Applicability of Dynamic Inflow Models of HAWT in Yawed Flow Conditions

Horizontal axis wind turbines (HAWTs) experience yaw misalignments due to the physical limitations of yaw controllers and various novel active yaw controls. Moreover, the motion of floating offshore wind turbines (FOWTs) accelerates yaw misalignment. The blade element momentum (BEM) method is widely used due to its computational efficiency for...

The Fluid Dynamic Basis for Actuator Disc and Rotor Theories: Revised Second Edition

The first rotor performance predictions were published by Joukowsky exactly 100 years ago. Although a century of research has expanded the knowledge of rotor aerodynamics enormously, and modern computer power and measurement techniques now enable detailed analyses that were previously out of reach, the concepts proposed by Froude, Betz,...

New dynamic-inflow engineering models based on linear and nonlinear actuator disc vortex models

Two new engineering models are presented for the aerodynamic induction of a wind turbine under dynamic thrust. The models are developed using the differential form of Duhamel integrals of indicial responses of actuator disc type vortex models. The time constants of the indicial functions are obtained by the indicial responses of a linear and...

The wake of an unsteady actuator disc

Blade Element Momentum (BEM) is the most important aerodynamic analysis method for wind turbines. BEM is derived assuming stationary conditions, which limits its ability to model the unsteady aerodynamic effects. This becomes increasingly relevant for the flexible blades of current large-scale turbines, and the employment of passive and active...

Experimental Study Of Flow Field Of An Aerofoil Shaped Diffuser With A Porous Screen Simulating The Rotor

This study presents an experimental investigation on a diffuser augmented wind turbine (DAWT). A screen mesh is used to simulate the energy extraction mechanisms of a wind turbine in experiment. Different screen porosities corresponding to different turbine loading coefficients are tested. Measurements of the axial force and of the velocity...

Verifying the Blade Element Momentum Method in unsteady, radially varied, axisymmetric loading using a vortex ring model.

Although the Blade Element Momentum method has been derived for the steady conditions, it is used for unsteady conditions by using corrections of engineering dynamic inflow models. Its applicability in these cases is not yet fully verified. In this paper, the validity of the assumptions of quasi-steady state and annuli independence of the blade...

On actuator disc force fields generating wake vorticity

Actuator disc calculations can be divided in two categories: force models where, for a prescribed force field, the flow is calculated using a CFD method, and kinematic models, where the wake is calculated based on wake boundary conditions and the force field is known when the velocities are known. In both categories, but specifically for the...