Searched for: +
(1 - 20 of 43)

Pages

document
Verberk, Rogier (author), Michalak, D.J. (author), Versluis, R. (author), Polinder, H. (author), Samkharadze, Nodar (author), Amitonov, S. (author), Sammak, A. (author), Tryputen, L. (author), Brousse, D. (author), Hanfoug, R. (author)
As part of the National Agenda for Quantum Technology, QuTech (TU Delft and TNO) has agreed to make quantum technology accessible to society and industry via its full-stack prototype: Quantum Inspire. This system includes two different types of programmable quantum chips: circuits made from superconducting materials (transmons), and circuits...
conference paper 2022
document
Hoogendoorn, G. (author), van den Bos, W. (author), Polinder, H. (author)
Wind turbine industry is growing and future predictions are promising. However, a shortage of installation vessels could influence this growth in offshore wind industry. Commonly, wind turbines are installed in components using a jack-up vessel. Occasionally, wind turbines are installed fully assembled. Lifting above the wind turbine is not...
conference paper 2021
document
Tan, J. (author), Wang, X. (author), Jarquin Laguna, A. (author), Polinder, H. (author), Miedema, S.A. (author)
Downsizing the Power Take-off (PTO) rating has been proven to be beneficial for decreasing the Levelized Cost of Energy (LCOE) of wave energy converters (WECs). However, the linear permanent magnet (PM) generator has not yet been modelled and optimized in detail in previous feasibility studies. This paper extends the study of the PTO...
conference paper 2021
document
Last, T. (author), Samkharadze, Nodar (author), Eendebak, P.T. (author), Versluis, R. (author), Xue, X. (author), Sammak, A. (author), Brousse, D. (author), Loh, K.K.L. (author), Polinder, H. (author), Scappucci, G. (author), Veldhorst, M. (author), Vandersypen, L.M.K. (author), Maturova, K. (author), Veltin, J. (author), Alberts, G.J.N. (author)
The mission of QuTech is to bring quantum technology to industry and society by translating fundamental scientific research into applied research. To this end we are developing Quantum Inspire (QI), a full-stack quantum computer prototype for future co-development and collaborative R&D in quantum computing. A prerelease of this prototype...
conference paper 2020
document
Braemer, A. (author), Atasoy, B. (author), van Tatenhove, Joris (author), Polinder, H. (author)
conference paper 2020
document
Wikkerink, D.P. (author), Hanse, Izak (author), Mor, A. R. (author), Polinder, H. (author), Ross, Robert (author)
Due to their permeability, merchant and naval vessels distort Earth’s magnetic field which leaves a magnetic signature. These anomalies in the magnetic field may be detected by mines leaving the vessel exposed. To avoid detection by magnetic sensors, the vessels magnetic signature can be reduced in several ways. One of them is degaussing: a...
conference paper 2020
document
Neijmeijer, Nout (author), Schulte, F. (author), Tierney, Kevin (author), Polinder, H. (author), Negenborn, R.R. (author)
Dynamic pricing can be used for better fleet distribution in free-floating vehicle sharing (FFVS), and thus increase utilization and revenue for the provider by reducing supply-demand asymmetry. Supply-demand asymmetry refers to the existence of an undersupply of vehicles at some locations at the same time as underutilization of vehicles at...
conference paper 2020
document
Desmedt, Michiel (author), Dong, J. (author), Wani, F.M. (author), Bauer, P. (author), Polinder, H. (author)
This paper analyses the electromechanical dynamics of the pole-piece rotors in a pseudo direct-drive wind turbine generator. The investigated generator has a rated power of 10 MW and was designed in the INNWIND.EU project. One way coupled finite element analysis (FEA) was used to calculate the rotor dynamic defections caused by...
conference paper 2020
document
van Vlijmen, Bruis (author), Goudswaard, Reinier (author), Boere, Remco (author), Schneider, Thomas (author), Polinder, H. (author), Lavidas, G. (author)
It is expected that several identical Point Absorber Wave Energy Converters (PAWECs) will be arranged in arrays to form a Wave Energy Farm. One of the key challenges in designing such a WEC array is their spatial configuration, as the WECs in the farm interact hydrodynamically with each other. This study focuses on different potential PAWEC...
conference paper 2019
document
Lavidas, G. (author), Polinder, H. (author)
To properly assess the energy and waves at a region, it is vital to obtain suitable long term metocean conditions. Although, wave buoys are a significant source of information they are not able to provide a detailed and complete resource assessment, as they have inherent spatiotemporal and recording limitations. Therefore, numerical wave models...
conference paper 2019
document
Wani, F.M. (author), Shipurkar, U. (author), Dong, J. (author), Polinder, H. (author)
Improving availability of tidal turbines has been identified as a key area to lower the levelized cost of energy from tides. One of the approaches suggested to achieve high reliability is to use a flooded permanent magnet (PM) generator. Flooded PM generators are designed to operate with a seawater filled stator-rotor gap in the generator. Using...
conference paper 2019
document
Lavidas, G. (author), Polinder, H. (author)
With the renewable targets of 2020 reaching ever closer, Europe is continuing its ambitious plans for 2030 of developing innovative projects that assist tackling climate change and increase renewable energy integration. The Netherlands are trying to develop their renewable energy portfolio, to create a viable long-term decarbonized sustainable...
conference paper 2019
document
Wikkerink, D.P. (author), Mor, A. R. (author), Polinder, H. (author), Ross, Robert (author)
In order to avoid detection by sea mines, the magnetic signature of merchant and naval vessels can be reduced by running a current through a set of on-board copper coils. This process is called degaussing. Studies have shown that the volume, weight and energy losses of a degaussing system can be reduced by replacing the copper coils with high...
conference paper 2019
document
Cao, Z. (author), Dong, J. (author), Wani, F.M. (author), Polinder, H. (author), Bauer, P. (author), Peng, Fei (author), Huang, Yunkai (author)
A novel controller design procedure is proposed for a 5-degree-of-freedom (DOF) active magnetic bearing (AMB) system, based on sliding mode control (SMC) and neural network (NN). The SMC is used to achieve high robustness and fast response while the NN can compensate unmodeled uncertainty and external disturbance by on-line tuning algorithm. The...
conference paper 2019
document
Veltman, André (author), van der Hulst, Paul (author), Jonker, Marco (author), Polinder, H. (author)
Serious initiatives for high speed transport of vehicles/pods/capsules through evacuated tubes were presented in recent years. Most suggest magnetic levitation and linear motors of long-stator design, assuming passive pods. This paper takes a the different approach, yielding minimal energy use per distance per passenger and lowest initial cost....
conference paper 2019
document
Zwartbol, Arnout (author), Dong, J. (author), Bauer, P. (author), Polinder, H. (author)
This paper proposes an online motor-parameter-estimator for a permanent magnet synchronous motor (PMSM) in an electric vehicle (EV) powertrain. The proposed method uses a recursive least squares filter approach in combination with the discrete time dynamic voltage equations. Stator resistance estimation is decoupled from the estimator using...
conference paper 2019
document
Sprong, Jorben (author), Jiang, X. (author), Polinder, H. (author)
Historic records show that the cost of operating and supporting an aircraft may exceed the initial purchase price as much as ten times. Maintenance, repair and overhaul activities represent around 10-15% of an airlines annual operational costs. Therefore, optimization of maintenance operations to minimize cost is extremely important for airlines...
conference paper 2019
document
Wani, F.M. (author), Dong, J. (author), Yadav, Avinash (author), Polinder, H. (author)
Flooded Generators have been proposed as a possible solution to eliminate the risks due to the seal failure, and improve cooling in tidal stream turbine generators. In a flooded generator, the stator-rotor gap is filled with the seawater; this poses a serious corrosion risk to the material inside the generator. For this reason, a can or a...
conference paper 2018
document
Wani, F.M. (author), Dong, J. (author), Polinder, H. (author)
Permanent magnet machines with fractional slot windings are popular because of their shorter end windings, low cost and ease of manufacturing. On the other hand, fractional slot machines have higher eddy current losses in the rotor magnets and sleeve. An accurate calculation of these losses usually involves a time-stepped finite-element analysis...
conference paper 2018
document
Wang, X. (author), Liu, D. (author), Lahaye, D.J.P. (author), Polinder, H. (author), Ferreira, Jan Abraham (author)
The brushless doubly-fed induction machine (DFIM) has great potential as a variable-speed generator for wind turbine applications. This special machine has a richer space-harmonic spectrum due to its special nested-loop rotor construction compared with conventional induction machines. It may result in higher iron losses, higher torque ripple and...
conference paper 2017
Searched for: +
(1 - 20 of 43)

Pages