Searched for: +
(61 - 80 of 525)

Pages

document
Menendez Agudin, A. (author), Jaikumar, Kalpesh (author), Chandra Mouli, G.R. (author), Slaifstein, D.A. (author), Pool, Jeroen (author), Bauer, P. (author)
This paper presents a Mix Integer Linear Programming (MILP) optimization approach to reduce peak demand and maximize revenue in a grid-connected building with a PV-equipped charging station for Shared EVs. The study investigates the impact of EV availability on the effectiveness of the system by comparing the results for different connection...
conference paper 2023
document
Kardan Halvaei, F. (author), Shekhar, A. (author), Bauer, P. (author)
EV fast chargers are essential in addressing the concern of limited driving range for E-mobility applications. However, the load profile of a converter for fast charging involves a high-current pulse that can last for a few minutes to efficiently replenish the EV battery, which is followed by a cooldown period after the charging process is...
conference paper 2023
document
Zhu, G. (author), Dong, J. (author), Bauer, P. (author)
It is ideal for the wireless power transfer (WPT) systems to operate at the resonance state for better transmission performance. In practice, however, the parameters of the resonant circuits often deviate because of the capacitance drift and coil misalignment. To this end, this paper proposes a new parameter estimation method for the WPT systems...
conference paper 2023
document
Slaifstein, D.A. (author), Alpizar Castillo, J.J. (author), Menendez Agudin, A. (author), Ramirez Elizondo, L.M. (author), Chandra Mouli, G.R. (author), Bauer, P. (author)
In the context of building electrification the operation of distributed energy resources integrating multiple energy carriers poses a significant challenge. Such an operation calls for an energy management system that decides the set-points of the primary control layer in the best way possible. This is done by fulfilling user requirements,...
conference paper 2023
document
Molenaar, M. (author), Kardan Halvaei, F. (author), Shekhar, A. (author), Bauer, P. (author)
The reliability of semiconductor power devices can be studied by performing a thermal and power cycling test. In order to create the desired temperature cycles, there are four free variables to select during the power cycling test, namely the heating current, heating time, cooling time, and heatsink temperature. In this paper, the relation...
conference paper 2023
document
Deshmukh, R.S. (author), Rituraj, G. (author), Vahedi, H (author), Shekhar, A. (author), Bauer, P. (author)
Electrolysis requires a high DC current at low voltage to produce hydrogen from water. Designing power converters for such a load requirement could be challenging while fulfilling the galvanic isolation needs. Therefore, prior knowledge of the electrolyzer's impact on the converter operation should be needed. In this context, this paper...
conference paper 2023
document
Mirzadarani, R. (author), Ghaffarian Niasar, M. (author), Li, Z. (author), Qin, Z. (author), Vaessen, P.T.M. (author), Bauer, P. (author), Van Lieshout, Lou (author)
Green hydrogen production uses renewable energies to energise the electrolysers for hydrogen production. The present paper compares possible solutions and configurations of a medium-frequency transformer (MFT) as part of a solid-state transformer (SST) in green hydrogen production applications. The single-phase and three-phase MFTs are compared...
conference paper 2023
document
Wu, Y. (author), Xu, J. (author), Soeiro, Thiago B. (author), Stecca, M. (author), Bauer, P. (author)
Variable switching frequency PWM (VSFPWM) modulation can be advantageously implemented in industrial applications, such as renewable energy, motor drives, and uninterrupted power supply (UPS) systems, to reduce the injected current harmonic amplitudes, to suppress audible noise, and to improve semiconductor power efficiency. In this article,...
journal article 2022
document
Rao, Ziyuan (author), Tung, Po Yen (author), Xie, Ruiwen (author), Wei, Ye (author), Ferrari, A. (author), Klaver, T.P.C. (author), Körmann, F.H.W. (author), Li, Zhiming (author), Bauer, Stefan (author), Raabe, Dierk (author)
High-entropy alloys are solid solutions of multiple principal elements that are capable of reaching composition and property regimes inaccessible for dilute materials. Discovering those with valuable properties, however, too often relies on serendipity, because thermodynamic alloy design rules alone often fail in high-dimensional composition...
journal article 2022
document
McKenna, Russell (author), Pfenninger, Stefan (author), Heinrichs, Heidi (author), Schmidt, Johannes (author), Staffell, Iain (author), Bauer, Christian (author), Gruber, Katharina (author), Hahmann, Andrea N. (author), Jansen, Malte (author), Klingler, Michael (author), Landwehr, Natascha (author), Larsén, Xiaoli Guo (author), Lilliestam, Johan (author), Pickering, Bryn (author), Robinius, Martin (author), Tröndle, Tim (author), Turkovska, Olga (author), Wehrle, Sebastian (author), Weinand, Jann Michael (author), Wohland, Jan (author)
The rapid uptake of renewable energy technologies in recent decades has increased the demand of energy researchers, policymakers and energy planners for reliable data on the spatial distribution of their costs and potentials. For onshore wind energy this has resulted in an active research field devoted to analysing these resources for regions...
review 2022
document
Barczyk, R.T. (author), Parappurath, Nikhil (author), Arora, S. (author), Bauer, T.A. (author), Kuipers, L. (author), Verhagen, Ewold (author)
The introduction of topological concepts to the design of photonic crystal cavities holds great promise for applications in integrated photonics due to the prospect of topological protection. This study examines the signatures of topological light confinement in the leakage radiation of 2D topological photonic crystal cavities. The cavities are...
journal article 2022
document
Stecca, M. (author), Soeiro, Thiago B. (author), Iyer, A.K. (author), Bauer, P. (author), Palensky, P. (author)
This article discusses the application of battery energy storage systems (BESSs) as power redistributors in three-phase distribution grids as an add-on functionality to typical BESS applications, such as congestion management and energy arbitrage. Combining those ancillary services into a single power unit is not yet performed in practice but...
journal article 2022
document
Granello, P. (author), Soeiro, Thiago B. (author), van der Blij, N.H. (author), Bauer, P. (author)
This article proposes an analytical methodology to evaluate the performance of the main partial power processing (PPP) architectures in terms of the improvements in the system's conversion efficiency. This analysis considers the influence of the system's voltage gain, the auxiliary dc/dc converter's efficiency, and the possibility of...
journal article 2022
document
Shekhar, A. (author), Bauer, P. (author)
book chapter 2022
document
Shi, W. (author), Dong, J. (author), Soeiro, Thiago B. (author), Deng, Junjun (author), Riekerk, C. (author), Bauer, P. (author)
Resonant circuits are commonly used in inductive power transfer (IPT) systems for the charging of electric vehicles because of the high power efficiency. Transient behaviors of the resonant circuits, which play a significant role in the design and analysis of IPT systems, are cumbersome to model analytically because of the high-order. This...
journal article 2022
document
Ganeshpure, D.A. (author), Soundararajan, Ajeeth Phrassanna (author), Soeiro, Thiago B. (author), Ghaffarian Niasar, M. (author), Vaessen, P.T.M. (author), Bauer, P. (author)
This article compares the pulse current capability of various Semiconductor (SM) device technologies for Modular Multilevel Converter (MMC)-based High Voltage (HV) Arbitrary Waveform Generator (AWG) for dielectric testing of grid assets to find the most suitable SM device technology which can perform well in generating lightning impulse that...
conference paper 2022
document
Liang, Y. (author), Wang, L. (author), Qin, Z. (author), Bauer, P. (author)
In emerging fast-charging stations, DC fast chargers (DCFCs) are employed which rely on power electronics and control to achieve the required performance. Harmonic emission induced by the complex system behavior is of great concern in the DCFC system. This paper proposes a harmonic emission model for the typical electric vehicle charger...
conference paper 2022
document
Yadav, S. (author), Qin, Z. (author), Bauer, P. (author)
Balancing converters are an integral part of a bipolar dc grid. Resonant converter topologies are interesting for power electronics engineers due to their soft switching capabilities. A series resonant converter topology is promising as a balancing converter in a bipolar dc grid. The series resonant converter is usually a non-inverting...
conference paper 2022
document
Lan, Dun (author), Wu, Y. (author), Soeiro, Thiago Batista (author), Granello, P. (author), Qin, Z. (author), Bauer, P. (author)
This paper presents the study of a 100kW electric vehicle (EV) fast charger based on a 12-pulse rectifier cascaded with two buck-type DC-DC converters. The proposed circuit operates with a triangular current shaping method which considerably improves the current harmonics performance of the system. The studied circuit is particularly suited...
conference paper 2022
document
Granello, P. (author), Schirone, Luigi (author), Bauer, P. (author), Miceli, Rosario (author), Pellitteri, Filippo (author)
The inherently intermittent nature of photovoltaic (PV) energy has brought increasing interest towards the integration between PV sources and Battery Energy Storage Systems (BESS). In this paper, a Series Partial Power Processing (PPP) converter based on Capacitive Power Transfer (CPT) is proposed to integrate PV and BESS in a grid-connected...
conference paper 2022
Searched for: +
(61 - 80 of 525)

Pages