- document
-
Wang, Xiao Lin (author), Zhong, Yuanguang (author), Li, L. (author), Xie, Wei (author), Ye, Zhi Sheng (author)Problem definition: Warranty reserves are funds used to fulfill future warranty obligations for a product. In this paper, we investigate the warranty reserve planning problem faced by a manufacturing firm who manages warranties for multiple products. Academic/practical relevance: It is nontrivial to determine a proper amount of reserves to...journal article 2022
- document
-
Li, Z. (author), Liang, X. (author), Liu, C. (author), Liang, M. (author), van Breugel, K. (author), Ye, G. (author)This study investigates the deformation of free and stress of restrained alkali-activated slag concrete (AASC), respectively, under semi-adiabatic condition. The concrete shows first thermal expansion, which is compensated soon by autogenous shrinkage. The subsequent cooling down of the concrete aggravates shrinkage and development of tensile...journal article 2022
- document
-
Avet, François (author), Li, Xuerun (author), Ben Haha, Mohsen (author), Bernal, Susan A. (author), Bishnoi, Shashank (author), Cizer, Özlem (author), Cyr, Martin (author), Ye, G. (author), Zhang, Shizhe (author)The results of phase 1 of an interlaboratory test, coordinated by the RILEM TC 267-TRM “Tests for Reactivity of Supplementary Cementitious Materials” showed that the R<sup>3</sup> (rapid, relevant, reliable) test method, by measurement of heat release or bound water, provided the most reliable and relevant determination of the chemical...journal article 2022
- document
-
Zhang, Shizhe (author), Li, Z. (author), Ghiassi, B. (author), Yin, Suhong (author), Ye, G. (author)This study presents a comprehensive experimental investigation on the fracture properties of hardened alkali-activated slag/fly ash (AASF) pastes in relation to the microstructure formation and reaction product composition. The main reaction product in AASF is C-(N-)A-S-H gel along with minor hydrotalcite phase, with the polymerization of C-...journal article 2021
- document
-
Li, Z. (author), Beltran, Irving Alfredo Flores (author), Chen, Y. (author), Šavija, B. (author), Ye, G. (author)In this study, glass wool waste was utilized by means of alkali-activation with blast furnace slag. Reaction kinetics, workability, mechanical properties and autogenous shrinkage of alkali-activated slag and glass wool were comprehensively studied. Results indicated an optimal modulus (SiO<sub>2</sub>/Na<sub>2</sub>O) of the activator related...journal article 2021
- document
-
Li, Z. (author), Lu, T. (author), Chen, Y. (author), Wu, B. (author), Ye, G. (author)This study aims to predict the autogenous shrinkage of alkali-activated concrete (AAC) based on slag and fly ash. A variety of analytical and numerical models are available for the prediction of autogenous shrinkage of ordinary Portland cement (OPC) concrete, but these models are found to show dramatic discrepancies when applied for AAC due...journal article 2021
- document
-
Huang, Xinxing (author), Li, Yifan (author), Tian, Zhan (author), Ye, Qinghua (author), Ke, Q. (author), Fan, Dongli (author), Mao, Ganquan (author), Chen, Aifang (author), Liu, Junguo (author)Efficient and accurate streamflow predictions are important for urban water management. Data-driven models, especially neural network (NN) models can predict streamflow fast, while the results are uncertain in some complex river systems. Physically based models can reveal the underlying physics, but it is relatively slow and computationally...journal article 2021
- document
-
Li, Z. (author), Delsaute, Brice (author), Lu, Tianshi (author), Kostiuchenko, A. (author), Staquet, Stéphanie (author), Ye, G. (author)This study aims to compare the developments of mechanical properties and autogenous shrinkage related properties of alkali-activated materials-based concrete (AC) and ordinary Portland cement-based concrete (OC) against curing age and degree of reaction. Temperature Stress Testing Machines are utilized to monitor the evolution of the internal...journal article 2021
- document
-
Li, Z. (author), Liang, X. (author), Chen, Y. (author), Ye, G. (author)The high autogenous shrinkage of alkali-activated materials made from slag and fly ash is recognised as a major drawback with regard to the use as construction materials. In this study, metakaolin was introduced into the alkali-activated slag-fly ash (AASF) paste to mitigate the autogenous shrinkage. The shrinkage mitigation mechanism of...journal article 2021
- document
-
Jin, C. (author), Li, B. (author), Ye, Zhaoying (author), Xiang, Pengcheng (author)In recent years, more and more construction enterprises are expanding into overseas markets, especially in underdeveloped regions such as Africa. Compared to domestic construction projects, international construction projects have been faced with more uncertainties and increased levels of safety risks to the employees in the context of political...journal article 2021
- document
-
Wei, L. (author), Li, Z. (author), Ye, G. (author), Rietveld, L.C. (author), van Halem, D. (author)Excessive F<sup>-</sup> in drinking water due to natural and anthropogenic activities is a serious health hazard affecting humans worldwide. In this study, a comparative assessment was made of eight mineral-based materials with advantageous structural properties for F<sup>-</sup> uptake: layered-double-hydroxides (LDHs), geopolymers,...journal article 2021
- document
-
Zou, Sheng (author), Xiao, Hanbin (author), Ye, Fangping (author), Li, Z. (author), Tang, Wenzhi (author), Zhu, Feng (author), Chen, Chentong (author), Zhu, Chao (author)The inevitably formed residual stress in the Selective Laser Melting (SLM) process leads to distortion, crack and even delamination of the workpiece. Single laser is commonly applied during SLM processing. However, its productivity is much lower than multiple lasers. In addition, the research of residual stress with multi-laser condition...journal article 2020
- document
-
Zhang, Shizhe (author), Li, Victor C. (author), Ye, G. (author)Strain-hardening geopolymer composite (SHGC) lately emerged as a promising alternative to traditional strain-hardening cementitious composite with added advantages of industrial by-product utilization and enhanced sustainability. However, as the design of SHGC requires multi-factor optimization, the application of traditional trial-and-error...journal article 2020
- document
-
Li, Z. (author), Lu, T. (author), Liang, X. (author), Dong, H. (author), Ye, G. (author)This study aims to provide a better understanding of the autogenous shrinkage of slag and fly ash-based alkali-activated materials (AAMs) cured at ambient temperature. The main reaction products in AAMs pastes are C-A-S-H type gel and the reaction rate decreases when slag is partially replaced by fly ash. Due to the chemical shrinkage and the...journal article 2020
- document
-
Li, Z. (author), Wyrzykowski, Mateusz (author), Dong, H. (author), Granja, José (author), Azenha, Miguel (author), Lura, Pietro (author), Ye, G. (author)In this study, internal curing by superabsorbent polymers (SAP) is utilized to mitigate self-desiccation and autogenous shrinkage of alkali-activated slag (AAS) pastes. Absorption and desorption kinetics of SAP incorporated in AAS pastes were studied with X-ray tomography. Internal curing delayed the peak of the rate of heat liberation but...journal article 2020
- document
-
Li, Z. (author), Zhang, Shizhe (author), Liang, X. (author), Ye, G. (author)This study aims to investigate the cracking potential of alkali-activated slag (AAS) and alkali-activated slag-fly ash (AASF) concrete subjected to restrained autogenous shrinkage. Temperature Stress Testing Machine (TSTM) is utilized, for the first time, to monitor the stress evolution and to measure the cracking time of alkali-activated...journal article 2020
- document
-
Li, Z. (author), Yao, X. (author), Chen, Y. (author), Lu, T. (author), Ye, G. (author)Alkali-activated slag and fly ash (AASF) materials are emerging as promising alternatives to conventional Portland cement. Despite the superior mechanical properties of AASF materials, they are known to show large autogenous shrinkage, which hinders the wide application of these eco-friendly materials in infrastructure. To mitigate the...journal article 2020
- document
-
Li, Z. (author), Zhang, Shizhe (author), Liang, X. (author), Granja, José (author), Azenha, Miguel (author), Ye, G. (author)This study investigates the influences of internal curing on reducing the autogenous shrinkage of alkali-activated slag/fly ash (AASF) paste. The influences of internal curing with superabsorbent polymers (SAPs) on the reactions and microstructure of AASF paste are investigated. It is found that the SAPs absorb liquid mainly before the...journal article 2020
- document
-
Han, Rui (author), Liu, Chi Harold (author), Li, Shilin (author), Chen, Lydia Y. (author), Wang, Guoren (author), Tang, Jian (author), Ye, Jieping (author)The core of many large-scale machine learning (ML) applications, such as neural networks (NN), support vector machine (SVM), and convolutional neural network (CNN), is the training algorithm that iteratively updates model parameters by processing massive datasets. From a plethora of studies aiming at accelerating ML, being data...journal article 2019
- document
-
Wu, Dequan (author), Zhang, D. (author), Ye, Yuwei (author), Ma, Lingwei (author), Minhas, Badar (author), Liu, Bei (author), Terryn, H.A. (author), Mol, J.M.C. (author), Li, Xiaogang (author)Recently, lubricant-infused surfaces (LIS) have emerged as a prominent class of surface technology for antifouling, anti-icing and anticorrosion applications. However, long-term corrosion exposure and mechanical damages may deteriorate the practical performance of LIS during application. In this study, a robust LIS was fabricated by the...journal article 2019