- document
-
Wu, Dequan (author), Ma, Lingwei (author), Liu, Bei (author), Zhang, Dawei (author), Minhas, Badar (author), Qian, Hongchang (author), Terryn, H.A. (author), Mol, J.M.C. (author)This study investigated the deterioration of a lubricant-infused anodic aluminium oxide surface in a 1 M NaCl solution for ∼200 days. Direct observation by cryo-SEM and quantitative analyses by UV spectroscopy and EIS revealed that the long-term deterioration of the lubricant-infused surface was divided into two stages: the surface-adhered...journal article 2021
- document
-
Munirathinam, B. (author), van Dam, J.P.B. (author), Herrmann, Annemarie (author), van Driel, W.D. (author), De Buyl, F. (author), Erich, S. J.F. (author), van der Ven, L.G.J. (author), Adan, O. C.G. (author), Mol, J.M.C. (author)In general, packaging materials which encapsulate light emitting diodes (LEDs) and microelectronic devices offer barrier protection against several environmental hazards such as water and ionic contaminants. However, these encapsulants may provide pathways for water and ionic contaminants to reach the metal/polymer interfaces and provoke local...journal article 2021
- document
-
Bakhit, Babak (author), Dorri, Samira (author), Kooijman, A.M. (author), Wu, Zhengtao (author), Lu, Jun (author), Rosen, Johanna (author), Mol, J.M.C. (author), Hultman, Lars (author), Petrov, Ivan (author), Greene, J. E. (author), Greczynski, Grzegorz (author)Refractory transition-metal (TM) diborides have high melting points, excellent hardness, and good chemical stability. However, these properties are not sufficient for applications involving extreme environments that require high mechanical strength as well as oxidation and corrosion resistance. Here, we study the effect of Cr addition on the...journal article 2021
- document
-
Dong, J. (author), Tümer, N. (author), Putra, N.E. (author), Zhu, Jia-Ning (author), Li, Y. (author), Leeflang, M.A. (author), Taheri, P. (author), Fratila-Apachitei, E.L. (author), Mol, J.M.C. (author), Zadpoor, A.A. (author), Zhou, J. (author)Additively manufactured (AM) biodegradable magnesium (Mg) scaffolds with precisely controlled and fully interconnected porous structures offer unprecedented potential as temporary bone substitutes and for bone regeneration in critical-sized bone defects. However, current attempts to apply AM techniques, mainly powder bed fusion AM, for the...journal article 2021
- document
-
Kosari, A. (author), Zandbergen, H.W. (author), Tichelaar, F.D. (author), Visser, P. (author), Terryn, H.A. (author), Mol, J.M.C. (author)Liquid-phase transmission electron microscopy (LP-TEM) has provided corrosion scientists with a unique opportunity to directly correlate nanoscopic morphological and compositional evolutions to the corresponding electrochemical response of corroding thin TEM specimens. Electrochemical liquid cell designs are key components of a LP-TEM study...journal article 2021
- document
-
Putra, N.E. (author), Leeflang, M.A. (author), Taheri, P. (author), Fratila-Apachitei, E.L. (author), Mol, J.M.C. (author), Zhou, J. (author), Zadpoor, A.A. (author)Additively manufactured biodegradable porous iron has been only very recently demonstrated. Two major limitations of such a biomaterial are very low biodegradability and incompatibility with magnetic resonance imaging (MRI). Here, we present a novel biomaterial that resolves both of those limitations. We used extrusion-based 3D printing to...journal article 2021
- document
-
Visser, P. (author), Ranade, S. (author), Laird, J. S. (author), Glenn, A. M. (author), Hughes, A. E. (author), Terryn, H.A. (author), Mol, J.M.C. (author)Depletion depths of inorganic components from a scribe edge in a polyurethane primer containing Li<sub>2</sub>CO<sub>3</sub>, MgO, BaSO<sub>4</sub> and TiO<sub>2</sub> beneath a topcoat, were determined using a range of techniques including SEM/EDS and proton induced X-ray and γ-ray emission spectroscopies. SEM of sections cut using an ion...journal article 2021
- document
-
Kosari, A. (author), Tichelaar, F.D. (author), Visser, P. (author), Zandbergen, H.W. (author), Terryn, H.A. (author), Mol, J.M.C. (author)Lithium leaching coatings have recently been developed as eco-friendly active corrosion protection technology for aerospace aluminium alloys (AAs) by the formation of a conversion layer at coating defects. While general conversion layer formation characteristics were studied and reported before, here we study the local layer formation process...journal article 2021
- document
-
Kosari, A. (author), Tichelaar, F.D. (author), Visser, P. (author), Taheri, P. (author), Zandbergen, H.W. (author), Terryn, H.A. (author), Mol, J.M.C. (author)Lithium salts have been proposed as promising environmentally friendly alternatives to carcinogenic hexavalent chromium-based inhibitors for the corrosion protection of aerospace aluminium alloys (AAs). Incorporated into organic coatings, lithium salts are released at damaged locations to establish a conversion layer in which distinct...journal article 2021
- document
-
Pyurbeeva, Eugenia (author), Hsu, C. (author), Vogel, David (author), Wegeberg, Christina (author), Mayor, Marcel (author), van der Zant, H.S.J. (author), Mol, Jan A. (author), Gehring, P. (author)Single molecules are nanoscale thermodynamic systems with few degrees of freedom. Thus, the knowledge of their entropy can reveal the presence of microscopic electron transfer dynamics that are difficult to observe otherwise. Here, we apply thermocurrent spectroscopy to directly measure the entropy of a single free radical molecule in a...journal article 2021
- document
-
Tiringer, U. (author), van Dam, J.P.B. (author), Abrahami, S.T. (author), Terryn, H.A. (author), Kovač, J. (author), Milošev, I. (author), Mol, J.M.C. (author)The sol-gel synthesis process is a versatile method used to produce a wide diversity of materials and is being increasingly used as a surface modification method to alter porosity, wettability, catalytic activity, biocompatibility and corrosion performance of underlying substrates. Silane sol–gel films deposited on aluminium and aluminium...review 2021
- document
-
Kosari, A. (author), Ahmadi, M. (author), Tichelaar, F.D. (author), Visser, P. (author), Gonzalez Garcia, Y. (author), Zandbergen, H.W. (author), Terryn, H.A. (author), Mol, J.M.C. (author)Cerium-based compounds have been studied for decades as non-toxic candidates for the protection of aerospace aluminium alloys (AAs) like AA2024-T3. However, the complex heterogeneous microstructure of these alloys has hindered a thorough understanding of the subsequent stages of corrosion protection provided by this class of inhibitors. Thus,...journal article 2021
- document
-
Chen, Guangmeng (author), Wen, Shifeng (author), Ma, Jiacheng (author), Sun, Zhiyong (author), Lin, Cunguo (author), Yue, Zhufeng (author), Mol, J.M.C. (author), Liu, M. (author)Multifunctional intrinsic self-healing polymers (ISP) are gaining increasing attention these days, and many studies have been devoted to solving the conflict between achieving high mechanical polymer strength and active polymer chain diffusion. In this research, we developed an optimized self-healing composite coating by adding Benzotriazole ...journal article 2021
- document
-
Li, Z. (author), Chang, Weiwei (author), Cui, Tianyu (author), Xu, Dake (author), Zhang, Dawei (author), Lou, Yuntian (author), Qian, Hongchang (author), Song, Hao (author), Mol, J.M.C. (author), Cao, Fahe (author), Gu, Tingyue (author), Li, Xiaogang (author)Microbiologically influenced corrosion of metals is prevalent in both natural and industrial environments, causing enormous structural damage and economic loss. Exactly how microbes influence corrosion remains controversial. Here, we show that the pitting corrosion of stainless steel is accelerated in the presence of Shewanella oneidensis MR...journal article 2021
- document
-
Cutz, L. (author), Tiringer, U. (author), Gilvari, H. (author), Schott, D.L. (author), Mol, J.M.C. (author), de Jong, W. (author)The use of biomass pellets as a source of renewable energy has increased in recent times. However, pellet storage during transportation can compromise their properties, due to fluctuating temperature and humid environments. Here, we show that extended storage of one month at 40 °C and 85% relative humidity causes significant biomass pellet...journal article 2021
- document
-
Gilvari, H. (author), Cutz, L. (author), Tiringer, U. (author), Mol, J.M.C. (author), de Jong, W. (author), Schott, D.L. (author)Biomass pellets provide a pivotal opportunity in promising energy transition scenarios as a renewable source of energy. A large share of the current utilization of pellets is facilitated by intensive global trade operations. Considering the long distance between the production site and the end-user locations, pellets may face fluctuating storage...journal article 2020
- document
-
Visser, P.M. (author), Mol, M.A. (author)Context. A double planet system or planet binary undergoes eclipses that modify the reflective light curve. In the time domain, the eclipse events are fast and weak. This would make their signal difficult to find and recognize in the phase light curve, even for small inclinations when eclipses happen frequently. However, due to the quasiperiodic...journal article 2020
- document
-
Harzheim, Achim (author), Sowa, Jakub K. (author), Swett, Jacob L. (author), Briggs, G. Andrew D. (author), Mol, Jan A. (author), Gehring, P. (author)The power factor of a thermoelectric device is a measure of the heat-to-energy conversion efficiency in nanoscopic devices. Yet, even as interest in low-dimensional thermoelectric materials has increased, experimental research on what influences the power factor in these systems is scarce. Here, we present a detailed thermoelectric study of...journal article 2020
- document
-
Bosboom, J. (author), Mol, M. (author), Reniers, A.J.H.M. (author), Stive, M.J.F. (author), de Valk, C. F. (author)Although commonly used for the validation of morphological predictions, point-wise accuracy metrics, such as the root-mean-squared error (RMSE), are not well suited to demonstrate the quality of a high-variability prediction; in the presence of (often inevitable) location errors, the comparison of depth values per grid point tends to favour...journal article 2020
- document
-
Kosari, A. (author), Visser, P. (author), Tichelaar, F.D. (author), Eswara, S. (author), Audinot, J. N. (author), Wirtz, T. (author), Zandbergen, H.W. (author), Terryn, H.A. (author), Mol, J.M.C. (author)This work focuses on the cross-sectional characterization of the protective conversion layer formed on AA2024-T3 by lithium-leaching from a polyurethane coating in a corrosive environment. The layer shows a multi-layered arrangement comprising nanoscopic local phases. Transmission electron microscopy (TEM) and complementary high-resolution...journal article 2020