Efficiency analysis and optimisation of DEM for railway ballast track simulations: Multi-layer shape model of lateral resistance

The railway ballast layer provides the function of bearing loading, resisting geometry degradation, and drainage. In those related research, the behaviour of ballast assembly can be obtained by laboratory (or in-situ) tests. Limited simulation methods can be used to analyse the behaviour of ballast particles at the mesoscopic level. The...

Design of a concept wedge-shaped self-levelling railway sleeper

Differential railway track settlement can result in ballast voids, leading to sleepers that hang from the rail and are no longer supported by the ballast. These hanging sleepers are damage for track component. As a solution, this paper proposes and investigates a new concept sleeper with a wedge-shaped geometry, intended to stimulate the...

Numerical analysis of train-track-subgrade dynamic performance with crumb rubber in ballast layer

Crumb rubber (CR) has been proposed to apply in the ballast or sub-ballast layer for ballast degradation mitigation and vibration (noise) reduction. The CR can change the ballast layer stiffness, which can affect the train-track-subgrade dynamic performance and cause travel comfort and safety issues. Towards this, this study aims at...

Experimental and numerical study on lateral and longitudinal resistance of ballasted track with nailed sleeper

Lateral and longitudinal resistance of ballasted track are two main indicators for the track stability quantification. Aiming at improving the lateral and longitudinal resistance, nailed sleeper is studied with single sleeper push tests (SSPTs) and discrete element modelling (DEM). The SSPTs were applied to study how much resistance the...

Experimental and numerical study on lateral resistance of frictional sleeper with arrowhead groove

To enhance the stability of continuous welded rail (CWR) tracks, frictional sleepers have been developed. The frictional sleepers are new types of sleepers with grooves on the bottom, and different bottom grooves improve lateral resistances at different magnitudes. In this study, single sleeper push test (SSPT) and its model with discrete...

Rheology study of ballast-sleeper interaction with particle image Velocimetry (PIV) and discrete element modelling (DEM)

Ballast rheology is a phenomenon that describes movements of ballast particles due to the discrete nature, which eventually leads to the ballast bed fluid deformation after a long-time service. In most cases, ballast rheology is the main reason of track irregularity that leads to some track defects, e.g., hanging sleeper and mud spots....

Discrete element modelling of rubber-protected ballast performance subjected to direct shear test and cyclic loading

The rubber-protected ballast (RPB) is made from natural ballast particles and crumb rubber particles. The crumb rubber is shredded waste tires. RPB was chosen to replace the ballast as it has higher resistance to breakage and abrasion. However, the static and dynamic performance of the RPB has not been confirmed yet. Towards this end,...

Effect of sleeper bottom texture on lateral resistance with discrete element modelling

The lateral stability of ballasted track becomes more important because of the safety requirement under the demand of higher train speed and heavier axle load. To increase the lateral resistance of ballast bed, this paper proposes three types of new sleepers, frictional sleepers. The frictional sleepers are sleepers with different shapes of...

Ballast Mechanical Performance with and without Under Sleeper Pads

With the train speed and axle load increasing, excessive stresses are produced and transmitted to the ballast layer, inducing rapid ballast degradation. To solve this issue, the under sleeper pads (USPs) have been widely applied between sleepers and ballast particles as the elastic layer. In this research, laboratory tests using half-sleeper...

Effects of crumb rubber size and percentage on degradation reduction of railway ballast

Higher speed, more freight and frequent maintenance increase ballast degradation and reduce the ballast lifespan. To reduce ballast degradation, crumb rubber used as buffering aggregates in ballast bed is relatively unexplored and needs more studies, because using it has the advantage of reusing the waster rubber and absorbing the noises. The...

Experimental and numerical investigations on the shear behaviour of recycled railway ballast

Ballast degradation is frequently observed under cyclic loading, and results in bearing capacity and drainage problem of ballast track. To keep the stability and safety, periodical maintenances are needed, such as cleaning and replacement, which produce a huge amount of wasted ballast. Thus, reusing the deteriorated ballast can become a...

Ballast degradation: Effect of particle size and shape using Los Angeles Abrasion test and image analysis

Ballast track is the most widely used track for the railway transport, and ballast bed plays a significant role to provide resistances during train operation. Generally, the ballast bed consists of crushed stones. To achieve the mitigation of ballast degradation, the first priority is to describe the degradation development and to study its...