Feasibility Study of Controlled-Source Electromagnetic Method for Monitoring Low-Enthalpy Geothermal Reservoirs

Tracking temperature changes by measuring the resulting resistivity changes inside low-enthalpy reservoirs is crucial to avoid early thermal breakthroughs and maintain sustainable energy production. The controlled-source electromagnetic method (CSEM) allows for the estimation of sub-surface resistivity. However, it has not yet been proven that...

An Introduction to the Application of Marine Controlled-Source Electromagnetic Methods for Natural Gas Hydrate Exploration

Natural gas hydrates have been an unconventional source of energy since the beginning of this century. Gas-hydrate-filled reservoirs show higher resistivity values compared with water-filled sediments. Their presence can be detected using marine controlled-source electromagnetic methods. We classify acquisition configurations into stationary and...

Feasibility Study of Monitoring Delft Geothermal Project Using Land Controlled- Source Electromagnetic Method

Delft geothermal project (DAPwell) is a planned geothermal well doublet, where relatively cold water is going to be injected through one well into a low enthalpy geothermal reservoir to produce hot water from the other well. The volume of the cold water around the injection well will increase over time and, in the end, result in a thermal...

Fast Fourier transform of electromagnetic data for computationally expensive kernels

3-D controlled-source electromagnetic data are often computed directly in the domain of interest, either in the frequency domain or in the time domain. Computing it in one domain and transforming it via a Fourier transform to the other domain is a viable alternative. It requires the evaluation of many responses in the computational domain if...

Examples of Seismic Shallow Subsurface Characterisation and Deep Electromagnetic Monitoring

Difficulties in detecting and characterising shallow objects close the surface with seismic shear waves are often problematic because of dominant surface waves. By sequencing a specific combination of two data driven processing steps followed by diffraction tomography can overcome these problems. Small scattering objects become visible in the...

Time-Domain CSEM Modelling Using Frequency- and Laplace-Domain Computations

Modelling time-domain electromagnetic data with a frequency-domain code requires the computation of many<br/>frequencies for the Fourier transform. This can make it computationally very expensive when compared with timedomain codes. However, it has been shown that frequency-domain codes can be competitive if frequencydependent modelling grids...

emg3d: A multigrid solver for 3D electromagnetic diffusion

Controlled-source electromagnetic (CSEM) surveys are a common geophysical investigationtool in the search for, amongst other, groundwater, hydrocarbons, and minerals. The nu-merical modelling of CSEM data requires the solution of the Maxwell equations. These canbe simplified in the particular case of CSEM, as the frequencies used in surveys are...

A tool for designing digital filters for the Hankel and Fourier transforms in potential, diffusive, and wavefield modeling

The open-source code fdesign makes it possible to design digital linear filters for the Hankel and Fourier transforms used in potential, diffusive, and wavefield modeling. Digital filters can be derived for any electromagnetic (EM) method, such as methods in the diffusive limits (direct current, controlledsource EM [CSEM]) as well as methods...