Surface Crack Growth in Metallic Pipes Reinforced with Composite Repair System

Surface cracks are serious threats to the structural integrity of offshore metallic pipes. This dissertation proposes a protocol of composite reinforcement on surface cracked metallic pipes subjected to cyclic loads, aiming to decrease the crack growth rate and prolong the residual fatigue life. The main objective of this dissertation is to...

Co-cure joining of epoxy composites with rapidly UV-irradiated PEEK and PPS composites to achieve high structural integrity

Efficient joining of hybrid thermoset/thermoplastic composite joints is critical to produce high performance lightweight structures while keeping the cost low. Herein, a high-power UV-irradiation technique was proposed to rapidly active the surfaces of PEEK and PPS composites for the following co-cure joining with epoxy composites. A single...

Numerical investigation on the surface crack growth in FRP-reinforced steel plates subjected to tension

In this paper, we analyse the surface crack growth in the Fibre-Reinforced Polymer (FRP) reinforced steel plates subjected to tension by means of the finite element (FE) method. Following the experimental study, a three-dimensional FE model is developed to evaluate the Stress Intensity Factor (SIF) of the surface crack, and the crack growth...

External surface cracked offshore steel pipes reinforced with composite repair system subjected to cyclic bending: An experimental investigation

In this paper, we experimentally studied the external surface crack growth in steel pipes reinforced with Composite System Repaired (CRS). CRS reinforced surface cracked API 5L X65 pipes were tested, containing three initial notch sizes and four reinforcement schemes. During the tests, the crack growth results, as well as the strain on the...

An investigation on the circumferential surface crack growth in steel pipes subjected to fatigue bending

In the present paper, we propose an analytical method to calculate the Stress Intensity Factor (SIF) of circumferential surface cracks in steel pipes subjected to bending. In light of pipe geometry and bending load case, the analytical formula is raised by introducing new bending correction factors and new geometry correction factors on the...

A Method for Determining the Length of FBG Sensors Accurately

In this letter, we propose a method for estimating the length of single-mode fiber Bragg grating type sensors with high accuracy. Our method is based on calculating the maximum oscillation frequency of the side-lobes of the FBG reflection spectrum. We show that this frequency is independent of the stress field to which the sensor is subjected...

Structural integrity assessment of maritime transport equipment

Structural integrity assessment is the study of the safe design and assessment of components and structures under loads, and has become increasingly important in engineering design. The technology and applications of structural integrity widely range from transportation, oil and gas, power generation to petrochemical, nuclear sectors, etc. In...