Can superabsorbent polymers be used as rheology modifiers for cementitious materials in the context of 3D concrete printing?

Autogenous shrinkage may be a critical issue concerning the use of limestone-calcined clay-cement (LC3) in high-performance concrete and 3D printable cementitious materials, which have relatively low water to binder (W/B) ratio. Adding an internal curing agent, i.e., superabsorbent polymer (SAP), could be a viable solution in this context....

Effect of superabsorbent polymer introduction on properties of alkali-activated slag mortar

Internal curing by superabsorbent polymer (SAP) has been applied in alkali-activated slag (AAS) systems by a few previous studies with the purpose to mitigate the autogenous shrinkage. However, the effects of SAP on other properties of AAS have been rarely studied. In this paper, the workability, strength, permeability, and frost resistance...

Influence of liquid-binder ratio on the performance of alkali-activated slag mortar with superabsorbent polymer

The influences of liquid-binder ratio and mixing sequence on the performance of superabsorbent polymer (SAP)-containing alkali-activated slag (AAS) mortar are investigated in this study. It is found that the SAP absorbs much less liquid in upper supernatant of AAS than in water. Mixing SAP with liquid first induces a larger absorption...

Superabsorbent polymer additives for repeated barrier restoration of damaged powder coatings under wet-dry cycles: A proof-of-concept

Superabsorbent polymers (SAPs) are well known for their ability to absorb and hold high water amounts accompanied by a high volume expansion. In this work we show the benefits of this underlying property of SAPs to induce underwater crack closure with subsequent barrier restoration in damaged protective coatings. For the proof of concept,...