Searched for: +
(41 - 60 of 64)

Pages

document
Li, Minglei (author), Zhao, Xingke (author), Li, Jiasong (author), Nan, L. (author)
We propose a deep learning-based method for object detection in UAV-borne thermal images that have the capability of observing scenes in both day and night. Compared with visible images, thermal images have lower requirements for illumination conditions, but they typically have blurred edges and low contrast. Using a boundary-aware salient...
journal article 2021
document
Li, Chenchen (author), Yang, Fan (author), Liu, Pengfei (author), Fu, Chaoliang (author), Liu, Quan (author), Zhao, Hongduo (author), Lin, P. (author)
To improve the energy harvesting efficiency of the piezoelectric device, a stack units-based structure was developed and verified. Factors such as stress distribution, load resistance, loads, and loading times influencing the piezoelectric properties were investigated using theoretical analysis and experimental tests. The results show that the...
journal article 2021
document
Liu, M. (author), Wang, C. (author), Zhao, C. (author), van der Maas, E.L. (author), Lin, Kui (author), Arszelewska, Violetta (author), Li, Baohua (author), Ganapathy, S. (author), Wagemaker, M. (author)
A key challenge for solid-state-batteries development is to design electrode-electrolyte interfaces that combine (electro)chemical and mechanical stability with facile Li-ion transport. However, while the solid-electrolyte/electrode interfacial area should be maximized to facilitate the transport of high electrical currents on the one hand,...
journal article 2021
document
Zhao, Weizun (author), Li, L. (author), Alam, Sameer (author), Wang, Yanjun (author)
Safety is a top priority for civil aviation. Data mining in digital Flight Data Recorder (FDR) or Quick Access Recorder (QAR) data, commonly referred to as black box data on aircraft, has gained interest for proactive safety management. New anomaly detection methods, primarily clustering methods, have been developed to monitor pilot...
journal article 2021
document
Li, Lijun (author), Wang, Rui (author), Zhao, Hui (author), Zhang, Haoran (author), Yan, R. (author)
This paper presents an experimental investigation on the dynamic mechanical performance of S30408 austenitic stainless steel (ASS) under elevated temperatures, which is essential for determining the behaviour of structures made with this type of steel subjected to the coupled fire and impact/explosion. For this purpose, the quasi-static and...
journal article 2021
document
Zhang, An Ni (author), Gaston, Jeffry M. (author), Dai, Chengzhen L. (author), Zhao, Shijie (author), Poyet, Mathilde (author), Groussin, Mathieu (author), Li, Li Guan (author), van Loosdrecht, Mark C.M. (author), Zhang, Tong (author)
Antibiotic resistance genes (ARGs) are widespread among bacteria. However, not all ARGs pose serious threats to public health, highlighting the importance of identifying those that are high-risk. Here, we developed an ‘omics-based’ framework to evaluate ARG risk considering human-associated-enrichment, gene mobility, and host pathogenicity....
journal article 2021
document
Qu, L. (author), Li, Y. (author), Ghini, M. (author), Mukkamala, T. (author), Peng, B. (author), Mohamed Rani, Marina (author), Wu, J. (author), Zhao, X. (author)
This publication presents the results of a design lab that explores landscape-based design approaches for adaptive urban transformation in fast urbanizing deltas. While using design as a research strategy landscape architecture principles are explored that ensure water safety and inclusive socio-ecological design. The projects as presented here...
report 2020
document
Zhao, Chenglong (author), Yao, Zhenpeng (author), Wang, Qidi (author), Li, Haifeng (author), Wang, Jianlin (author), Liu, M. (author), Ganapathy, S. (author), Lu, Yaxiang (author), Wagemaker, M. (author)
Layered Na-based oxides with the general composition of NaxTMO2 (TM: transition metal) have attracted significant attention for their high compositional diversity that provides tunable electrochemical performance for electrodes in sodium-ion batteries. The various compositions bring forward complex structural chemistry that is decisive for...
journal article 2020
document
Li, H. (author), Wang, Hao (author), Alderliesten, R.C. (author), Xiang, Junxian (author), Lin, Yanyan (author), Xu, Yingmei (author), Zhao, Haidan (author), Tao, Jie (author)
The effect of shot peen forming on the mechanical behavior of fiber metal laminates (FMLs) based on aluminium-lithium alloy was investigated to reveal the strengthening mechanism and to dispel the suspicion that shot peen forming may result in the performance deterioration of FMLs. The interlaminar, static strength and fatigue properties of...
journal article 2020
document
Li, Y. (author), Zhang, Z. R. (author), Zhao, Z. Y. (author), Li, H. X. (author), Katgerman, L. (author), Zhang, J. S. (author), Zhuang, L. Z. (author)
New 7xxx aluminum alloys with high alloying contents are being designed, which could induce serious hot tearing defects during direct-chill (DC) casting. Among all factors affecting hot tearing of 7xxx alloys, undoubtedly alloying elements play a significant role. In this study, the effect of main alloying elements (Zn, Mg, and Cu) on hot...
journal article 2019
document
Zhao, Zhenqiang (author), Dang, Haoyuan (author), Xing, Jun (author), Li, X. (author), Zhang, Chao (author), Binienda, Wieslaw K. (author), Li, Yulong (author)
The mechanical characterization of textile composites is a challenging task, due to their nonuniform deformation and complicated failure phenomena. This article introduces a three-dimensional mesoscale finite element model to investigate the progressive damage behavior of a notched single-layer triaxially-braided composite subjected to axial...
journal article 2019
document
Hao, Lixiao (author), Xing, Yue (author), Li, Xuanyu (author), Mu, Bin (author), Zhao, Weina (author), Wang, G. (author), Wang, Ting (author), Jia, Jianguo (author), Han, Ying (author)
Background: Since subjective cognitive decline (SCD) was standardized in 2014, many studies have investigated its features. However, the risk of SCD (plus) progressing to AD is much higher, and yet there have been few studies reporting the risk factors and neuropsychological assessment characteristics of SCD (plus). Objective: To characterize...
journal article 2019
document
Li, Mengmeng (author), Mangalore, Deepthi Kamath (author), Zhao, Jingbo (author), Carpenter, Joshua H. (author), Yan, Hongping (author), Ade, Harald (author), Müllen, Klaus (author), Blom, Paul W.M. (author), Pisula, Wojciech (author), de Leeuw, D.M. (author), Asadi, Kamal (author), Yan, He (author)
It is still a great challenge to fabricate conjugated polymer monolayer field-effect transistors (PoM-FETs) due to intricate crystallization and film formation of conjugated polymers. Here we demonstrate PoM-FETs based on a single monolayer of a conjugated polymer. The resulting PoM-FETs are highly reproducible and exhibit charge carrier...
journal article 2018
document
Ying, Shen (author), Guo, Renzhong (author), Li, Weiyang (author), Yang, Jie (author), Zhao, Zhigang (author), Li, Lin (author)
There are many 3D objects with denser aggregation that they are fully/partly coherent touched with each other through shared facets, which we called coherent set of 3D objects. Visualization for 3D property unit is an effective way to understand 3D spatial occupation, location and relationship in urban space, particularly in the coherent set of...
conference paper 2016
document
Li, Z. (author), Zhao, X. (author), Dollevoet, R.P.B.J. (author)
A methodology for the determination of a critical size of surface defects, above which RCF can initiate, has been developed and demonstrated with its application to the passive type of squats under typical Dutch railway loading conditions. Such a methodology is based on stress evaluation of transient rolling contact at the defects, for which...
journal article 2016
document
Guo, Renzhong (author), Luo, Feng (author), Zhao, Zhigang (author), He, Biao (author), Li, Lin (author), Luo, Ping (author), Ying, Shen (author)
As the economy and urbanization develop, the expansion of the city not only develops towards the horizontal space, but also towards the vertical space. Facing the development of three-dimensional (3D) space, the traditional two-dimensional (2D) cadastral management mode cannot satisfy the need of current 3D land use and urban plan, so developing...
conference paper 2014
document
Li, Jinxuan (author), Liu, Shuxue (author), Zhao, Min (author), Teng, Bin (author)
conference paper 2013
document
Yu, Changbin (author), Li, Lin (author), Ying, Shen (author), He, Biao (author), Zhao, Zhigang (author), Wan, Yuan (author)
When the land use pattern changes from an extensive way to an intensive way, the development of 3D land-use has become reality. Due to the vertical heterogeneity of property rights, establishment of 3D cadastre is imperative. Meanwhile, registration and certification of the property rights have become important approaches to serve public and...
conference paper 2012
document
Guo, Renzhong (author), Yu, Changbin (author), He, Biao (author), Zhao, Zhigang (author), Li, Lin (author), Ying, Shen (author)
The establishment of 3D cadastre is imperative and needs support from legal, organizational and technological aspects. In Shenzhen, China, establishment of 3D cadastre has achievedgreat progress. The joint register mechanism was employedfirstly in Shenzhen, and related research is going on, including definitions, visualization and topological...
conference paper 2012
document
Zhao, Zhigang (author), Guo, Renzhong (author), Li, Lin (author), Ying, Shen (author)
With the accelerated urbanization process, the trend of three-dimensional land use makes the traditional model of 2D cadastral management encounter challenges, because of insufficiency to express in 3D. Therefore, the 3D cadastre and related concepts have been proposed. The breadth and depth of its research are gradually broadened and refined....
conference paper 2012
Searched for: +
(41 - 60 of 64)

Pages