Aeropropulsive Performance Modelling of Over-The-Wing Propulsion at Incidence

A semi-emperical model is developed, able to capture the aeropropulsive performance characteristics of Over-The-Wing propellers at incidence. The model is based on an hypothesis on the interactions of the propeller- and wing-induced flow fields. Effects of these interactions on the both the thrust and lift are written in a form in which the...

Correction: Aeropropulsive Performance Modelling of Over-The-Wing Propulsion at Incidence

A parametric study of serration design for trailing–edge broadband noise reduction

This work discusses the physics of noise reduction achieved from serrated trailing–edges and its impact by the serration design. An experimental campaign is carried out with a benchmark 2D model based on a NACA 63₃–018 airfoil. Different trailing-edge serrations are tested under several flow speeds and angles of attack conditions...

Unsteady flow behaviour of multi-rotors in ground proximity

The unsteady flow behaviour of two side-by-side rotors in ground proximity is experimentally investigated. The rotors induce a velocity distribution interacting with the ground causing the radial expansion of the rotor wakes. In between the rotors, an interaction of the two wakes takes place, resulting in an upward flow similar to a fountain....

A physics-based description and modelling of the wall-pressure fluctuations on a serrated trailing edge

A physical description of the flow mechanisms that govern the distribution of the wall-pressure fluctuations over the surface of a serrated trailing edge is proposed. Three main mechanisms that define the variation of turbulent pressure fluctuations across the serrated edge are discussed and semi-empirical models are formulated accordingly....

Aerodynamic Interactions of Side-by-Side Rotors in Ground Proximity

An experimental investigation is conducted to study the aerodynamic behavior of a two-rotor system in ground proximity. The counter-rotating rotors are placed side-by-side in the hovering condition. The time-averaged and unsteady flow behavior is studied when the rotor-to-rotor lateral distance and the distance between the rotors and the...

Aeroacoustics of sawtooth trailing-edge serrations under aerodynamic loading

The impact of aerodynamic loading on a serrated trailing edge is studied experimentally. Aerodynamic and acoustic measurements are conducted on a sawtooth-shaped trailing edge, retrofitted to a flat plate featuring a trailing-edge flap, and placed at incidence to the free-stream flow. The turbulent flow across the trailing edge is inspected...

Pressure fluctuations from large-scale PIV over a serrated trailing edge

Abstract: Measurements of distributed surface pressure fluctuations over trailing-edge serrations at a Reynolds number Re _θ = 4900 are performed with time-resolved 3D particle imaging velocimetry using helium filled soap bubbles as flow tracers. The sparse velocity vector field obtained with Lagrangian particle tracking is densely...

Pressure spectra from single-snapshot tomographic PIV

The power spectral density and coherence of temporal pressure fluctuations are obtained from low-repetition-rate tomographic PIV measurements. This is achieved by extension of recent single-snapshot pressure evaluation techniques based upon the Taylor’s hypothesis (TH) of frozen turbulence and vortex-in-cell (VIC) simulation. Finite time...

Effect of trailing edge serration-flow misalignment on airfoil noise emissions

The broadband noise generated by the scattering of turbulent flow at the trailing edge of a NACA 0018 airfoil with trailing edge serrations is investigated, varying both the airfoil angle of attack and serration flap angle. Acoustic emissions from the trailing edge are measured using a microphone array. The noise level is observed to be...

HFSB-seeding for large-scale tomographic PIV in wind tunnels

A new system for large-scale tomographic particle image velocimetry in low-speed wind tunnels is presented. The system relies upon the use of sub-millimetre helium-filled soap bubbles as flow tracers, which scatter light with intensity several orders of magnitude higher than micron-sized droplets. With respect to a single bubble generator,...

Flow topology and acoustic emissions of trailing edge serrations at incidence

The flow past a NACA 0018 airfoil with sawtooth trailing edge serrations has been investigated using stereoscopic particle image velocimetry (PIV). The serration flap angle and airfoil incidence are varied in order to study the effect of secondary flow establishing between the suction and pressure sides of the serrations. The flow topology...

PIV-based study of a cylindrical roughness element in a hypersonic laminar-boundary layer

In this study, the mean flow organization in the symmetry plane of the recirculation region ahead of a cylindrical roughness element immersed in an incoming laminar boundary layer at Mach number equal to 6.5 is investigated. The flow topology is inspected with planar particle image velocimetry (PIV), InfraRed (IR) Thermography and Schlieren flow...

A seeding system for large-scale Tomographic PIV in aerodynamics

3D pressure imaging of an aircraft propeller blade-tip flow by phase-locked stereoscopic PIV

The flow field at the tip region of a scaled DHC Beaver aircraft propeller, running at transonic speed, has been investigated by means of a multi-plane stereoscopic particle image velocimetry setup. Velocity fields, phase-locked with the blade rotational motion, are acquired across several planes perpendicular to the blade axis and merged to...

Surface pressure and aerodynamic loads determination of a transonic airfoil based on particle image velocimetry

The present investigation assesses a procedure to extract the aerodynamic loads and pressure distribution on an airfoil in the transonic flow regime from particle image velocimetry (PIV) measurements. The wind tunnel model is a two-dimensional NACA-0012 airfoil, and the PIV velocity data are used to evaluate pressure fields, whereas lift and...

Transonic airfoil aerodynamic characterization by means of PIV

PIV-based surface pressure and aerodynamic loads determination on a transonic airfoil