Searched for: +
(41 - 60 of 313)

Pages

document
Wang, J. (author), Yan, Xin ping (author), Boersma, B.J. (author), Lu, Ming jian (author), Liu, Xiaohua (author)
Printed circuit heat exchangers (PCHE) are designed to improve heat recovery and energy saving in supercritical CO<sub>2</sub> (S-CO<sub>2</sub>) power cycles. In the current study, a modified channel PCHE is proposed based on the regular straight channel and a zigzag channel. The thermal–hydraulic performance of four different types of PCHE...
journal article 2023
document
Lu, Qi (author), Li, Shuangmu (author), Zhao, Bo (author), Jiang, Junmin (author), Chen, Zhiyuan (author), Du, S. (author)
Multiple voltage conversion ratio (VCR) recursive switched-capacitor (SC) dc-dc converters, based on several basic 2:1 converters, are widely used for on-chip power supplies due to their flexible VCRs for higher energy efficiency. However, conventional multiple VCR SC converters usually have one or more 2:1 converters unused for some VCRs,...
journal article 2023
document
Lu, T. (author), Du, S. (author)
In this letter, a 6.78-MHz single-stage regulating voltage-doubling rectifier is presented for biomedical wireless power transfer (WPT) applications. Derived from a full-wave voltage doubler, a theoretical voltage conversion ratio (VCR) of 2 can be achieved, which benefits the end-to-end voltage gain of a biomedical WPT system with varying...
journal article 2023
document
Li, Y. (author), Slob, E.C. (author), Werthmüller, D. (author), Wang, Lipeng (author), Lu, Hailong (author)
Natural gas hydrates have been an unconventional source of energy since the beginning of this century. Gas-hydrate-filled reservoirs show higher resistivity values compared with water-filled sediments. Their presence can be detected using marine controlled-source electromagnetic methods. We classify acquisition configurations into stationary and...
journal article 2023
document
Hua, Yuan (author), Lu, Qi (author), Li, Shuangmu (author), Zhao, Bo (author), Du, S. (author)
This brief presents a 48V-to-1V 10-level dual inductor hybrid converter (DIHC) containing 11 on-chip switches and an off-chip gallium nitride (GaN) switch. Thanks to the 10-level Dickson switched-capacitor (SC) circuit, most of the voltage stress will be taken over by off-chip capacitors, which reduces the voltage stress of each switch to 4.8...
journal article 2023
document
Chen, Yuanyuan (author), Dai, Hanqing (author), Yan, Yukun (author), Piao, Zhiyan (author), Lu, Hanxu (author), Hu, Zhe (author), Wei, Wei (author), Zhang, Kouchi (author), Zhang, Wanlu (author), Guo, Ruiqian (author)
In recent years, various functional fabrics capable of responding to multistimuli have been widely recognized as promising wearable devices. However, the obtained composite functional fabrics have only been applied in a few scenarios, rendering the achievement of multifunctional wearable application scenarios a difficult goal. Therefore,...
journal article 2023
document
Lu, Jing (author), Zhang, Min (author), Feng, Jianlin (author), Gao, Y. (author), Yang, Ye (author), Li, Yuanyuan (author), Li, Linglin (author)
The special environment conditions in high altitude areas leads to serious cracking and peeling of road hot-melt marking coatings. In order to improve the durability of marking paint, a durable hot-melt marking paint was designed by modifying the paint with toughening-agent, rheological agent, and anti-aging agent. The modification mechanism...
journal article 2023
document
Wang, Chuan (author), Sun, Renjuan (author), Hu, Xinlei (author), Guan, Yanhua (author), Yang, Yingzi (author), Lu, Wei (author), Tian, Jun (author), Zhang, Hongzhi (author), Ge, Zhi (author), Šavija, B. (author)
This paper presents a research on the chloride penetration behavior of engineered cementitious composites (ECC) under sustained flexural loads. Three load levels, i.e. 30 %, 60 % and 75 % of the ultimate flexural load were used. Chloride diffusion depth and concentration profile were measured 30, 60 and 150 days after the specimen was exposed...
journal article 2023
document
Lu, Jenny (author), Vermolen, F.J. (author)
In this paper a Spatial Markov Chain Cellular Automata model for the spread of viruses is proposed. The model is based on a graph with connected nodes, where the nodes represent individuals and the connections between the nodes denote the relations between humans. In this way, a graph is connected where the probability of infectious spread...
book chapter 2023
document
Zuo, Hui (author), Yan, Gaowei (author), Lu, Ruochen (author), Li, Rong (author), Xiao, Shuyi (author), Pang, Y. (author)
Accurately predicting runoff is crucial for managing water resources, preventing and mitigating floods, scheduling hydropower plant operations, and protecting the environment. The hydrological dynamic composite system that forms runoff is complex and random, and seemingly random behavior may be caused by nonlinear variables in a simple...
journal article 2023
document
Lu, J. (author), Yang, Y. (author), van der Ham, H.W.M. (author), Fu, Danny (author)
Geopolymer concrete is a new alternative material to conventional concrete with less carbon dioxide emissions. Researchers have reported much research on the material properties of geopolymer concrete. However, research on the behaviour of this newmaterial at the structural level is still limited, especially at a full-scale structural level....
conference paper 2023
document
Liu, Shurui (author), Lu, T. (author), Tang, Z. (author), Chen, Zhiyuan (author), Jiang, Junmin (author), Zhao, Bo (author), Du, S. (author)
In this article, we propose a reconfigurable regulating rectifier with a wide operational range for wireless power transfer. The proposed three-mode rectifier achieves a broad range voltage regulation without global loop control to minimize the chip area occupation. Compared with previous work, more working modes and greater voltage gain...
journal article 2023
document
Li, Yageng (author), Shi, Yixuan (author), Lu, Yuchen (author), Li, Xuan (author), Zhou, J. (author), Zadpoor, A.A. (author), Wang, Luning (author)
With the advancement of additive manufacturing (AM), customized vascular stents can now be fabricated to fit the curvatures and sizes of a narrowed or blocked blood vessel, thereby reducing the possibility of thrombosis and restenosis. More importantly, AM enables the design and fabrication of complex and functional stent unit cells that...
review 2023
document
Ding, Fangqiang (author), Palffy, A. (author), Gavrila, D. (author), Lu, Chris Xiaoxuan (author)
This work proposes a novel approach to 4D radar-based scene flow estimation via cross-modal learning. Our approach is motivated by the co-located sensing redundancy in modern autonomous vehicles. Such redundancy implicitly provides various forms of supervision cues to the radar scene flow estimation. Specifically, we introduce a multi-task model...
conference paper 2023
document
Lu, L. (author)
This thesis starts with a worrisome observation tied to various phenomena across modern built environments: humans today are experiencing a weakened relatedness to and reduced intimacy with the world around them. In stark contrast to the general trend, however, most Chinese literati gardens maintain their traditional rich conditions, enabling...
doctoral thesis 2022
document
Guo, R. (author), Yuan, Peng (author), Han, Xiying (author), He, Xuexia (author), Lu, Jiangbo (author), Li, Qi (author), Dang, Liqin (author), Sun, Jie (author), Liu, Zonghuai (author), Lei, Zhibin (author)
The Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> film with metallic conductivity and high pseudo-capacitance holds profound promise in flexible high-rate supercapacitors. However, the restacking of Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> sheets hinders ion access to thick film electrodes. Herein, a mild yet green route has been developed to...
journal article 2022
document
Lu, Zhiwei (author), Li, Xiaoling (author), Wei, Jinxiu (author), Cai, Miao (author), Yang, Daoguo (author), Zhang, Kouchi (author)
UVC-LED is known as a deep ultraviolet LED. The application development and disinfection efficiency of UVC-LED modules are important problems encountered when UVC-LED products are rushed into commercialization. In this article, a specific disinfection experiment with a UVC-LED module was combined to analyze the disinfection efficiency. UVC-LEDs...
conference paper 2022
document
He, Xianqi (author), Yang, Lin (author), Lu, Chao (author), Gong, Jianwei (author), Li, Z. (author)
In urban environments, the complex and uncertain intersection scenarios are challenging for autonomous driving. To ensure safety, it is crucial to develop an adaptive decision making system that can handle the interaction with other vehicles. Manually designed model-based methods are reliable in common scenarios. But in uncertain environments,...
conference paper 2022
document
Tang, Zhen (author), Li, Z. (author), Hua, Jiang (author), Lu, Shuang (author), Chi, Lin (author)
Pretreated coconut fibers can be applied as renewable damping components in fiber-reinforced cement mortars to reduce the adverse effects of vibration and promote the recycling of waste fibers. In this study, FT-IR, TG, XRD, and SEM measurements were performed to analyze the morphologies and physicochemical properties of the coconut fibers...
journal article 2022
document
Sun, Renjuan (author), Lu, Wei (author), Tawfek, Abdullah M. (author), Guan, Yanhua (author), Hu, Xinlei (author), Zhang, Hongzhi (author), Ling, Yifeng (author), Šavija, B. (author)
The resistance of cracked ECC against chloride ingress is mainly governed by the accumulated crack width of all the cracks rather than the maximum width of multiple cracks. However, most studies focus on the influence of a single fine crack
journal article 2022
Searched for: +
(41 - 60 of 313)

Pages