Searched for: +
(81 - 100 of 626)

Pages

document
Melman, T. (author), Visser, P. (author), Mouton, Xavier (author), de Winter, J.C.F. (author)
Modern computerized vehicles offer the possibility of changing vehicle parameters with the aim of creating a novel driving experience, such as an increased feeling of sportiness. For example, electric vehicles can be designed to provide an artificial sound, and the throttle mapping can be adjusted to give drivers the illusion that they are...
journal article 2021
document
Visser, Mirjam (author), Stevels, A.L.N. (author), Schoormans, J.P.L. (author)
Although environmental awareness is increasing every year, and most people say they prefer to buy more sustainable products, many still do not act on their promise at the cash counter. Sustainable products are often still perceived to have lower quality or reduced performance. Recom- mendations of sustainable buyers might reduce this perceived...
journal article 2021
document
Kosari, A. (author), Zandbergen, H.W. (author), Tichelaar, F.D. (author), Visser, P. (author), Terryn, H.A. (author), Mol, J.M.C. (author)
Liquid-phase transmission electron microscopy (LP-TEM) has provided corrosion scientists with a unique opportunity to directly correlate nanoscopic morphological and compositional evolutions to the corresponding electrochemical response of corroding thin TEM specimens. Electrochemical liquid cell designs are key components of a LP-TEM study...
journal article 2021
document
Visser, P. (author), Ranade, S. (author), Laird, J. S. (author), Glenn, A. M. (author), Hughes, A. E. (author), Terryn, H.A. (author), Mol, J.M.C. (author)
Depletion depths of inorganic components from a scribe edge in a polyurethane primer containing Li<sub>2</sub>CO<sub>3</sub>, MgO, BaSO<sub>4</sub> and TiO<sub>2</sub> beneath a topcoat, were determined using a range of techniques including SEM/EDS and proton induced X-ray and γ-ray emission spectroscopies. SEM of sections cut using an ion...
journal article 2021
document
Kosari, A. (author), Tichelaar, F.D. (author), Visser, P. (author), Zandbergen, H.W. (author), Terryn, H.A. (author), Mol, J.M.C. (author)
Lithium leaching coatings have recently been developed as eco-friendly active corrosion protection technology for aerospace aluminium alloys (AAs) by the formation of a conversion layer at coating defects. While general conversion layer formation characteristics were studied and reported before, here we study the local layer formation process...
journal article 2021
document
Kosari, A. (author), Tichelaar, F.D. (author), Visser, P. (author), Taheri, P. (author), Zandbergen, H.W. (author), Terryn, H.A. (author), Mol, J.M.C. (author)
Lithium salts have been proposed as promising environmentally friendly alternatives to carcinogenic hexavalent chromium-based inhibitors for the corrosion protection of aerospace aluminium alloys (AAs). Incorporated into organic coatings, lithium salts are released at damaged locations to establish a conversion layer in which distinct...
journal article 2021
document
Fayolle-Chambe, M.S. (author), Dirkx, D. (author), Visser, P.N.A.M. (author), Lainey, V. (author)
Context. The apparent close encounters of two satellites in the plane of the sky, called mutual approximations, have been suggested as a different type of astrometric observation to refine the moons' ephemerides. The main observables are then the central instants of the close encounters, which have the advantage of being free of any scaling...
journal article 2021
document
Nedeljković, Marija (author), Mylonas, Akis (author), Wiktor, Virginie (author), Schlangen, E. (author), Visser, Jeanette (author)
Fine recycled concrete aggregates (fRCA, 0–4 mm) are produced from demolished concrete structures and consist of natural aggregates and old cement mortar. The presence of old cement mortar has detrimental effect on the fresh properties and strength of new concrete. This study aims to investigate the working mechanism and effectiveness of...
journal article 2021
document
Denkers, J. (author), Brunner, Marvin (author), van Gool, Louis (author), Visser, Eelco (author)
Within the printing industry, much of the variety in printed applications comes from the variety in finishing. Finishing comprises the processing of sheets of paper after being printed, e.g. to form books. The configuration space of finishers, i.e. all possible configurations given the available features and hardware capabilities, are large....
conference paper 2021
document
L’Ortye, J. (author), Mitici, M.A. (author), Visser, H.G. (author)
At the interface between airport airside and landside operations, the assignment of flights to gates is key to ensure efficient operations and a high quality of service for passengers. We propose a mixed-integer linear program for an integrated flight-to-gate assignment that considers both airside as well as landside constraints on the...
journal article 2021
document
Saukko, Annina E.A. (author), Nykänen, Olli (author), Sarin, Jaakko K. (author), Nissi, Mikko J. (author), te Moller, Nikae C.R. (author), Weinans, Harrie (author), Mancini, Irina A.D. (author), Visser, Jetze (author), Brommer, Harold (author)
To prevent the progression of posttraumatic osteoarthritis, assessment of cartilage composition is critical for effective treatment planning. Posttraumatic changes include proteoglycan (PG) loss and elevated water content. Quantitative dual-energy computed tomography (QDECT) provides a means to diagnose these changes. Here, we determine the...
journal article 2021
document
Kosari, A. (author), Ahmadi, M. (author), Tichelaar, F.D. (author), Visser, P. (author), Gonzalez Garcia, Y. (author), Zandbergen, H.W. (author), Terryn, H.A. (author), Mol, J.M.C. (author)
Cerium-based compounds have been studied for decades as non-toxic candidates for the protection of aerospace aluminium alloys (AAs) like AA2024-T3. However, the complex heterogeneous microstructure of these alloys has hindered a thorough understanding of the subsequent stages of corrosion protection provided by this class of inhibitors. Thus,...
journal article 2021
document
van Gelder, P.H.A.J.M. (author), Taebi, B. (author), van Ommen, J.R. (author), van de Poel, I.R. (author), Asveld, L. (author), Balkenende, R. (author), Hollmann, F. (author), van Kampen, E. (author), Krebbers, R.J. (author), de Lange, J. (author), Terwel, K.C. (author), Visser, Eelco (author)
In this paper, we provide an overview of how Safe-by-Design is conceived and applied in practice in a large number of engineering disciplines. We discuss the differences, commonalities, and possibilities for mutual learning found in those practices and identify several ways of putting those disciplinary outlooks in perspective. The considered...
journal article 2021
document
Schrama, F.N.H. (author), Beunder, Elisabeth M. (author), Panda, Sourav K. (author), Visser, Hessel Jan (author), Moosavi-Khoonsari, Elmira (author), Hunt, Adam (author), Sietsma, J. (author), Boom, R. (author), Yang, Y. (author)
The optimal hot metal desulphurisation (HMD) slag is defined as a slag with a sufficient sulphur removal capacity and a low apparent viscosity (η<sub>slag</sub>) which leads to low iron losses. In part I of this study, the fundamentals behind the optimal slag were discussed. In this part these fundamentals are explored by a Monte Carlo...
journal article 2021
document
Gurvits, L. (author), Paragi, Zsolt (author), Amils, Ricardo I. (author), van Bemmel, Ilse (author), Casasola, Viviana (author), Conway, John (author), Masania, K. (author), Rajan, R.T. (author), Visser, P.N.A.M. (author)
Ultra-high angular resolution in astronomy has always been an important vehicle for making fundamental discoveries. Recent results in direct imaging of the vicinity of the super-massive black hole in the nucleus of the radio galaxy M87 by the millimeter VLBI system Event Horizon Telescope (EHT) and various pioneering results of the Space VLBI...
conference paper 2021
document
Nedeljković, Marija (author), Visser, Jeanette (author), Nijland, Timo G. (author), Valcke, Siska (author), Schlangen, E. (author)
In circular concrete design, beside cement replacement with more environmentally friendly cement types, there is also an urgent need for sand replacement with fine recycled concrete aggregates (fRCA). The variations in physical and chemical properties of fRCA and lack of standards for their quality evaluation are the main reasons for not yet...
journal article 2021
document
Liu, Y. (author), Noomen, R. (author), Visser, P.N.A.M. (author)
We develop a Gravity Assist Mapping to quantify the effects of a flyby in a two-dimensional circular restricted three-body situation based on Gaussian Process Regression (GPR). This work is inspired by the Keplerian Map and Flyby Map. The flyby is allowed to occur anywhere above 300 km altitude at the Earth in the system of Sun-(Earth+Moon)...
journal article 2021
document
Hendriks, P. (author), Berkhout, W. E.M. (author), Kaanen, C.I. (author), Sluijter, J.H. (author), Visser, I. J. (author), van den Dobbelsteen, J.J. (author), de Geus-Oei, L. F. (author), Webb, A. (author), Burgmans, M.C. (author)
Purpose: To investigate the performance of two microwave ablation (MWA) systems regarding ablation volume, ablation shape and variability. Materials and Methods: In this ex vivo study, the Emprint and Amica MWA systems were used to ablate porcine livers at 4 different settings of time and power (3 and 5 minutes at 60 and 80 Watt). In total,...
journal article 2021
document
Alfaro Barrantes, J.A. (author), Mastrangeli, Massimo (author), Thoen, David (author), Visser, Sten (author), Bueno Lopez, J. (author), Baselmans, J.J.A. (author), Sarro, Pasqualina M (author)
This paper describes the microfabrication and electrical characterization of aluminum-coated superconducting through-silicon vias (TSVs) with sharp superconducting transition above 1 K. The sharp superconducting transition was achieved by means of fully conformal and void-free DC-sputtering of the TSVs with Al, and is here demonstrated in up...
journal article 2021
document
Schrama, F.N.H. (author), Beunder, Elisabeth M. (author), Panda, Sourav K. (author), Visser, Hessel Jan (author), Moosavi-Khoonsari, Elmira (author), Sietsma, J. (author), Boom, R. (author), Yang, Y. (author)
In hot metal desulphurisation (HMD) the slag will hold the removed sulphur. However, the iron that is lost when the slag is skimmed off, accounts for the highest costs of the HMD process. These iron losses are lower when the slag has a lower viscosity, which can be achieved by changing the slag composition. A lower slag basicity decreases the...
journal article 2021
Searched for: +
(81 - 100 of 626)

Pages