- document
- Vogelesang, L.B. (author), Marissen, R. (author), Schijve, J. (author) report 1981
- document
- Schijve, J. (author) report 1981
- document
- Schijve, J. (author), Snijder, J. (author) report 1981
- document
- Schijve, J. (author) report 1981
- document
- Schijve, J. (author) report 1980
- document
- Schijve, J. (author) report 1980
- document
- Schijve, J. (author) report 1980
- document
- Schijve, J. (author) report 1980
- document
-
Schijve, J. (author)Paper presented at the 16th ICAP Conference, Brussels, 14 and 15 May 1979.report 1979
- document
- Schijve, J. (author) report 1979
- document
- Schijve, J. (author) report 1979
- document
- Vlasveld, J.A. (author), Schijve, J. (author) report 1979
- document
- Vogelesang, L.B. (author), Schijve, J. (author) report 1979
- document
-
Schijve, J. (author), Jacons, F.A. (author), Meulman, A.E. (author)Flight simulation tests on 2024-T3 and 7075-T6 lug specimens indicated significant fatigue life improvements obtained by expanding the holes in accordance with the split-sleeve cold work method. Geometrical distortions induced by the expansion were measured. The significance of residual stresses is analysed with reference to depth of penetration...report 1978
- document
- Schijve, J. (author), van Lipzig, H.T.M. (author), van Gestel, G.F.J.A. (author), Hoeymakers, A.H.W. (author) report 1978
- document
- Schijve, J. (author), Hoeymakers, A.H.W. (author) report 1978
- document
- Schijve, J. (author) report 1978
- document
-
de Rijk, P. (author), Schijve, J. (author)A second series of exploratory acoustic fatigue tests using a shaker. A second series of exploratory acoustic fatigue tests was carried out, again employing simple specimens mounted on a shaker. Strain measurements were compared with calculations. Crack growth initiated by a central notch was observed. A comparison was made between three types...report 1977
- document
-
Schijve, J. (author), Jacobs, F.A. (author), Tromp, P.J. (author)Comparative flight-simulation tests on four types of joints of 2024- T3 sheet material were carried out with and without application of the penetrant LPS-3. Types of joints were douhle strap joint with hi-lok bolts, asymmetric strap joint, lap joint with countersunk rivets and lap joint with dimpled holes. Observations on slip during the fatigue...report 1977
- document
-
Jacobs, F.A. (author), Schijve, J. (author), Tromp, P.J. (author)Fatigue tests under flight-simulation loading have been performed on unnotched Alclad 2024-T3, anodised 2.0 mm thick sheet specimens, manufactured according to several machine-shop processes applied in the air craft industry. From the results it appears that milling is preferable to stamping. Rounding off the edges is also advantageous. The...report 1977