetic source is placed at the surface, activated, and the wavefields that it creates are recorded at the surface after...

Actuator tests for a large deformable membrane mirror

In the design of a large adaptive deformable membrane mirror, variable reluctance actuators are used. These consist of a closed magnetic circuit in which a strong permanent magnet provides a static magnetic force on a ferromagnetic core which is suspended in a membrane. By applying a current through the coil which is situated around the magnet,...